ClickSmart plus CSPGM2075 Smart GridPro Scenario Switch User Manual

ClickSmart plus CSPGM2075 Smart GridPro Scenario Switch User Manual

Introduction

Any device with the signs of damage and/or missing parts should NOT be installed and should be returned.
Before commencing any electrical work, to prevent the possibility of receiving an electric shock, ensure the mains isolator on the consumer unit is in the ‘OFF’ position and safely isolated in accordance with Best Practice Guide 3.
Install the device away from strong signal sources such as microwaves that may cause signal interruption resulting to abnormal operation of the device.
Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
Do NOT attempt to dissemble, repair of modify the device.

Product Description

The Smart Grid Pro Scenario Switch is a wireless switching solution.
It can work in conjunction with other devices to design and implement smart application scenarios.
From simply turning on lights with a Click Smart+ switching receiver (CSP041/CSP042), to turning on a fan or heater with the Click Smart+ smart sockets (CMA30035/CMA30035).

Preparation For Use

The Smart Grid Pro Scenario Switch requires the Click Smart+ Hub (CSP010).
To use the Smart Grid Pro Scenario Switch you will need to ensure that you have a mobile device running iOS 8 or higher or Android 4.1x or higher.

Preparation For Use

Download the Click Smart+ App on your mobile device from the App Store or Google Play.
Scan Me

You can scan the QR Code above to directly download the app
Sign in or Register following the instructions on the Click Smart+ App.

Ensure that the Click Smart+ Hub (CSP010) has been connected prior to connecting the Smart Grid Pro Scenario Switch.
To connect the Click Smart+ Hub please refer to the installation manual included with the Click Smart+ Hub product.

Installation Instructions

Remove the battery protection tab from the Smart Grid Pro Scenario Switch.

1. Press down on the battery cover and push to the right to remove.

2. Pull the battery protection tab away from the switch module.
   

3. Insert the battery cover back onto the switch module until you hear a click.

Putting the device into pairing mode

To put the Smart Grid Pro Scenario Switch into ‘pairing’ mode, insert the reset pin into the reset hole on the front of the switch module and hold for 5 seconds.

The sensor will be in ‘pairing’ mode when the indicator is blinking.

Pairing the device to the Click Smart+ app

On the Click Smart+ app’s home page, tap the previously connected Click Smart+ Hub icon.
On the Hub page, tap ‘add Sub-device’ and select ‘LED already Blinking’ Alternatively Tap the ‘+’ symbol in the top right corner and navigate to Smart Grid Pro Scenario Switch.

Note: Please rename device in the Click Smart+ Application before creating Automations or ‘Tap to Runs’.

Device Usage

The switch has two retractive buttons (B1 – Top and B2 – Bottom)
Each button offers three control options:

1. Short Press
2. Long Press
3. Double Press
   
   

Each option can be paired with a “Tap To Run” sequence which is setup using the app once paired.

Click Front Plate
Assemble the module(s) onto front plate using the fixing screws at the rear of the plate.
Note: Ensure switch is paired to the required load before assembling to plate.

Note: Do not overtighten the fixing screws

Mounting Yoke
Attach the module(s) to the mounting yoke using the clipping arrangement as shown below.
Note: Ensure switch is paired to the required load before assembling to plate.

If required the module can be removed by hand or a small screwdriver by depressing the clip.

Product Specifications

What’s in the Box?

• Smart Grid Pro Scenario Switch
• Battery (Installed)
• Reset Pin
• Instruction Manual

CUSTOMER SUPPORT

For other compatible products within the range please visit: www.Click- Smart.com
Scolmore House, Mariner, Lichfield Road Ind. Estate,
Tamworth, Staffordshire, B79 7UL
Technical Helpline: +44 (0) 1827 63454
www.scolmore.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>