Panasonic PXV3H8950 Air Purifier Instruction Manual

: June 12, 2024
: Panasonic

Table of Contents

Panasonic PXV3H8950 Air Purifier
Product Information
Usage Instructions
SAFETY PRECAUTIONS
SETTING AND OPERATING REQUIREMENTS
PRODUCT FEATURES
MAIN PARTS IDENTIFICATION
SETUP
OPERATION
MAINTENANCE
TROUBLESHOOTING
SPECIFICATIONS
Documents / Resources

Panasonic PXV3H8950 Air Purifier

Product Information

Product Name: Air Purifier
Model Number: 197
Usage: Indoor use only

Product Features:

The air purifier is designed to improve indoor air quality by removing allergens, dust, and odors.
It has a compact and sleek design that fits well in any room.
The purifier uses advanced filtration technology to capture particles as small as 0.3 microns.
It has multiple fan speed settings for customized airflow.
The purifier operates quietly, making it suitable for use in bedrooms or offices.
It is energy-efficient and eco-friendly.

Main Parts Identification:

Power cord
Control panel with buttons and indicator lights
Air intake grill
Air outlet grill
Filter compartment

Setup:

Place the air purifier on a flat and stable surface.
Ensure that the power cord is easily accessible and not tangled.
Plug the power cord into a properly grounded electrical outlet.

Usage Instructions

Power On/Off: Press the power button to turn on the air purifier. Press it again to turn it off.
Fan Speed Adjustment: Use the fan speed buttons to adjust the airflow according to your preference.
Sleep Mode: Press the sleep mode button to activate the sleep mode, which operates the purifier at a lower fan speed and reduces noise levels.
Maintenance and Cleaning:
- Disconnect the power supply before performing any maintenance.
- Clean the air intake and outlet grills regularly using a soft cloth or brush.
- Refer to the user manual for detailed cleaning instructions.
Filter Replacement:
- Replace the filter when the filter replacement indicator light turns on or as recommended by the manufacturer.
- Follow the instructions provided in the user manual for proper filter replacement.
When Idle for a Long Time: If the air purifier will not be used for an extended period, unplug it from the power outlet and store it in a dry and clean place.
Further Information: Refer to the FAQ section in the user manual for additional information and troubleshooting tips.
Optional Accessories: Check the user manual for any optional accessories available for the air purifier.

Safety Precautions:

Disconnect the power supply before performing any maintenance.
Do not let the product get wet or place cups or other objects on it.
Do not use power other than the rated voltage.
Keep the product out of reach of children and ensure they are supervised when near it.
Follow all safety symbols and instructions provided in the manual to prevent injury or damage to properties.

Warranty:

Fill out the attached warranty card with the correct information, including the date of purchase and the name of the distributor.
Keep the warranty card in a safe place along with the operating instructions for future reference.

SAFETY PRECAUTIONS

Disconnect power supply before maintenance
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for the safety.
Children should be supervised to ensure that they do not play with the product.
The safety precautions should be strictly followed in order to prevent injury or damage to properties
The following symbols differentiate the levels of danger or injury that may result if the product is not used correctly as instructed.

WARNING
Those things shown in this column indicate that there is possibility of causing death or severe injury.

CAUTION

Those things shown in this column indicate that there is possibility of causing minor injury or damage to properties .
The following symbols are used to indicate the type of instructions that need to be followed. (The symbols given below are examples)
****This symbol indicates an action that must not be performed.
****This symbol indicates an action that must be performed.

WARNING

Do not pull the power cord when carrying or storing the product.(Otherwise, the power cord may be damaged with the possibility of fire or electric shock.)
Do not damage the power cord or power plug.
Do not cut, modify, excessive distort, twist, squeeze the power cord, and do not place it near heat sources, place heavy weight on it, etc. (Otherwise, the power cord may be damaged with the possibility of fire or electric shock.)
Do not let the product get wet.
Do not place cups, etc. on the product. (Otherwise, the product may short circuit with the possibility of fire or electric shock.)
Do not use power other than the rated voltage. (Otherwise, the power cord may overheat and induce fire.)
Do not touch the power plug with wet hands. (Otherwise, electric shock may occur.) ****

WARNING

Do not insert your fingers, metallic objects or others into the air inlet, air outlet or gaps.(Otherwise, you may be hurt by the inner units with the possibility of electric shock or injury.)
****Do not disassemble or modify the product. (Otherwise, the product may catch fire or malfunction, thus resulting in fire or electric shock.)
Contact the dealer for repair.
Clean the power plug regularly.(If dust is found on the power plug, insulation maybe damaged by humidity and fire may occur.)
Disconnect the power plug and wipe it with dry cloth.
When the product will not be used for a long period, disconnect the power plug.
Insert the power plug completely. (If the power plug is not fully inserted, the power cord may be overheated, thus resulting in fire or electric shock.)
Do not use damaged power plug or loose power socket
In case of any abnormality or malfunction, stop using the product immediately and disconnect the power plug. (Otherwise, electric shock, fire or smoke may occur.)

