Anker A2673 335 Charger User Manual

: June 13, 2024
: Anker

Table of Contents

SERIES 3

Anker 335 Charger

(67W)

USER MANUAL

Attention

Read all the instructions before using the product.

The product is designed for use with IT equipment only.
Naked flame sources, such as candles, must not be placed on the product.
The disconnection from line voltage is made by AC plug.
In case of broken plugs, the product must be disposed of.
If you want to clean the product, only use a dry cloth or brush.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).

Using Your Product

Anker A2673 335 Charger A1

For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 79733

IC Statement

This digital apparatus complies with CAN ICES-003(B)/NMB003(B).

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A2673 is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com

Hereby, Anker Innovations Limited declares that the product type A2673 is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address:
https://www.anker.com.

Indoor use only
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

The following importer is the responsible party (contract for EU and UK matters)

Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany

Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

Specifications

Input	100V-240V~50/60Hz 1.8A
Output	Use One Port, Output/1

USB-C1/C2: 5V⎓3A/9V⎓3A/12V⎓3A/15V⎓3A/20V⎓3.35A (67W Max)
USB-A: 4.5V⎓5A/5V⎓4.5A/5V⎓3A/9V⎓2A/12V⎓1.5A (22.5W Max)Use Two Ports, Output/2
USB-C1+USB-C2: 67W Max
USB-C1+USB-A: 67W Max
USB-C2+USB-A: 24W MaxUse Three Ports, Output/3
USB-C1+USB-C2+USB-A: 66W Max
Total Output: 67W Max
PPS| Support PPS
Average active efficiency| 83.91%
Efficiency at low load (10%) | 69.30%
No-load power consumption| 0.209W
Operating temperature| 0-25℃ / 32-77 ℉
Note: To ensure electrical safety and product performance, the output power may fluctuate based on the ActiveShield™ 2.0 safety mechanism when the ambient temperature is between 26- 35°C (78.8-95°F) with a high output load.
ActiveShield™ 2.0 enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices.

Customer Service

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

18-month limited warranty *

Lifetime technical support

support@anker.com
support.mea@anker.com (For Middle East and Africa Only)

(US/CA) +1 (800) 988 7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(Middle East & Africa) +971 42428633
(UAE) +971 8000320817
(KSA) +966 8008500030
(Kuwait) +965 22069086
(Egypt) +20 8000000826
(AU) +61 3 8331 4800
(TR) +90 0850 460 14 14
(RU) +8 (800) 511-86-23
(India) +91 18003138831

For tutorial videos, FAQs, manuals, and more information, please visit:

https://support.anker.com
Or scan the QR code below: