twelve south Curve Flex Laptop Stand User Guide
- June 12, 2024
- twelve south
Table of Contents
Curve Flex Laptop Stand
User Guide
What’s in the Box
Curve Flex
(with removable Getting Started guide)
EiTravel Sleeve
(with hidden Adjustment Tool storage pocket inside)
EIAdjustment Tool
(4mm Hex Wrench located in Travel Sleeve pocket)
Adjusting the tension of Curve Flex
Use the included Adjustment Tool to tighten (clockwise) or loosen (counter-
clockwise) the four hinges on Curve Flex.
Using Curve Flex
-
Place Curve Flex on a desk or table.
Raising
and adjusting your Curve Flex while it’s resting on a table is much easier
-and highly recommended. -
Hold A down while gently lifting B to its maximum height.
-
Hold C down while carefully lifting B until you feel it stop.
-
Open your MacBook first, then place on Curve Flex. To adjust height & angle, hold MacBook and Curve Rex together, then gently press down.
To
RAISE the MacBook, REMOVE your MacBook first, extend Curve Flex all the way up
again, then replace MacBook and adjust back down.
Have questions?
Visit twelvesouth.com or contact
support@twelvesouth.com
©2022 Twelve South, LLC.
All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>