sygonix 2799086 Rewireable Flat Angled Plug Instruction Manual
- June 13, 2024
- Sygonix
Table of Contents
sygonix 2799086 Rewireable Flat Angled Plug
Product Information
The Rewireable Flat Angled Plug is a product designed for electrical connections. It comes with item number 2799086 and is manufactured by an undisclosed company. The product includes the following:
- Delivery contents
- Product
- Operating instructions
For the latest information about the product, you can download the product information from the website www.conrad.com/downloads or scan the QR code provided in the user manual. Follow the instructions on the website to access the updated information.
Product Usage Instructions
Safety Instructions
Before using the Rewireable Flat Angled Plug, it is essential to read and
follow the safety instructions provided in the user manual. Failure to adhere
to these instructions may result in personal injury or damage to property, and
it may also void the
warranty/guarantee. The general safety instructions include:
- The product is not a toy and should be kept out of the reach of children and pets.
- Do not leave packaging material lying around carelessly, as it may become dangerous playing material for children.
- If you have unanswered questions about the product, contact the technical support service or other technical personnel.
- Maintenance, modifications, and repairs should only be done bya technician or an authorized repair center.
Handling
Handle the Rewireable Flat Angled Plug with care to avoid any damage. Even a fall from a low height or jolts/impacts can harm the product.
Operating Environment
Ensure that the product is not subjected to mechanical stress and protect it from extreme temperatures, strong jolts, flammable gases, steam, solvents, high humidity, moisture, and direct sunlight. If the product is taken from a cold to a warm environment, allow it to reach room temperature before use to prevent condensation that may damage the product.
Operation
If you have any doubts about the operation, safety, or connection of the product, consult an expert. If it is no longer possible to operate the product safely, take it out of operation and protect it from further use. Additionally, ensure that you follow the safety and operating instructions of any other devices connected to the product.
Remember the five safety rules:
- Disconnect from the mains
- Protect against accidental switch-on
- Ensure there is no voltage
- Earth and short-circuit
- Cover or protect adjacent live parts
Use suitable tools, measuring devices, and personal protective equipment when necessary. Analyze measurement results and use electrical installation materials that meet the disconnection requirements. Consider the IP protection ratings and installelectrical installation materials according to the type of power supply (TN system, IT system, TT system) and the corresponding connection criteria.
Intended use
- The product is a rewireable flat plug. It can be used in tight spaces (e.g., behind furniture) and has a handle to make it easier to disconnect from the socket.
- The product is intended for indoor use only. Do not use it outdoors.
- Contact with moisture must be avoided under all circumstances.
- If you use the product for purposes other than those described, the product may be damaged.
- Improper use can result in short circuits, fires, electric shocks or other hazards.
- The product complies with the statutory national and European requirements.
- For safety and approval purposes, you must not rebuild and/or modify the product.
- Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
- All company names and product names are trademarks of their respective owners. All rights reserved.
Delivery contents
- Product
- Operating instructions
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The symbol warns of hazards that can lead to personal injury.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
- Do not switch the product on after it has been taken from a cold to a warm environment. The condensation that forms might destroy the product. Allow the product to reach room temperature before you use it.
Operation
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
Connected devices
- Also observe the safety and operating instructions of any other devices which are connected to the product.
Electrical installation
WARNING! Safety hazard!
The product should only be installed by people with relevant electrical
knowledge and experience! *) If it is not installed properly, you risk:
- your own life
- the life of user of the electrical device
- severe damage to property, e.g., by fire
- personal liability for personal injury and material damage
Always consult an electrician!
*) Technical knowledge required to perform the installation:
For the installation, the following specialist knowledge is required in
particular:
- The “Five safety rules”: Disconnect from the mains; protect against accidental switch-on; ensure there is no voltage; earth and short-circuit; cover or protect adjacent live parts
- Use of suitable tools, measuring devices and personal protective equipment, where necessary
- Analysis of measurement results
- Use of electrical installation materials to meet the requirements for disconnection
- IP protection ratings
- Installation of electrical installation materials
- Type of power supply (TN system, IT system, TT system) and the corresponding connection criteria (classic earthing, protective earthing, necessary additional measures etc.)
If you are not a professional, do not do it yourself, have it performed by a specialist.
Wiring
Cleaning and care
Important:
- Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damagethe housing and can cause the product to malfunction.
- Do not immerse the product in water.
- Disconnect the product from the power supply.
- Clean the product with a dry, fibre-free cloth.
Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed
of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators, which are not enclosed by the WEEE, as well as lamps that can be
removed from the WEEE in a non-destructive manner, must be removed by end
users from the WEEE in a non-destructive manner before it is handed over to a
collection point.
Distributors of electrical and electronic equipment are legally obliged to
provide free take-back of waste. Conrad provides the following return options
free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
Technical data
- Rating ……………………………………………. 250 V/AC, 16 A
- Power ……………………………………………. max. 3680 W
- Cable inlet ………………………………………. 3-wire max. ø9 mm (1.5 mm2)
- Operating / storage conditions …………… -20 to +40 °C, ≤85 % RH (non-condensing)
- Dimensions (W x H x D) …………………… 75 x 37 x 47 mm
- Weight …………………………………………… 37 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2799086_V2_0723_dh_mh_en 18014399350989323-2 I3/O2
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>