Bosch PUE Induction Hob Instruction Manual

Bosch PUE Induction Hob

Product Information

The product is an induction hob. It is designed for cooking purposes and is equipped with various safety features to ensure safe usage.

Product Usage Instructions

Safety Instructions

• WARNING: Risk of fire! Leaving fat or oil cooking on an unattended hob can be dangerous and may lead to fires. Never leave hot oil or fat unattended. Never attempt to extinguish a fire using water.
• WARNING: Risk of burns! The appliance and its parts that can be touched become hot during use, particularly the hob surround, if fitted. Caution should be exercised here in order to avoid touching heating elements. Young children under 8 years of age must be kept away from the appliance. Hob protective grilles may cause accidents. Never use hob protective grilles. The appliance becomes hot during operation. Allow the appliance to cool down before cleaning. Metal objects on the hob quickly become very hot. Never place metal objects (such as knives, forks, spoons, and lids) on the hob.
• WARNING: Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist staff. Only use genuine spare parts when repairing the appliance. If the power cord or the appliance power…

Avoiding Material Damage

• The insulation on cables of electrical appliances may melt if it touches hot parts of the appliance. Never bring electrical appliance cables into contact with hot parts of the appliance.
• If metallic objects come into contact with the fan that is located on the underside of the hob, this may cause an electric shock. Do not store long, pointed metallic objects in the drawers below the hob.
• Saucepans may suddenly jump due to liquid between the saucepan base and the hotplate. Always keep hotplates and saucepan bases dry. Never use icy-cold cookware that has been in the freezer.
• When cooking in a bain marie, the hob and cooking container could shatter due to overheating. The cooking container in the bain marie must not directly touch the bottom of the water-filled pot. Only use heat-resistant cookware.
• An appliance with a cracked or broken surface can cause cuts. Do not use the appliance if it has a cracked or broken surface.
• WARNING: Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from children. Do not let children play with packaging material. Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts.

Avoiding Common Causes of Damage

This section provides tips on how to avoid common causes of damage to the product. Please refer to the user manual for detailed information.
Register your new device on MyBosch now and get free benefits: bosch- home.com/welcome

Safety

Observe the following safety instructions.

General information

• Read this instruction manual carefully.
• Keep the instructions, the appliance and the product information safe for future reference or for the next owner.
• Do not connect the appliance if it has been damaged in transit.

Intended use

Only a licensed professional may connect ap-pliances without plugs. Damage caused by incorrect connection is not covered under the warranty.
The appliance can only be used safely if it is correctly installed according to the safety in-structions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.

Only use this appliance:

• To prepare meals and drinks.
• Under supervision. Never leave the appliance unattended when cooking for short periods.
• in private households and in enclosed spaces in a domestic environment.
• up to an altitude of max. 4000 m above sea level.

Do not use the appliance:

With an external timer or a separate remote control. This does not apply if the operation with appliances included in EN 50615 is switched off.
If you wear an active implantable medical device (e.g. a pacemaker or defibrillator), check with your doctor that it complies with Council Directive 90/385/EEC of 20th June 1990, EN 45502-2-1 and EN 45502-2-2, and that it has been chosen, implanted and programmed in accordance with VDE-AR-E 2750-10. If these conditions are satisfied, and if, in addition, non-metal cooking utensils and cookware with non-metal handles are used, it is safe to use this induction hob as intended.

Restriction on user group

• This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inad-equate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
• Do not let children play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised.
• Keep children under the age of 8 years away from the appliance and power cable.

Safe use

WARNING ‒ Risk of fire!
Leaving fat or oil cooking on an unattended hob can be dangerous and may lead to fires.

• Never leave hot oil or fat unattended.

• Never attempt to extinguish a fire using water; instead, switch off the appliance and then cover with a lid or a fire blanket.
  The cooking surface becomes very hot.

• Never place flammable objects on the cooking surface or in its immediate vicinity.

• Never place objects on the cooking sur-face.
  The appliance will become hot.

• Do not keep combustible objects or aerosol cans in drawers directly underneath the hob.
  Hob covers can cause accidents, for example due to overheating, catching fire or materials shattering.

• Do not use hob covers.
  After every use, switch off the hob using the main switch.

• Do not wait until the hob turns off automatically as there are no longer any pots andpans on it.
  Food may catch fire.

• The cooking process must be monitored. Ashort process must be monitored continu-ously.

WARNING ‒ Risk of burns!
The appliance and its parts that can be touched become hot during use, particularly the hob surround, if fitted.

• Caution should be exercised here in order to avoid touching heating elements.

• Young children under 8 years of age mustbe kept away from the appliance.

• Hob protective grilles may cause accidents.

• Never use hob-protective grilles.

• The appliance becomes hot during operation.

• Allow the appliance to cool down beforecleaning.