< Examples of abnormality/ malfunction>

The product stops operating when moving the power cord.
If any switches do not work.
If the circuit breaker is tripped or when fuse blows.
If the power cord or power plug becomes abnormally hot.
If you notice a burning smell or an abnormal sound or vibration.
If there is any other abnormalities or malfunction
Please stop using the product immediately and disconnect the power plug, and contact the dealer to check and repair.

CAUTION

Do not place the product in the following places.
Incline and unstable place. (Otherwise, the product may fall over and injury may occur or damage the product.)
Where the temperature or humidity is extremely high, or watery area, such as bathroom.(Otherwise, current may leak with the possibility of fire or electric shock.)
Where oil fume is emitted, such as in kitchens.(Otherwise, the product may crack and injury may occur.)
Where oil or inflammable gas is present and may be leaked.(Otherwise, a fire may occur due to ignition in the product.)
Where the air outlet faces animals or plants directly.(Otherwise, it may cause discomfort to the animals and dry out the plant.)
Do not place the product near combustible materials such as lighted cigarette, incense, etc.(Otherwise, these may be absorbed into the product with possibility of fire.)
When disconnecting the power plug, hold the power plug instead of the power cord.(Otherwise, the power cord may be damaged with the possibility of fire or electric shock.)
Do not clean the product with gasoline or other volatile mixture solvents, and avoid contacting with spray insecticides.(Otherwise, the product may crack or short circuit with the possibility of injury, fire or electric shock.)
Do not operate this product in places where indoor fumigation type insecticides are being used.(Chemical residue may build up inside the product and discharge from the air outlet, and cause damage to health.)
Ventilate the room with fresh air thoroughly after using insecticides before operating the product.
Do not sit on or lean against this product. (Otherwise, the product may fall over and injury may occur or damage the product.)
Families with children should pay more attention.
When carrying the product, please hold the left and right handles, but not the front panel.(Otherwise, the product may fall off, injury may occur.)

CAUTION

Keep the room well-ventilated when using the product together with a burner.(Otherwise, carbon monoxide poisoning may occur.)
This product cannot remove carbon monoxide.

SETTING AND OPERATING REQUIREMENTS

**Area that can enhance the effectiveness!

**

Way to against PM2.5 and indoor dust, etc.
We recommend you to place the product on flat floor in the room.
Way to circulate air more effectively.
Place the product with its left, right and top about 30 cm or more away from walls, furniture or curtains, etc. Otherwise, the pollutants are difficult to be cleared.
To ensure effectiveness of this product, keep its back at least 1 cm away from the wall.
If the product is used in the same place for a long period.
It may result in dirty surrounding walls or floor. We recommend that you move the product away from where it is placed when maintaining it.
Do not use the same power socket with TV, radio, etc. (Otherwise, visual disturbances or noises may be caused.)
In this case, insert the power plug into another power socket.
Do not place any object on the product.(Otherwise, an operation error or malfunction may be caused.)
Do not set the product in the following places.
Where the product will be exposed directly to sunlight, outlet of air conditioner or heat, etc. (Otherwise, deformation, degeneration, discolor or malfunction may be occurred.)
Near equipment such as TV and radio.(Otherwise, visual disturbances or noises may be caused.)
Keep the product 1 m or above away from such devices.
Do not place obstacles on the product air inlet and outlet.(Otherwise it may affect product performance.)

PRODUCT FEATURES

“House Dust Catcher” and “nanoe® X” give you clean and fresh air.
House Dust Catcher completely cleaning dust from the air near the floor
Equipped with nanoe® X technology
Compact and stylish design

About nanoe® X

The so-called nanoe® X are charged water purification particles generated by applying high voltage to separate water molecules. nanoe® X features: high moisture content, small particles, high stability, etc.

High moisture content (the moisture content is 1,000 times the moisture content of ordinary anions).
Small particles (about 5 nm – 20 nm (nanometers) in size, able to penetrate deep into the fiber and stratum corneum).
High stability (6 times more stable than a common ion, covering a distance of 10 m or above).
More hydroxyl radicals (up to 4,800 billion of radicals are generated per second).
Weak acidity (with weak acidity features close to that of hair and skin).All of the above features have been tested by SGS-CSTC Standards Technical Services Co., Ltd.

Note: nanoe® and the nanoe® mark are registered trademarks of Panasonic Holdings Corporation. nanoe® X are particulate ions containing hydroxyl radicals whose amount is 10 times that of nanoe®.

