LEZYNE XL 700 LED Zecto Lights User Guide

LEZYNE XL 700 LED Zecto Lights

Product Information

The LED Zecto series lights by Lezyne are compact and versatile bike lights that provide visibility and safety while cycling. These lights are designed to be water-resistant under normal conditions but are not waterproof. They feature a thermal protection system that automatically lowers the lumen output if the operating temperature becomes too high. Please note that these lights do not conform to the German road traffic regulation StVZO.

Warnings

• DO NOT LOOK DIRECTLY INTO LIGHT BEAM or shine into eyes of another person.
• DO NOT SUBMERGE UNDER WATER. The lights are water-resistant but not waterproof.
• DO NOT ATTEMPT TO REMOVE ELECTRONICS. Doing so will void the warranty.
• Lezyne USA, Inc. does not accept any liability for injuries or damages resulting from the use of this product.

Warranty
Lezyne USA, Inc. provides a warranty for the LED Zecto series lights. Please refer to the warranty terms and conditions for more information.

Mounting
The lights can be mounted on both the front and rear of the bicycle. Follow the instructions provided in the user manual for proper mounting.

Product Usage Instructions

ON/OFF
To turn on the light, hold the button for two seconds. To turn off the light, hold the button again for two seconds.

Mode Cycle
To cycle through different modes, click the button once. Each click will change the mode of the light.

Mode Memory
The light has a mode memory function. It will remember the last mode used and automatically switch to that mode when turned on again.

Thermal Protection
If the operating temperature of the light becomes too high, the light will automatically lower the lumen output to prevent overheating.

Battery Indicator
The lights have LEDs located on the sides that display the current battery status while the light is on. When the light is off, click the button once to momentarily display the battery status.

Charging
The lights can be charged using a USB-C cable. Refer to the user manual for detailed instructions on how to charge the lights.
For more information and support, visit www.lezyne.com/support.php.

READ ENTIRE MANUAL BEFORE OPERATION to ensure proper use and care of your new Lezyne LED light. Traffic laws mandating lighting vary from country to country. Inform yourself about lighting laws and regulations in the country of use. Lezyne LED lights do not conform to the German road traffic regulation StVZO .

Warnings

• DO NOT LOOK DIRECTLY INTO LIGHT BEAM or shine into the eyes of another.
• DO NOT SUBMERGE UNDER WATER. Lezyne LED lights are water-resistant under normal conditions but are not waterproof.
• DO NOT ATTEMPT TO REMOVE ELECTRONICS. Doing so will void the warranty

Lezyne USA, Inc. does not accept any liability for injuries or other damages resulting from the use of this product in any circumstances..

Warranty

In U.S. and U.K., Lezyne LED Lights carry a two (2) year warranty from the original purchase date to the original owner (proof of purchase required). Lezyne Batteries carry a six (6) month warranty from the original purchase date. Lezyne warranties cover any manufacturing defects in materials or workmanship. Issues not covered by warranty include normal wear & tear, improper installation, aiming to access or modify electronics, damage or failure due to accident, misuse, abuse, and/or neglect.
For all warranty issues worldwide, please contact the retailer that sold the product.
For any warranty questions contact: warranty@lezyne.com

Mounting

Operation

1. ON/OFF: hold the button for two (2) sec.
2. Mode cycle : click the button

MODE MEMORY : The light remains in the output setting it is switched OFF in.
THERMAL PROTECTION: If the operating temperature of the light is too high, the light automatically lowers the lumen output.

Run Times and Modes

Battery Indicator

LEDs, located on the sides, display the current battery status while the light is ON. When the light is OFF, click the button once to momentarily display the battery status.

Charging

Before using your Lezyne LED Light for the first time, fully charge the battery.
To charge your light:

1. Switch light OFF

2. Remove USB-C protective cover

3. Connect USB-C cable and light to powered USB-C port
   If the button does not flash when plugged in, the selected USB-C port may not be powered—try another USB-C port. Light will be charged after 4–6 hours or when the side LED illuminates solid green.

4. Remove the light from the charger and reinstall USB-C protective cover—ensure USB-C protective cover is fully installed for water resistance resistance

Lezyne USA, 645 Tank Farm Rd., Unit F, San Luis Obispo, California 93401
For more info go to: www.lezyne.com/support.php

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>