• Metal objects on the hob quickly become very hot.

• Never place metal objects (such as knives, forks, spoons and lids) on the hob.

• WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.

• Only use genuine spare parts when repairing the appliance.

• If the power cord or the appliance power cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service.
  If the appliance or the power cord is damaged, this is dangerous.

• Never operate a damaged appliance.

• If the surface is cracked, you must switchoff the appliance in order to prevent a possible electrical shock. To do this, switch offthe appliance via the fuse in the fuse box rather than at the main switch.

• Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.

• If the appliance or the power cable is damaged, immediately switch off the fuse in the fuse box.

• Call customer services. → Page 20

• An ingress of moisture can cause an electricshock.

• Do not use steam- or high-pressure cleaners to clean the appliance

• The insulation on cables of electrical appliances may melt if it touches hot parts of the appliance.
  Never bring electrical appliance cables into contact with hot parts of the appliance.
  If metallic objects come into contact with thefan that is located on the underside of thehob, this may cause an electric shock.

• Do not store long, pointed metallic objects in the drawers below the hob.WARNING ‒ Risk of injury!
  Saucepans may suddenly jump due to liquid between the saucepan base and the hotplate.

• Always keep hotplates and saucepan bases dry.

• Never use icy-cold cookware that has beenin the freezer.

When cooking in a bain marie, the hob and cooking container could shatter due to overheating.

• The cooking container in the bain Marie must not directly touch the bottom of the water-filled pot.
  Only use heat-resistant cookware.

• An appliance with a cracked or broken surface can cause cuts.
  Do not use the appliance if it has a cracked or broken surface.WARNING ‒ Risk of suffocation!

• Children may put packaging material over their heads or wrap themselves up in it and suffocate.
  Keep packaging material away from chil-dren.

• Do not let children play with packaging material.
  Children may breathe in or swallow small parts, causing them to suffocate.

• Keep small parts away from children.

• Do not let children play with small parts

Avoiding material damage

This is where you can find the most common causes of damage and tips on how to avoid them.

sugar content.

| Remove immediately with a glass scraper.
Stains, blisters or fractures in the glass| Defective cookware, cookware with melted enamel or cookware with copper or alu-

minium base.

| Use suitable cookware that is in a good con- dition.
Stains, discolouration| Unsuitable cleaning methods.| Only use cleaning agents that are suitable for glass ceramic, and only clean the hob when

it is cold.

Blisters or fractures in

the glass

| Knocks or falling cookware, cooking ac-

cessories or other hard or pointed objects.

| When cooking, do not hit the glass or let ob-

jects fall onto the hob.

Scratches, discolour-

ation

| Rough cookware bases or moving the cook-

ware on the hob.

| Check the cookware. Lift the cookware when

moving it.

Scratches| Salt, sugar or sand.| Do not use the hob as a work surface or

storage space.

Damage to the appli-

ance

| Cooking with frozen cookware.| Never use frozen cookware.
Damage to the cook-

ware or the appliance

| Cooking without contents.| Never place or heat empty cookware on a

hot cooking zone.

Glass damage| Melted material on the hot cooking zone or hot pot lid on the glass.| Do not place greaseproof paper or alu- minium foil nor plastic containers or pot lids

on the hob.

Overheating| Hot cookware on the control panel or on the

frame.

| Never place hot cookware on these areas.

ATTENTION!
A fan is located on the underside of this hob.

• If a drawer is located on the underside of the hob, do not store any small or pointed objects, paper or tea towels in it. These objects may be sucked in and damage the fan or impair the cooling.
• There must be a clearance of at least 2 cm between the contents of the drawer and the fan entry point

Environmental protection and saving energy

Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.

• Sort the individual components by type and dispose of them separately.

Saving energy

• If you follow these instructions, your appliance will use less energy.

• Select the cooking zone to match the size of your pan. Centre the cookware on the hob. Use cookware whose base diameter is the same diameter as the hotplate.
  Tip : Cookware manufacturers often give the upper diameter of the saucepan. It is often larger than the base diameter.

• Unsuitable cookware or incompletely covered cooking zones consume a lot of energy. Cover saucepans with suitable lids.

• Cooking without a lid consumes considerably more energy.

• Lift lids as infrequently as possible.

• When you lift the lid, a lot of energy escapes.
  Use a glass lid.

• You can see into the pan through a glass lid without having to lift it.
  Use pots and pans with flat bases.

• Uneven bases increase energy consumption.
  Use cookware that is suitable for the quantity of food.

• Large items of cookware containing little food need more energy to heat up.
  Cook with only a little water.

• The more water that is contained in the cookware, the more energy is required to heat it up.
  Turn down to a lower power level early on.

