Traceable 5600013 3 Channel Timer User Guide
- June 13, 2024
- TRACEABLE
Table of Contents
5600013 3 Channel Timer
User Guide
3-Channel Timer
Quick-Start Guide
5600013 3 Channel Timer
Traceable® 3-Channel Timer
INITIAL SETUP
-
Remove battery cover and insert batteries.
-
Use the volume slider to adjust buzzer volume.
-
Use the duration slider to adjust alarm duration.
-
Replace battery cover.
-
Press TIMER/CLOCK until time appears on screen.
-
Hold TIMER/CLOCK until there is an audible beep.
-
Use H/M/S buttons to set time; press TIMER/CLOCK when done.
-
Use H/M/S buttons to configure alarm and date.
Note: To activate alarm, press START/STOP ALL button when ALARM is flashing. ALARM will appear on display if alarm is active.
SETTING A TIMER
- Press TIMER/CLOCK until timer is displayed.
- Press and hold START/STOP on the timing channel to be configured.
- Use H/M/S buttons to configure timer.
- Press START/STOP on timing channel to set timer.
Note: To recall memory, simply press START/STOP button after the timer has alarmed.
STARTING A TIMER
To start/stop an individual channel, press the START/STOP button for that
channel.
To start/stop all channels, press the START/STOP ALL button
Note: If a channel has not been configured with a set time, pressing START/
STOP on that channel or START/STOP
ALL will start a count up and TIME UP will flash on that channel.
WARRANTY, SERVICE, OR RECALIBRATION
an antylia scientific company
12554 Old Galveston Rd. Suite B230
Webster, Texas 77598 USA
Ph. 281-482-1714
Fax 281-482-9448
support@traceable.com
traceable.com
Traceable®
Products are ISO 9001:2018 Quality-
Certified by DNV and ISO/IEC 17025:2017
Item No. 56000-13
Model No. 5665
©2022 1065T8_M_92-5665-00 Rev. 0 09022022
accredited as a Calibration Laboratory by A2LA.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>