ANKER 625 Solar Panel Charge Fast User Manual
- June 12, 2024
- Anker
Table of Contents
Charge Fast, Live More
Anker 625 Solar Panel (100W)
USER MANUAL
Using Your Product
- Unfold Power Solar, use the legs }) to support it, use the Suncoast GJ to align directly to the sun, and when the shadow of the blue dot is in the red circle, Power Solar will capture direct rays for a maximum charge.
- Charge your phone and tablet using the USB-A or USB-C port. Charge your Power House using the XT60 port. If Power Solar is working correctly, the LED indicator wall turn blue.
Note
- Power Solar can’t store electricity directly. You will need a power bank or Power House to store power or cornet Power Solar directly to your devices to charge.
- Charging efficiency is subject to sunlight intensity.
- Keep your phones and tablets away from direct sunlight. Excessive heat may cause damage.
- 100W refers to the power of the solar panel, which is not equal to the actual power of the output ports There will be some power loss when solar energy is transferred into electrical energy, so the actual power of the output ports will be less than the power of the solar panel.
Specifications
Peak Power | 100W |
---|---|
Rated Voltage | 26.5V |
Rated Current | 3.77A |
USB-A Output | 5V -2.4A |
USB-C Output | 5V **** 3A |
Size (folded) | 525x470x85 mm |
Size (unfolded) | 1446x525x45 mm |
Weight | 5 kg |
Important Safety Instructions
- Avoid dropping.
- Do not disassemble
- Do not expose to liquids.
- For the safest and fastest charge, use original or certified cables.
- Open flame sources, such as candles, must not be placed near this product.
- Only use a dry cloth or brush to clean this product.
SAVE THESE INSTRUCTIONS
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful imperf ere nee, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsi61e for compliance could void the user’s authority to operate the
equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
The following importer is the responsible party.
Company Name. Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone· +1-800-988-7973
IC Statement
This device complies with Industry Canada license-lCES-003. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Statement:
This digital apparatus complies with CAN ICES-003(8)/NMB-003(8)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2431 is in
compliance with Directives 2014/30 /EU&2011/65/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.anker.com.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2431 is in
compliance with Electromagnetic Compatibility Regulations 2016 & The
Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012. The full text of the GB declaration of
conformity is available at the following internet address
https://www.anker.com.
Anker Innovations Limited I Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Songkok, Kowloon, Hong Kong
The following importers are the responsible parties (contract for EU and UK
matters):
Anker Innovations Deutschland GmbH I Georg-Much-Strasse 3, 80807 Munich,
Germany
Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford,
Hertfordshire, WD171HP, United Kingdom
Customer Service
| 24-Month limited warranty
---|---
| Lifetime technical support
| Support@anker.com
Support.mea@anker.com (For Middle East and
Africa Only)
| (US/CA)+ 1 (800)988 7973
(UV) +44 (0) 1604 9 ~6200
Please note that your rights under duplicable law governing the sale of consumer goods remain unaffected by the warrantee. given in this Limited Warranty
For FAQs and more information, please visit: anker.com/support
| |
---|---|---
@anker_official
@anker -jp| @ Anker Deutschland
@Anker Japan
@ Anker| @Anker Official
@ Anker-JP
Ricotta Carta
Produr.t Number· A2431 51005003286 V04