• If you use an ongoing power level that is too high, you will waste energy.
  Product Information according (EU) 66/2014 can be found on the attached appliance pass and online on the product page for your appliance

Suitable cookware

Cookware that is suitable for induction cooking must have a ferromagnetic base, i.e. it must be attracted by a magnet. The base must also match the size of the cooking zone. If cookware is not detected on a cooking zone, place this on the cooking zone with the next smallest diameter.

Size and characteristics of the cookware

To correctly detect the cookware, take the size and the material of the cookware into consideration. All cookware bases must be perfectly flat and smooth.
You can use Cookware test to check whether your cookware is suitable. You can find more information about this under → “Cookware test”, Page 15

Notes

• Do not use adapter plates between the hob and the cookware.
• Do not heat up empty cookware and do not use cookware with a thin base, as this may become very hot.

Familiarising yourself with your appliance

Control panel

Individual details, such as colour and shape, may differ from the figure

Note : Always keep the control panel clean and dry.
Tip : Do not place any cookware near the displays or buttons. The electronics may overheat.

Touch fields
When you switch on the hob, the symbols for the controls available at this time light up.

Indicators/symbols

Buttons in connection with Home Connect
As soon as the connection to Home Connect has been established, the following buttons and displays are available
If lights up, search for further information in the Home Connect app.

Distribution of the cooking zones

The specified power has been measured with the standard pots which are described in IEC/EN 60335-2-6. The power may vary depending on the size of the cookware or cookware material.

Cooking zone
Before you start cooking, check whether the size of the cookware fits the cooking zone that you want to use for cooking:

Residual heat indicator
The hob has a residual heat indicator for each cooking zone. Do not touch the cooking zone if the residual heat indicator is lit.

Before using for the first time

Observe the following recommendations.

• Initial cleaning
  Remove any leftover packaging from the hob surface and wipe the surface with a damp cloth. You can find a list of recommended detergents on the official website www.bosch-home.com.
  More information on care and cleaning. → Page 18

• Cooking with induction
  In comparison to conventional hobs, induction technology brings with it a series of changes and has a number of benefits such as time savings when cooking and frying, energy savings as well as greater ease of cleaning and care. It also offers improved heat control as the heat is generated directly in the cookware.

• Cookware
  You can find a list of recommended cookware on the official website www.bosch- home.com. Further information on suitable cookware. → Page 5

• Setting Home Connect
  When you first switch on the appliance, you will be prompted to set your home network. ⁠ lights up for a few seconds on the display panel.
  To begin the connection to Home Connect, touch and proceed in accordance with the information in the section → “Home Connect “, Page 15.
  To end the setting, switch off the hob.
  You can also adjust the Home Connect setting at a different time.

Software update

If the appliance is connected to Home Connect, some functions may be available with a software update. More information on the availability of additional functions can be found on the website www.boschhome.com

Basic operation

Switching on the hob

Touch ⁠.
A signal sounds. The symbols for the cooking zones and the currently available functions light up. lights up in the cooking zone displays.
The hob is ready to use.

ReStart
If you switch the appliance on within four seconds of switching it off, the hob operates with the settings that were previously set.

Switching the hob off

Touch until the displays go out.
All cooking zones are switched off.
Note : If all of the cooking zones are switched off for longer than 59 seconds, the hob is automaticallyswitched off.

Setting the power level in the cooking zones
The cooking zone has 17 power levels, which are displayed from to with intermediate values. Select the best power level for the food and the planned cooking process.

1. Touch the required cooking zone display a and light up.
2. Select the required power level in the settings area. a The power level has been set.
   Note : If no cookware is placed on the cooking zone or the pot is not suitable, the selected power level flashes.
   After a certain period of time, the cooking zone switches itself off.

QuickStart
If you set one or more items of cookware on any cooking zone before switching on the appliance, the hob detects this and automatically selects the cooking zone for one of the items of cookware. Then select the power level in the next 59 seconds, or the hob will switch off

Cooking tips

• When heating up puree, cream soups or thick sauces, stir occasionally.
• To preheat, set the power level 8-9.
• When cooking with the lid on, reduce the power level as soon as you see steam escaping. The cooking result is not affected by the steam escaping.
• After cooking, place a lid on the cookware until you serve the dish.
• To cook with the pressure cooker, observe the manufacturer’s instructions.
• Do not cook food for too long, otherwise nutrients will be lost. The kitchen timer enables you to set the optimal cooking time.
• Ensure that the oil does not smoke.
• To brown the food, fry it in small portions, one after the other.
• Some items of cookware may reach high temperatures while the food is cooking. You should therefore use oven gloves.
• You can find recommendations for energy-efficient cooking under → “Saving energy”, Page 5

Cooking recommendations

The table shows which power level ( ) is suitable for which food. The cooking time ( ) may vary depending on the type, weight, thickness and quality of the food

Changing the power level and switching off the cooking zone

1. Select the cooking zone.
2. Select the required power level or set it to a The cooking zone’s power level is changed or the cooking zone is switched off..

