PELCO VXP-P3-36-JT VideoXpert Professional Power 3 Server User Guide
- June 13, 2024
- PELCO
Table of Contents
PELCO VXP-P3-36-JT VideoXpert Professional Power 3 Server User Guide
Before You Begin
Before you connect and configure your system:
- Update your new Video Xpert™ Software to the latest version, which is available at www.pelco.com.
- Ensure that the Microsoft OS on each computer on your system, including this server, has the latest updates that address the most current known vulnerabilities. You can find this information at www.microsoft.com.
On a continual basis:
- Frequently update the OS to ensure newly discovered vulnerabilities are patched as soon as a patch is available.
- Frequently update anti-virus libraries with the latest patches
Initial System Configuration
Your Video Management System (VMS), Video Xpert™, comes fully prepared for
use, with all drives and software installed. Just plug in your system, and you
are ready to begin using Video Xpert Professional (Vx Pro)™.
For more information about your VxPro hardware and software, go to
www.pelco.com/vxpro.
About Vx Pro
- VxPro Server™ records video, routes media, administers users and permissions, and performs all the server-side operations that you would expect from your VMS.
- System performance varies based on your environment (for example: the number of channels).
- VxToolbox™ is the administrative application for VxPro; from Toolbox, you can configure VxPro servers and find cameras.
Locating Connections on the Front Panel
- Power button and indicator
- Do not use (VGA port)
- USB 2.0 port
- iDRAC direct port
Locating Connections on the Back Panel
- Mini Display ports, use instead of VGA (5)
- RJ-45 ports (10/100/1000 Mbps)
- iDRAC port
- USB 2.0 port (top) and USB 3.0 port (bottom)
Setting Up Your System
- Unpack the server.
- (Optional) Mount the Power 3 Server in a rack.
The Power 3 Server ships with a cable management mount bracket at the end of each rack rail, as shown in the red box in the image below.
This extends the server depth to 1000 mm, as opposed to 800 mm. To mount the Power 3 Server in a rack:
* For a standard rack that has 800 mm depth, remove the cable management mount brackets from the rack rails.
* For a rack that has 1000 mm depth, do not remove the cable management mount brackets.
- Connect the system and its peripherals.
- Connect the monitor to an independent video controller (item 3 in Locating Connections on the Back Panel); onboard VGA is disabled.
- Connec the VxPro system to the network using one of the Ethernet ports (item 5 in Locating Connections on the Back Panel).
- You can also connect to the iDRAC port item 6 in Locating Connections on the Back Panel) to configure and monitor the system remotely; however, the iDRAC port will not connect the VxPro system to the network.
- Connect both power supply units (item 4 in Locating Connections on the Back Panel) to an electrical outlet.
- Power on the system by pressing the power button on the front panel or using iDRAC
Getting Started with VxPro
Upon starting your VxPro system, you will start a fully-functional 60-day trial of the VxPro software. You must install a license before the 60-day period is over to continue using VxPro.
-
Start your VxPro hardware.
-
Log on using the following default Windows user account credentials:
- Username: Pelco
- Password: Pel2899100
-
Pelco recommends that you change the default Windows password immediately, to secure access to the system.
This automatically opens the Initialize Pelco VideoXpert Professional window. -
Click Get Started. This starts the initialization process.
Note: This also starts the 60-day trial of the VxPro software. -
If the initialization process is interrupted, or you need to launch it again for any reason, do one of the following:
- Log out and log back in.
- Reboot the system.
-
When prompted by VxToolbox (which launches automatically), set the password for the admin user on your VxPro system, and then click Set Password.
-
When prompted, enter the Company Name and the VideoXpert System Name, and then click Save. This is the information by which the Pelco licensing portal will recognize your VxPro server.
Caution: After these values are set, they cannot be changed. -
Exit VxToolbox.
Go to www.pelco.com/vxpro to download and upgrade to the latest version of the VxPro software. -
Launch VxToolbox from the desktop icon.
-
Click the System tab, click the General Settings tab on the System page, and then enter a friendly name in the VideoXpert System Name field. This is the name by which VxOpsCenter workstations and aggregation servers will recognize your VxPro server.
-
Click Save Settings.
-
Find and add cameras to the VxPro system:
a. Click the Devices tab.
b. Click the Advanced Discovery Options icon ( ) to the right of the
Quick Discovery icon ( ).
c. Click Quick Discovery and Add.
All Devices and Data Sources that are discovered by VxToolbox are added to the
VxPro system to which you are connected
VxPro is now recording cameras and ready to be accessed by VxOpsCenter workstations. You can add users to the system, manually add cameras, configure events, or perform other administrative and operator tasks. For more information about VxPro hardware and software, and to access the current version of the VideoXpert Professional Operations Manual, go to www.pelco.com/vxpro
Caution: The 60-day trial of the VxPro software has begun. Before the 60-day period is over, activate SUPs and install all channel licenses for your system. See the current version of the VideoXpert Professional Operations Manual for instructions.
Pelco, Inc.
625 W. Alluvial Ave., Fresno, California 93711 United States
800-289-9100 Tel
800-289-9150 Fax
+1 559-292-1981 International Tel
+1 559-348-1120 International Fax
www.pelco.com
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the ONVIF logo are trademarks of ONVIF Inc. All other product names and services are the property of their respective companies. Product specifications and availability are subject to change without notice.
© Copyright 2022, Pelco, Inc. All rights reserved.
References
- Your request has been blocked. This could be due to several reasons.
- Your request has been blocked. This could be due to several reasons.
- CCTV Camera System & Video Security Solutions | Pelco
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>