MAIN PARTS IDENTIFICATION

** Odor sensor**

Odor senor can detect odor such as smoke, etc.
The sensitivity of sensor can be adjusted. (P.14)

Control panel

nanoe® X indicator
The indicator lights on indicates nanoe® X is being generated. nanoe® X will be generated in all operation modes except you switch off it. ( P.13)

Clean sign
Show the air pollution levels detected by odor sensor. The clean sign can be turned off. (P.15)

Indicates clean
Indicates slight dirty
Indicates dirty

SETUP

Before startup

Fill in the label with the first date of use.

Notice
Make sure to read page 2~5 before setting up the product.

Install filters

Remove the deodorizing filter from the poly bag.

Notice
Please don’t remove the black net of deodorizing filter.

Install filters

Install the filters (2 types) and front panel.

Install deodorizing filter. (There is no distinction between inside and outside, upper and lower)
Install HEPA composite filter. (There is distinction between inside and outside, no distinction between upper and lower) Projections of the product (2 places) With the black side (front side) outside, and align it with the projections of the product.
Install front panel.

Notice: Be sure to install front panel before use.

Power-on
Connect the power plug.

When inserting the power plug, as the odor sensor uses the degree of cleanliness at this time as the standard, we recommend that you plug it in when the air is fresh (such as when there is no cigarette smoke).(The standard of the odor sensor automatically updates itself according to the degree of the indoor cleanliness.)
Press button ****, then the clean sign blinks for about 5 seconds.

OPERATION

Power Off/On

Turn on or off the product.
Press the button to operate. (Air volume indicator lights on)

When using for the first time, operation will begin with the air volume under “Auto”.
Other than the above situations, operation will begin with the air volume from the last time it was stopped.
Press the button again, the product stops operating.

To operate product within 2 minutes after the power plug is inserted, the indicator of air volume under “Auto” will blink about 2 minutes, what it indicates the odor sensor is in the standby mode

Air volume
Select appropriate air volume for purifying air. The indicator will be changed sequentially as figure below.

Turbo Timer

Turbo operation.
Press this button to begin turbo operation

During turbo operation, the clean sign will flash in blue and red. After 10 minutes, the turbo operation ends and will return to the previous operation mode.
Press the button again to deactivate turbo operation. (The indicator turns off.)

Sleep

Sleeping operation.
When this button is pressed, the clean sign will turn off and operate with low air volume.
After 8 hours, the sleeping operation ends and the product stops operating.
Press the button again to deactivate sleeping operation. (The indicator turns off.)

Notice
If power failure occurs when product is operating, the product will restart automatically when power on again, and operate in the mode when power failure.

MAINTENANCE

WARNING
Make sure to disconnect the power plug before cleaning the product. (Otherwise, the product might operate with the possibility of electric shock or injury.)

Notice

For installation and removal methods of front panel and filters, please read P.8~9.
When cleaning, do not leave the removed parts unattended. (Otherwise, it may cause tripping or damage.)
Do not operate the product when the deodorizing filter is removed. (The deodorizing filter cannot function while it is removed.)
When using chemically treated cloth, be sure to follow the instructions carefully.
Do not operate the product when the HEPA composite filter is removed. (Dust will be inhaled into product inner parts, and causes the product breakdown. The HEPA composite filter cannot function while it is removed.)
Do not use the detergents shown below.

Cleaning method

Deodorizing filter

| HEPA composite filter| Deodorizing filter
---|---|---
Replacement period| When the filter replacement indicator lights on. (About once every 3 years) ※
Conditions| When the product inhales the smoke of six cigarettes every day. (Japan Electrical Manufacturers’ Association JEM1467)

When there is dust around the deodorizing filter, remove the dust with a vacuum cleaner, etc.
Do not wash the filter with water.

Filter replacement

After replacement, please connect power plug, then press button for about 3 seconds until the filter replacement indicator turns off, then the reset is completed.
Fill in installation date on the label attached with filter, then stick it on product to cover the old date. (P.8)

(Optional accessories: back cover)

Filter replacement period may be shorten, depending on the environment (such as where smoking is frequent). Please replace it when ineffective.
Notice
- The filter which needs to exchange cannot be used again even it is cleaned, please dispose it as non-flammable garbage.
- If the product is used in a room (especially hotel) with strong odor such as aromatic smell, cigarette smoke or barbecue smell, these odors may adhere to the filter. When the adsorption capacity of filter reaches saturation, odor will also be blown out again with the wind because of excess adsorption. When there is above situation, please clean the HEPA composite filter. If the situation persists, please replace the HEPA composite filter and deodorizing filter, even if the filter replacement indicator is off. In addition, if often used in a room with strong odor, please open the windows to ventilate the room regularly

When idle for a long time

Disconnect power after turning off the product. (The product still consumes power even at rest.)
Maintain the product as usual.
Put the product into poly bag and carton, and keep it in a dry place. (If you overturn it or keep it flat, product malfunctions may occur.)

