NORTH SPORE Repeat Cycle Timer Instructions
- June 13, 2024
- NORTH SPORE
Table of Contents
Repeat Cycle Timer
Instructions
Repeat Cycte Timer Instructions- Side A
PRODUCT OVERVIEW:
Quality product at an affordable price. The Spartan Series repeat cycle timer
is perfect for £02 cantrol, pumps, fans and other 120 Volt appliances.
Features a 5 second to 30 ‘minute ‘ON” time and 5 second to 60 minute “OFF’
time and a buit in photocel for day or might use. Simpl o operate and easy 1o
use.
Timer is set in 24 Hour Control Mode. Refer 1o side B to set in Day or Night
mode.
TECHNICAL SPECIFICATIONS:
- Voltage: 125 Volt
- Hertz: 60Kz
- Max Operating Amps: 15 Amps Resistive Load
- Operating temperature: 32°F – 122°F (0°-50° )
Includes 1 year repair or replacement warranty. For technical assistance call 888-808-4826 from Mon-Fri 8 AM-5 PM PST. Go to www.titancontrols.net for more information.
OPERATION INSTRUCTIONS:
Step 1
Setting ‘ON” & ‘OFF’ times for repeat cycle timer.
A. Rotate knob to set ‘ON” time. B. Rotate knob to set ‘OFF’ time. Step2
Plug ito outlet and appliance will cycle ‘ON’ then ‘OFF’ using current timer
settings. Continue to other side for Step 3. Repeat Cycte Timer
Instructions- Side B
CHANGING MODES:
Step3
Sty ehour cantrol
A. Adjust both top & bottom knabs 1o mininu settings
B. Plgin, then rutate top & bottom knobs to maximum sstting within 5 seconds.
C. The ‘Output On’ LED activates bas on timer ssttings.
Set to DAY control:
A. Adjust both top & bottom knabs 1o mininu settings
B. Pugin, then rotate top nob o minkum, then bottom knob to minimum settings
ithin 5 seconds.
C. The ‘Output On’ LED activates based on timer sattings.
Set to NIGHT control:
A Adjust both top & bottom knobs to ‘maximum sattings.
B. Pugin, then rotate ottom knob to minimum, then top knob to miimum settings
withi 5 seconds.
C. The ‘Output On’ LED activates based on timer sattings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>