Favourite button
You can use the function to select two functions or cooking settings which can then be quickly accessed on ⁠.

Assigning Favourite button functions
Requirement: Connect the appliance to Home Connect. You can find more information about this under Home Connect → Page 15

1. To assign functions, open the Home Connect app and follow the instructions.
2. As soon as you have assigned the functions, you can use them:
3. Function 1: Press briefly.
4. Function 2: Press and hold ⁠.
   Note : If you have not assigned any functions, switches off once the hob is switched on.

Time-setting options
Your hob has various functions for setting the cooking time:

1. Switch-off timer
2. Timer

The button is assigned to the Switch-off timer function by default. However, you can also assign one of the above-mentioned functions to the sensor.You can change these settings via the Home Connect app or in the basic settings → Page 14.

Switch-off timer
Allows you to programme a cooking time for one or more cooking zones and their automatic switch-off once the time set has elapsed.

Switching on Switch-off timer

1. Select the cooking zone and the power level.

2. Press ⁠. a and light up.

3. Within the next 10 seconds, set the required cooking time in the settings area.
   ‒ You can set intermediate values between 1 minute and 9 minutes in increments of 30 seconds. To do this, use to select the intermediate values.
   ‒ To select a time in hours, e.g. 1 h 30 mins, press the numerical sequence 1 – 3 – 0 in the settings area. If you select a time of more than 60 minutes, the time is automatically displayed in hours.

4. Touch to confirm.

5. Once the cooking time has elapsed, the cooking zone is switched off and a signal sounds.

Notes

• If a cooking time has been programmed in a cooking zone in which the PerfectFry Sensor is activated, the programmed cooking time will start to count down as soon as the selected temperature level has been reached.
• To switch the display between the operating temperature

PerfectFry Sensor and the programmed cooking time, press the selected temperature.

Changing or switching off Switch-off timer

1. Select the cooking zone and then touch ⁠.
2. To switch off the function, change the cooking time or set it to ⁠.

Timer
Enables a clock to be activated. This function operates independently of the cooking zones and other settings. It does not automatically switch off the cooking zones.

Switching on Timer
Requirement: Assign the function to ⁠.

1. Press ⁠.
2. Select the required time.
3. The time starts to elapse.
4. A signal tone sounds and the displays flash once the time has elapsed.

Changing or switching off the Timer

1. Press ⁠.
2. To switch off the function, change the cooking time or set it to ⁠.

PowerBoost

The PowerBoost function enables you to heat up large quantities of water faster than when using ⁠.
This function is available for all cooking zones, provided the other cooking zone on the same side is not in use. Otherwise, ⁠ and ⁠ flash on the display for the selected cooking zone. ⁠ is then set automatically without activating the function.

Switching on PowerBoost

1. Select the cooking zone.
2. Touch
3. The ⁠ display lights up.
4. The function is activated.

Switching off PowerBoost

1. Select the cooking zone.
2. Touch .
3. The ⁠ display goes out and the cooking zone switches back to power level
4. The function is switched off.

Note : In certain circumstances, the appliance switches this function off to protect the electronic elements inside the hob

PanBoost1

• You can use this function to heat up pans more quickly than with . Do not use the PowerBoost function with frying pans – this may damage the coating.
• You can activate the function via Home Connect or Favourite button.
• This function is available for all cooking zones, provided the other cooking zone on the same side is not in use. Otherwise, ⁠ and flash on the display for the selected cooking zone. then switches on automatically.

Recommended applications

• Do not place a lid on the pan.
• Never leave pans unattended when they are heating up.
• Only use cold pans.
• Use pans with a completely flat base. Do not use pans with a thin base.

Switching on PanBoost

Requirement: Assign the function to . → “Favourite button”, Page 10.

1. Select the cooking zone.
2. Touch ⁠.
3. lights up.
4. The function is activated.

Switching off PanBoost

1. Select the cooking zone.
2. Select the power level.
3. goes out
4. The function is switched off.

Note : To avoid high temperatures, this function automatically switches itself off after 30 seconds

Keep-warm function1

• You can use this function to melt chocolate or butter, and to keep meals warm.
• You can activate the function via Home Connect or Favourite button.

Switching on Keep-warm function
Requirement: Assign the function to . → “Favourite button”, Page 10.