FURTHER INFORMATION

About nanoe® X

nanoe® X can be switched off
- During operation, press and buttons at the same time for about 3 seconds (nanoe® X indicator lights off). Press the buttons for about 3 seconds again to restart the nanoe® X. (nanoe® X cannot be set during product stops operating.)
Conditions for nanoe® X generation
- Relative humidity: about 30%～85%
  nanoe® X is generated by using the air in the room. Therefore, due to the differences in temperature and humidity nanoe® X may not be generated stably.
- Room temperature: about 5 ℃～35 ℃ (dew-point temperature: 2 ℃ or above)
- Relative humidity: about 30%～85%
When nanoe® X is generated, small amount of ozone will be released. However, the quantity will be far less than the level in natural environment such as forest, and not be harmful to human beings.

About HEPA composite filter

The HEPA composite filter which with the Bio-sterilization and Super Allergy- buster can inhibit allergens (pollen, dead mites and feces), bacteria, mold.

Super Allergy-buster: inhibits the activity of allergic substances (pollen, dead mites and feces).
- Testing authority: Osaka Municipal Technical Research Institute
- Test method: check the decrease of refined house dust mite allergen, by using enzyme immune measuring method.
- Inhibiting method: contact with Super Allergy-buster
- Target: allergens trapped by the filter (mites, pollen)
- Test result: inhibited 99% and above. (Daikou research report No. 2127)

FURTHER INFORMATION

The HEPA composite filter might emit unique and harmless smell of “Green Tea Catechin”, ”Bio-sterilization” and “Super Allergy-buster”.
Removes ≥99.97% of 0.3 μm particles. it’s dust removing performance of filter itself, the effect in the entire room is not same.
- Test No.: KJ20222779
- Test Standard: JIS B 9908: 2011 Test method of air filter units for ventilation and electric air cleaners for ventilation

About odor sensor

The sensor can detect the pollution of the air, and show the pollution level by indicator. The product can optimize the air volume automatically in auto operation according to the air quality.

Sensor	Sensing scope	May detect
Odor sensor	Odor from cigarettes, incense, cooking, pets Cosmetics, alcohol,
sprays, etc.	Humidity (water vapor), oil The wind generated when a door is

opened or closed, or sudden temperature change

The sensor’s operation may vary depending on the indoor airflow condition if a heater is placed near the product in a room.
The sensor is not designed to detect bacteria and viruses.
The sensitivity of the sensor can be adjusted. (The default setting is “medium sensitivity” .)

Stop operating the product, then press and buttons at the same time for about 3 seconds. The air volume indicator will light on sequentially.
Please release the buttons, when the sensitivity is set as required.

FAQ
Please confirm the following before you put questions forward or send the product for repair.

Why is a “jee” sound from the emission outlet?
There is a slight sound when nanoe® X is being generated. Depends on the environment and operation mode, the sound may be a bit loud or inaudible but it is not abnormal.
Why does the clean sign remain red even when the operation continues?
The indicator may illuminate red when the product is subject to steam or vapor emitting from sprayers.
Why does the clean sign remain blue even when the air is dirty?
Is the product placed in area where the dirty air is difficult to be cleared or the room size is too large for the product? (P. 5, back cover)
How to turn off the clean sign?
Please press and buttons at the same time for about 3 seconds during operation.
Please press the buttons for about 3 seconds again to relight clean sign.

TROUBLESHOOTING

Possible situation	Please confirm the following
Polluted air is difficult to be removed	Is the HEPA composite filter dirty?

(P.12)
Please clean it. If the situation persists, replace the filter with a new one.
The air volume is small
The odor from the product is unpleasant|

Is the body, front panel or filter dirty? (P.12)
If the problem persists after the filter is cleaned, please replace it with a new one. (The harmful carbon monoxide generated by cigarette cannot be removed)
Has the product ever been used in a room with strong odor? If the product is used in a room with strong odor such as aromatic smell, cigarette smoke or barbecue smell, the filter replacement period may be shortened. If you use the product in such environments, it is recommended to open the air ventilation system or open the windows to ventilate the room at the same time. If there is still strong odor to be blown out after the maintenance , please replace the HEPA composite filter and deodorizing filter, even if the filter replacement indicator does not light on.

The sensor sensitivity can not be set up| Is the product turned on?
Sensor sensitivity can not be set up unless the product turned off.

If a problem is encountered, please investigate it by going through the following items.
If the problem still persists, please disconnect the power plug and contact the dealer for repair.

SPECIFICATIONS

The power consumption is about 0.8 W when the operation is set to “Off”. (With the power plug inserted).
Floor area capacity is based on JEM1467, under the condition of Hi speed. (Japan Electrical Manufacturers’ Association)
Note: This product cannot remove hazardous substances such as carbon monoxide from the cigarette smoke.

OPTIONAL ACCESSORIES