FENTON DMS40 Speaker Dj Monitor User Manual
- June 12, 2024
- FENTON
Table of Contents
FENTON DMS40 Speaker Dj Monitor
Product Information
Product Name: Fenton DJ Monitor Speakers
Model Number: 170.172
Power: 2x 100 Watts Max Power, 2x 30 Watts RMS
Impedance: 8 Ohm
Frequency Range: 70Hz – 20kHz
SPL (Sound Pressure Level): 90dB (1W/1m)
Woofer Size: 115mm
Tweeter Size: 70mm
Dimensions: 174 x 250 x 180mm each
Weight: 3kg each
Product Usage Instructions
- Congratulations on your purchase of the Fenton DJ Monitor Speakers. Before using the speakers, please read the following instructions carefully.
- Safety Instructions:
- Clipping (overdrive) of the amplifier can damage the woofer, tweeter, and horn speaker. Please ensure not to exceed the recommended power limits.
- Recycle packaging material whenever possible to protect the environment.
- Do not dispose of a faulty unit in normal household waste. Instead, bring it to a special collection point for recycling.
- Connections:
- If connecting a second speaker in parallel, the impedance will change from 8 Ohms to 4 Ohms. Ensure that your amplifier can handle this change. Note that connecting more than two speakers in parallel will result in an impedance below 4 Ohms, which most amplifiers cannot handle.
- Important Notes:
- Do not attempt to repair the unit yourself, as it will void your warranty. Any modifications made to the unit will also invalidate the warranty.
- The warranty does not cover accidents or damages caused by inappropriate use or failure to follow the safety recommendations and warnings provided in this manual.
- Tronios cannot be held responsible for any personal injuries or damages resulting from disregarding the safety recommendations and warnings.
For any further information or support, please visit the official website: www.tronios.com
Basic connections
Cable Connector
SPECIFICATION
- Model : 170.172
- Power Max. 2x 100W
- Power RMS 2x 30W
- Impedance 8 Ohm
- Freq. Range 70Hz – 20kHz
- SPL 1W/1m 90dB
- Woofer size 115mm
- Tweeter size 70mm
- Dimensions 174 x 250 x 180mm each
- Weight 3kg each
Congratulations to the purchase of our Fenton speaker box. Read the instructions thoroughly prior to using the unit.
SAFETY INSTRUCTIONS
-
Hearing damage:
Fenton loudspeakers are easily generating high sound pressure levels (SPL) sufficient to cause permanent hearing damage to performers, production crew and audience members. Care should be taken to avoid prolonged exposure to SPL in excess of 85 dB. -
Make sure that the amplifier is switched off when the speaker box is connected or disconnected.
-
The box must be installed by a qualified technician who has knowledge of the techniques.
-
Do not overload the box to avoid damage to the speakers.
-
Connect the box only to a good quality amplifier:
Direct voltage at the amplifier output will damage the speakers “Clipping” (overdrive) of the amplifier can damage the woofer, tweeter and horn speaker -
Do not overload the speakers to avoid damage to the components.
-
Do not place an open fire (candle, etc.) on top or next to the box – FIRE HAZARDFor indoor use only. If the box is used outdoors, you need to make sure that no humidity can enter the box.
-
Make sure that the box is placed on a stable, solid surface.
-
The boxes can be stacked but do not put more than 60kg weight on the box.
-
The boxes can be hung. Use only strong and approved mounting material. The installation should only be carried out by a qualified technician who has knowledge of the techniques and regulations regarding the mounting/hanging of speaker boxes. During the mounting, make sure that nobody is standing below the mounting area.
-
Use only stands which are designed to support the weight of the speaker. Do not attempt to place more than one speaker on a stand designed for a single speaker.
-
Do not place liquids on the box and protect it against humidity. Humidity can shorten the life time considerably.
-
Only use suitable means of transportation if you want to move the box – BEWARE OF YOUR BACK!!
-
If the unit is damaged to an extent that internal parts are visible, DO NOT connect the unit and DO NOT switch it on. Contact your dealer or Tronios.
-
Never try to repair the unit yourself. It does not contain any user serviceable parts. All repairs must be carried out by a qualified technician.
-
Set the amplifier to the lowest volume prior to switching it on.
-
Keep the unit out of the reach of children.
Protect your environment. Recycle packing material whenever possible.
Do not throw a faulty unit into normal household waste but bring it to a special collection point. A large part of it can be recycled.
CONNECTIONS
First of all, check the specifications of the amplifier if it is suitable for
your speaker boxes. Pay particular attention to the power rating and
impedance.
Check if the amplifier is switched off. If yes, you can switch on the
speakers. PLEASE NOTE! Watch the polarity (+/-). Wires of the same colour must
be connected to the same sign of every side i.e. the + of the amplifier must
be connected to the + of the speaker box. If the connections are inverted, the
sound quality will diminish.
Only use high quality speaker cables that are suitable for the power and
distance between the amplifier and the speaker.
Connection of several speakers:
When a second speaker is connected in parallel the impedance will change from
8 Ohms to 4 Ohms. Check if the amplifier can handle this. If more that two
speakers are connected in parallel, the impedance will go below 4 Ohms. Most
of the amplifiers can’t handle this!
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by
inappropriate use or disrespect of the warnings contained in this manual.
Tronios cannot be held responsible for personal injuries caused by a
disrespect of the safety recommendations and warnings. This is also applicable
to all damages in whatever form.
TECHNICAL SPECIFICATION
The specifications are typical. The actual values can slightly change from one
unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community
Directives to which they are subject:
European Union
Tronios B.V.,
Bedrijvenpark Twente Noord 18, 7602KR Almelo, The Netherlands
2014/35/EU
2014/30/EU
2011/65/EC
United Kingdom
Tronios Ltd.,
130 Harley Street, London W1G 7JU, United Kingdom
S.I. 2016:1101
S.I. 2016:1091
S.I. 2012:3032
Specifications and design are subject to change without prior notice.
www.tronios.com
Copyright © 2022 by TRONIOS the Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>