1. Select the required cooking zone.
2. Touch ⁠. lights up.
3. The function is switched on.

Switching off Keep-warm function

1. Select the cooking zone.
2. Set to goes out.
3. The function is switched off

Available depending on software version. Further information on availability can be found on the website

PerfectFry Sensor

This function allows you to melt, prepare sauces, sauté, deep fry or fry while keeping the temperature under control.
Instead of constantly adjusting the power level during cooking, select the required target temperature once at the start. The sensors under the glass ceramic measure the temperature of the cookware and keep this constant throughout the entire cooking process.
This function is available on all cooking zones marked with this symbol ⁠.

Recommended cookware
Special cookware has been developed for this function, which delivers the best results.

The recommended cookware is available from customer service, specialist retailers or our online shop www.bosch-home.com.
Note : You can also use other cookware. Depending on the composition of the cookware, the achieved temperature may differ from the selected temperature level

Switching on the PerfectFry Sensor

1. Place the empty cookware on a cooking zone.
2. Select the cooking zone.
3. Press ⁠.
4. and the preset temperature light up on the display for the selected cooking zone.
5. Select the temperature by swiping your finger over the settings area.
6. flashes until the set temperature is reached again.
7. The selected temperature and the development of the temperature reached in the pan flash alternately until the selected temperature has been reached.
8. The temperature shown on the displays is approximate and may differ from the actual temperature in the frying pan.
9. Once the temperature has been reached, a signal tone sounds and as well as the temperature symbol stop flashing.
10. Add the frying fat and then the food to the frying pan.

Note : If you need to cook with more than 250 ml oil, add the oil and wait a few seconds before you add the food.

Switching off PerfectFry Sensor

• Select the cooking zone and touch ⁠.

Recommendations for cooking with PerfectFry Sensor
The following table shows the ideal temperature levels for a selection of dishes. The temperature and the cooking time depend on the amount, condition and quality of the food

Childproof lock
The hob is equipped with a childproof lock. You can use this to prevent children from switching on the hob.

Switching on Childproof lock

Requirement: The hob must be switched off.

• Touch and hold for 4 seconds.
  • lights up for 10 seconds.
  • The hob is locked
• Deactivating the childproof lock
  • To switch on the hob, touch ⁠.
  • Touch and hold for 4 seconds.
  • The lock is released.
• Automatic childproof lock
  • You can also activate the childproof lock automatically every time the hob is switched off.
  • You can find out how to switch the function on and off in the “Basic settings” section → Page 14.

Pause
You can use the function to pause and resume active cooking processes for up to 10 minutes without changing the settings you have selected. You can switch the function on to clean the control panel, for example.

Activating the Pause function

• Press ⁠.
• lights up in the cooking zone displays.
  • All active cooking processes are stopped. The settings are retained.
  • The function is activated.

Deactivating the Pause function

• Touch ⁠.
• The function is switched off. The cooking processes continue.
  Note : After approximately 10 minutes, the cooking zone automatically switches off

Individual safety switch-off

Activate the safety function if one cooking zone is in operation for an extended period and you do not change any settings. The cooking zone displays and switches itself off.
The time depends on the selected power level
Press any button to switch on the cooking zone

Basic settings

You can configure the basic settings for your appliance to meet your needs.

Overview of the basic settings

To go to the basic settings
Requirement: The hob must be switched off.

1. To switch on the hob, touch ⁠.
2. Within the next 10 seconds, touch and hold for 4 seconds.
3. The first four displays provide the product information.
4. Touch to view the individual displays.
5. Touch to access the basic settings.
6.  and light up as a presetting.
7. Touch repeatedly until the desired setting appears.
8. Select the required setting in the settings area.
9. Touch and hold for 4 seconds.
10. This saves the settings.

Discarding changes to the basic settings

• Touch ⁠.
• All changes are discarded and not saved.

Cookware test

The quality of the cookware has a major influence on the speed and the result of the cooking process. You can use this function to test the quality of the cookware. Before the test, ensure that the diameter of the cookware base corresponds to the diameter of the cooking zone being used.
Access is via the basic settings. → Page 14

Carrying out Cookware test

1. At room temperature, place the cookware with approx. 200 ml water in the centre of the cooking zone that best fits the base of the cookware in terms of size.
2. Call up the basic settings and select ⁠ ⁠ ⁠.
3. Touch the settings area. flashes in the cooking zones.
4. The function is switched on After 20 seconds, the result appears in the cooking zone displays.

Checking the result

1. You can see what the result means for the quality and speed of the cooking process in the following table.
2. Note : If you have any unfavourable results, reposition the cookware on a smaller cooking zone, if available. To reactivate this function, touch the settings area

Home Connect

• This appliance is network-capable. Connecting your appliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status.
• The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. You can find information about this at: www.home-connect.com.
• The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings

Tips

• Please consult the documents supplied by Home Connect.
• Please also follow the instructions in the Home Connect app.

Notes
Please note the safety precautions in this instruction manual and make sure that they are also observed when operating the appliance via the Home Connect app. → “Safety”, Page 2

• Hobs are not designed to be left unattended. Always monitor the cooking process.
• Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app.
• In networked standby mode, the appliance requires a maximum of 2 W.

