ANKER A9128 140W Prime 6 In 1 Charging Station User Manual

June 13, 2024
Anker

Live Charged.ANKER A9128 140W Prime 6 In 1 Charging Station
Anker Prime 6-in-1 Charging Station (140W) USER MANUAL

Overview

ANKER A9128 140W Prime 6 In 1 Charging Station -
FigureANKER A9128 140W Prime 6 In 1
Charging Station - Figure 1

Using Your Product

ANKER A9128 140W Prime 6 In 1 Charging Station - Figure
3

LCD Screen Guide

ANKER A9128 140W Prime 6 In 1 Charging Station - Figure
4

To turn off the screen, press and hold the screen button for 2 seconds. To return to the previous interface before turning off the screen, press and hold the button briefly.
ActiveShieldTM 2.0
Note: When the temperature rises abnormally. the device will adjust its power to cool down. The icon also changes color and flashes once every second.

Specifications

Electrical Rating 125V AC, 60Hz, 10A
Total Output 1.000W Max

1 Port:
USB-A 1 / A 2 Output| 5V=2.4A (2.4A Max Per Port)
U58-C 7 I C 2 Output| V= 3A/9V=3A/15V=3A/ 5
20V=5A/284=5A(140W Max Per Port)
2 Ports:
LISB-C 1 / USB-C 2 + USB-A 1 / USB-A 2 Output| 120W Max + 12W Max
USB-C 1 + USB-C 2 Output| 65W Max + 65W Max
USB-A 1 + USB-A 2 Output| 15W Max
3 Ports:
USB-C 1 + USB-C 2 + USS-A 1 / USB-A 2 Output| 65W Max + 60W Max + 12W Max
USB-C 1 / C 2 + USB-A 1 + USB-A 2 Output| 120W Max + 15W Max
4 Ports:
USB-C 1 + USB-C 2 + USB-A 1 + USB-A 2 Output| 65W Max + 60W Max + 15W Max
Size| 6.3 x 3.0 x 0.7 in (162 x 78 x 18 mm1
Cable Length| 5 ft (1.5 m)

  • The built-in USB ports support an input voltage of 100-240V-50/60Hz.
  • It is normal that power fluctuations may occur to protect the electrical safety and performance of the product when the load output is high for long periods of time.

Important Safety Instructions

  • Do not connect this product to an ungrounded outlet.
  • Do not use with extension cords.
  • Do not exceed electrical ratings.
  • Use in dry locations and indoors only.
  • Do not use the product if the plug is broken.
  • The disconnection from line voltage is made by AC plug.
  • Do not connect this product to other power strips.
  • Do not cover this product when in use.
  • If you want to clean the product. only use a dry cloth or brush.
  • Install this product away from heat-emitting appliances such as radiators.
  • Keep children away from this product.
  • Do not place this product near naked flame sources. such as candles.
  • The product is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
  • The terminal equipment should have a fireproof enclosure with a minimum rating of V-1.
  • Caution: The bottom surface of the product may become hot when charging for an extended period. Please refrain from touching the bottom surface for more than 1 second.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received. including interference that may cause undesired operation.
    Warning: Changes or modifications not expressly approved by the par: responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that t which the receiver is connected.
  • Consult the dealer or an experienced radio / TV technician for help.
    The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: 1-800-988-7973

IC Statement

This device complies with Industry Canada license – ICES-003. Operation is subject to the following two conditions: This device may not cause interference, and (2) This device must accept any interference. including interference that may cause undesired operation of the device.

Customer Service

| 24-Month Limited Warranty
---|---
| Lifetime Technical Support
| support@anker.com
| (US/CA) +1 (800) 988 7973

Connected Equipment Warranty

Anker Innovations Limited (“Anker”) offers a limited Connected Equipment Warranty (CEW) for Anker Power Strips and Outlet Extenders as listed below. The product shall be purchased originally from Anker and free of defects in design. assembly. material. or workmanship. Anker reserves the right to update. amend. and/or revise the terms of this CEW. For more details about the CEW, please refer to the official website: https://us.anker.com/pages /connected-equipment-warranty Or scan the OR code below:

ANKER A9128 140W Prime 6 In 1 Charging Station - QR Code
1 https://us.anker.com/pages /connected-equipment-warranty

For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com Or scan the QR code below:

https://rainbowbridge.anker.com/qrscan?key=anker-221202

| @anker_official
@anker_jp
---|---
| @AnkerDeutschland
@AnkerJapan
@Anker
| @AnkerOfficial @Anker_JP

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals