TooQ TQE-2503G 2.5 SATA USB3.1 External Enclosure User Manual

TQE-2503G

2,5” STORAGE ENCLOSURE – SATA
User manual

TooQ 2,5” storage enclosure is Plug & Play and allows you to connect your SATA disk (HDD or SSD) through a USB 2.0 port to any device.

For your safety and correct use of this product, please read this instruction manual carefully before beginning installation.

Specifications of the external enclosure

• USB 3.0/3.1 Gen 1 connection. Up to 5.0 Gbps.
• Compatible with 2.5”, HDD o SSD up to 9,5mm thick and 2 TB capacity.
• SATA I,II,III.
• Type of supported files: FAT32 / NTFS/ APFS/ eXT4/ HFS+
• UASP protocol supported
• Plug & Play, no driver installation required.
• LED power indicator and reading
• Screwless installation
• Colour: Grey
• Dimensions:: 123x78x14 mm

Package content

• 1 x External enclosure
• 1 x USB 3.0 type Micro-B to USB 3.0 type A cable.
• 1 x Anti-slip pad
• 4 x Screws
• 1 x User’s manual

System Requirements

• Have a USB port on the device you want to connect.
• Compatible with Windows, Mac and Linux.

The PCB board of the enclosure is very sensitive to electrostatic discharges. Be sure to release static electricity before mounting the storage enclosure.

Hard disk installation in the external enclosure

1. Open by sliding the back of the external enclosure.
2. Remove the PCB board and install the hard disk. Then, fix the disk with the 4 screws.
3. Place the PCB board carefully with the installed disk inside the enclosure and close it by sliding the back side.
4. Connect the USB-A end of the cable to the device and the Micro USB end to the external enclosure. The transfer speed will be adapted to the USB port version of the device.

Disk partition and file format

If the disk is new, it will not be recognized by the system until you create partitions and format it.

This operation can be performed in systems based on:

Windows: Equipment (Right button) → Manage → Storage → Disk administrator.

Mac: Finder → Go → Utilities → Disk Utility.

Linux: System → System Administration → Disk Utility.

Warranty Information

TooQ offers a guarantee of 24 months from the time of purchase, so it is essential to have the ticket or invoice where the date appears. The distributor or dealer from whom you purchased this product will handle your claim and provide technical service while the warranty is in effect. The storage enclosure should show the serial number without having been altered or erased, if it is not intelligible, the warranty will not be applied.

Out of Warranty

The warranty does not cover the effects and damage caused to the storage enclosure due to:

• Do not follow the user manual.
• Modifications or alterations of any kind.
• High and low temperatures, humidity and contact with liquids.
• Wear and scratches caused to everyday use.

The warranty does not cover damage or defects to the hard drive caused by improper use of the hard drive or the storage enclosure.

FAQ

Can be found frequently asked questions on our website www.tooq.com under the product link.

Products may suffer variations due to stock change, product improvement or printing error. If you have any doubt, please contact us.

• AII specifications are subject to change without notice.
• Products may not be available in all markets.
• Product color and bundled software versions are subject to change without notice.
• Brand and product names mentioned are trademarks of their respective companies.

©2023 by TooQ Technology, S.L.
Released in 2023/05.
AII Rights Reserved.
tooq.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>