Setting up Home Connect Requirements

• The appliance is connected to the power supply and is switched on.
• You have a mobile device with a current version of the iOS or Android operating system, e.g. a smartphone.
• The mobile device and the appliance are within range of your home network’s WiFi signal.

1. Download the Home Connect app
2. Apple App Store und the Apple App Store logo are trademarks of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC.
3. Open the Home Connect app and scan the following QR code
4. Follow the instructions in the Home Connect app

Wi-Fi symbol
The Wi-Fi indicator on the main screen changes according to the status and quality of the connection and the availability of the Home Connect server.

Adding or removing a Wi-Fi home network
The following overview shows how to add or remove a Wi-Fi home network

Changing settings via the Home Connect app
You can use the Home Connect app to change the settings for the cooking zones and send them to the hob.
Requirement : The hob is connected to the Wi-Fi and to the Home Connect app.

1. Select the setting in the Home Connect app and send it to the hob.
   Follow the instructions in the Home Connect app. Settings that you send from the Home Connect app to the hob must be confirmed on the hob.

2. As soon as cooking settings are transmitted to a cooking zone, the display starts to flash, depending on the setting.

3. Press to confirm the setting.

4. To discard the setting, press any other touch field on the hob.

Available depending on software version. Further information on availability can be found on the website.
As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Once the update has been successfully downloaded, you can start installing it via the Home Connect app if you are in your home network (Wi-Fi). The Home Connect app informs you once installation is successful.

Notes

• The software update consists of two steps.
  • The first step is the download.
  • The second step is the installation on your appliance.
• You can continue to use your appliance as normal while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically.
• Installation takes a few minutes. You cannot use your appliance during installation.
• We recommend that you install security updates as soon as possible.

Remote diagnostics

Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which you are using the appliance.
Tip : For further information and details about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website: www.home-connect.com.

Data protection

Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the

Home Connect server (initial registration):

• Unique appliance identification (consisting of appliance codes as well as the MAC address of the Wi-Fi communication module installed).
• Security certificate of the Wi-Fi communication module (to ensure a secure data connection).
• The current software and hardware version of your appliance.
• Status of any previous reset to factory settings.
  This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time.
  Note : Please note that the Home Connect functions can only be utilised with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.

Hob-based hood control

If the hob and the extractor hood are Home Connectcompatible, connect the appliances in the Home Connect app. To do this, connect the two appliances to Home Connect and follow the instructions in the app.

Notes

• Using the controls on the extractor hood always takes priority. It is not possible to use the hob-based hood control during this time.
• You can only connect to the extractor hood via the
  Home Connect app. Other connection routes are no longer supported

Controlling the extractor hood via the hob

• In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob or individual cooking zones are switched on or off.
• You can select other settings using the controls on the hob.
  Note : If you cannot find these settings for your hob, check the settings of the extractor hood in the Home Connect app to configure the connection.

Connecting the fan
In order to set the hood from the hob, you must first assign the hood function to Favourite button. → “Favourite button”, Page 10

If you assign the hood function , you can choose between setting the fan, automatic mode or the hood lighting.

Setting the fan
Requirement: The function is assigned to FavouriteV button.

1. Press ⁠.
2. Select the required setting in the settings area. You can select the following settings:

Note : Available depending on extractor hood model.

• The fan is switched on.
• Press to switch off the fan.

Switching on automatic mode

You can set automatic mode using the hob’s control panel.
Requirement: The function is assigned to Favourite button

1. To switch on automatic mode, press ⁠.
2. The display lights up.
3. To switch off automatic mode, press ⁠.

Setting the hood lighting
You can switch the hood light on and off using the hob’s control panel

Requirement : The function is assigned to Favourite button.

1. To switch the lighting on, press ⁠.
2. To switch the lighting off, press again.

Overview of the hood control settings

In the basic settings for your hob, depending on the extractor hood model, you can adjust the behaviour of your extractor hood depending on whether the hob or individual cooking zones are switched on or off. If you cannot find these settings for your hob, check the settings of the extractor hood in the Home Connect app to configure the connection. The display shows this setting only when the appliance has been connected to the extractor hood

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.

Cleaning products
You can obtain suitable cleaning products and glass scrapers from customer service, a retailer or the online shop www.bosch-home.com.

ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appliance.

• Never use unsuitable cleaning products.
• Do not use cleaning products while the hob is still hot. This may cause marks on the surface.

Unsuitable cleaning products

• Undiluted detergent
• Detergent intended for dishwashers
• Abrasive cleaning products
• Aggressive cleaning products such as oven spray or stain remover
• Abrasive sponges
• High-pressure or steam jet cleaners

Cleaning the hob
Clean the hob after every use to stop cooking residues from getting burnt on.
Requirement : The hob must be cold. Do not allow the hob to cool down if it has sugar stains, rice starch, plastic or aluminium foil on it.

1. Remove heavy soiling using a glass scraper.
2. Clean the hob with a cleaning agent for glass ceramic.
   Follow the cleaning instructions on the packaging of the cleaning agent.

Tips

• You can achieve good cleaning results using a special sponge for glass ceramic.
• If you keep the base of the cookware clean, the hob surface remains in a good condition.

Cleaning the hob surround

If the hob frame is dirty or stained after use, clean this.
Note : Do not use a glass scraper

1. Clean the hob frame with hot soapy water and a soft cloth.
   Wash new sponge cloths thoroughly before use.

2. Dry with a soft cloth.

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.

WARNING ‒ Risk of injury!
Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• If the appliance is defective, call Customer Service. → “Customer Service”, Page 20

WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord or the appliance power cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service.

Warnings

• If or appears in the displays, press and hold the sensor for the respective cooking zone and read the fault code.
• If the fault code is not listed in the table, disconnect the hob from the power supply and wait 30 seconds before reconnecting it. If this display appears again, contact customer service and specify the exact fault code.
• If an error occurs, the appliance does not switch to standby mode.
• In order to protect the appliance’s electronic parts from overheating or surge currents, the hob may temporarily reduce the power level

Information on the display panel

Normal noises from your appliance

An induction hob may sometimes cause noises or vibrations, such as buzzing, crackling, hissing noises, fan noises or rhythmic noises

Disposing of old appliance
Valuable raw materials can be reused by recycling.

1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally friendly manner.

Information about current disposal methods are available from your specialist dealer or local authority.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

• Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.
  Note : Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website.

• If you contact Customer Service, you will require the product number (E-Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) of your appliance.

• The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

Product number (E-Nr.), production number (FD) and consecutive numbering (ZNr.)
You can find the product number (E-Nr.), the production number (FD) and the consecutive numbering (ZNr.) on the appliance’s rating plate.

The rating plate can be found:

• on the appliance certificate.
• on the lower section of the hob.

The product number (E no.) can also be found on the glass ceramic. You can also display the customer service index (KI) and the production number (FD) in the basic settings. → Page 14
Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

Information regarding Free and Open Source Software

• This product includes software components that are licensed by the copyright holders as free or open source software.

• The applicable licence information is stored on your home appliance. You can also access the applicable licence information via your Home Connect app: “Profile -> Legal information -> Licence Information”.1 You can download the licence information on the brand product website. (Please search on the product website for your appliance model and additional documents). Alternatively, you can request the relevant information from ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany.

• The source code will be made available to you on request.

• Please send your request to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str.34, 81739 Munich, Germany.
  Subject: „OSSREQUEST“

• The cost of performing your request will be charged to you. This offer is valid for three years from the date of purchase or at least as long as we offer support and spare parts for the relevant appliance.

Declaration of Conformity

BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provisions of Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found online at www.bosch- home.com among the additional documents on the product page for your appliance
Hereby, BSH Hausgeräte GmbH declares that the appliance with Home Connect functionality is in compliance with relevant statutory requirements.2
A detailed Declaration of Conformity can be found online at www.bosch- home.co.uk among the additional documents on the product page for your appliance.2 2.4 GHz band (2400–2483.5 MHz): Max. 100 mW 5-GHz band (5150–5350 MHz + 5470–5725 MHz): max. 130 mW

Test dishes

These recommended settings are intended for test institutes to facilitate the testing of our appliances. The tests were carried out using our cookware sets for induction hobs. If required, these accessory sets can be purchased at a later point from specialist retailers, or through our technical after-sales service or our online shop.

Melting the chocolate coating
Ingredients: 150 g dark chocolate (55% cocoa). ¡ 16 cm saucepan without lid – Boiling: Power level 1.5

1. Depending on the appliance specifications
2. Only applies to Great Britain

Heating and keeping lentil stew warm
Recipe in accordance with DIN 44550 Initial temperature 20 °C

Heating up without stirring

• 16 cm saucepan with lid, amount: 450 g
  • Heating up: Duration 1 min. 30 sec., power level 9
  • Simmering: Power level 1.5
• 20 cm saucepan with lid, amount: 800 g
  • Heating up: Duration 2 min. 30 sec., power level
  • Simmering: Power level 1.5

Heating and keeping lentil stew warm

E.g.: Lentil diameter 5–7 mm. Initial temperature 20 °C Stir after heating for 1 minute

• 16 cm saucepan with lid, amount: 500 g
  • Heating up: Duration approx. 1 min. 30 sec.,power level 9
  • Simmering: Power level 1.5
• 20 cm saucepan with lid, amount: 1 kg
  • Heating up: Duration approx. 2 min. 30 sec.,power level 9
  • Simmering: Power level 1.5

Béchamel sauce

Milk temperature: 7 °C

• 16 cm saucepan without lid, ingredients: 40 g but-ter, 40 g flour, 0.5 l milk with 3.5% fat content and apinch of salt

Preparing Béchamel sauce

1. Melt the butter, stir in the flour and salt, and heat upthe mixture.
2. Heating up: Duration 6 min., power level 2
3. Add the milk to the roux and bring to the boil, stir-ring continuously.
4. Heating up: Duration 6 min. 30 sec., power level7
5. Once the Béchamel sauce comes to the boil, leaveit on the cooking zone for a further two minutes.
6. Simmering: Power level 2

Cooking rice pudding with the lid on
Milk temperature: 7 °C

1. Heat the milk until it starts to rise up. Heat up withouta lid. Stir after heating for 10 min.
2. Set the recommended power level and add rice,sugar and salt to the milk.

The cooking time, including heating up, is approx. 45minutes.

• 16 cm saucepan, ingredients: 190 g short-grainrice, 90 g sugar, 750 ml milk with 3.5% fat contentand 1 g salt
  • Heating up: Duration approx. 5 min. 30 sec.,power level 8.5
  • Simmering: Power level 3
• 20 cm saucepan, ingredients: 250 g short-grainrice, 120 g sugar, 1 l milk with 3.5% fat content and1.5 g salt
  • Heating up: Duration approx. 5 min. 30 sec.,power level 8.5
  • Simmering: Power level 3, stir after 10 minutes

Cooking rice pudding without a lid
Milk temperature: 7 °C

• Add the ingredients to the milk and heat the mixtureup while stirring continuously.
• Once the milk has reached approx. 90 °C, select therecommended power level and leave it to simmer on alow heat for approx. 50 minutes.

1. 16 cm saucepan without lid, ingredients: 190 gshort-grain rice, 90 g sugar, 750 ml milk with 3.5%fat content and 1 g salt
2. Heating up: Duration approx. 5 min. 30 sec.,power level 8.5
3. Simmering: Power level 3
4. 20 cm saucepan without lid, ingredients: 250 gshort-grain rice, 120 g sugar, 1 l milk with 3.5% fatcontent and 1.5 g salt
5. Heating up: Duration approx. 5 min. 30 sec.,power level 8.5
6. Simmering: Power level 2.5

Cooking rice
Recipe in accordance with DIN 44550
Water temperature: 20 °C

• 16 cm saucepan with lid, ingredients: 125 g long-grain rice, 300 g water and a pinch of salt
  • Heating up: Duration approx. 2 min. 30 sec.,power level 9
  • Simmering: Power level 2
• 20 cm saucepan with lid, ingredients: 250g long-grain rice, 600 g water and a pinch of salt
  • Heating up: Duration approx. 2 min. 30 sec.,power level 9
  • Simmering: Power level 2.5

Roasting a pork loin
Initial temperature of the loin: 7 °C

• 24 cm pan without lid, ingredients: 3 pork loins,total weight approx. 300 g, 1 cm thick, and 15 gsunflower oil
  • Heating up: Duration approx. 1 min. 30 sec.,power level 9
  • Simmering: Power level 7

Preparing crêpes
Recipe in accordance with DIN EN 60350-2

• 24 cm pan without lid, ingredients: 55 ml batter percrêpe
  • Heating up: Duration 1 min. 30 sec., power level9
  • Simmering: Power level 7

Deep-fat frying frozen chips

• Pot dia. 20 cm without lid: ingredients: 2 l sunfloweroil. For each frying time: 200 g frozen chips, 1 cmthick.
  • Heating up: Power level 9, until the oil temperat-ure reaches 180 °C.
  • Simmering: Power level 9

Thank you for buying a Bosch Home Appliance!

Register your new device on MyBosch now and profit directly from:

• Expert tips & tricks for your appliance
• Warranty extension options
• Discounts for accessories & spare-parts
• Digital manual and all appliance data at hand
• Easy access to Bosch Home Appliances Service

Free and easy registration – also on mobile phones: www.bosch- home.com/welcome

Looking for help? You’ll find it here.

• Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts.
• Find out everything about the many ways Bosch can support you: www.bosch-home.com/service
• Contact data of all countries are listed in the attached service directory

BSH Hausgeräte GmbH
Carl-Wery-Straße 34 81739 München, GERMANY
www.bosch-home.com
A Bosch Company

Valid within Great Britain:
Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom

References

• Home Appliances Global Website | Bosch
• Bosch home appliances: Experience quality, reliability and precision | Bosch UK
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch
• Connect your household | Home Connect

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>