ANKER Prime 67W GaN Wall Charger User Manual
- June 13, 2024
- Anker
Table of Contents
Prime 67W GaN Wall Charger
User Manual Live Charged.
Anker Prime
67W GaN Wall Charger (3 Ports)
USER MANUAL
Prime 67W GaN Wall Charger
Attention
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
Specifications
Input | 100V-240V~50/60Hz 1.8A |
---|---|
Output | Use 1 Port Output |
PPS | Support PPS |
Average active efficiency | 77.28% |
Efficiency at low load (10%) | 52.43% |
No-load power consumption | 0.21W |
Operating Temperature | 0-25℃ / 32-77 ℉ |
Note: To ensure electrical safety and product performance, the output
power may fluctuate based on the ActiveShield™ safety mechanism when the
ambient temperature is between 26-35°C(78.8-95°F) with a high output load.
*ActiveShield™ enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2669 is in
compliance with Directive 2014/35/EU & 2014/30/ EU & 2011/65/EU & 2009/125/EC
& 2019/1782/EU. The full text of the EU declaration of conformity is available
at the following internet address: https://www.anker.com
Hereby, Anker Innovations Limited declares that the producttype A2669 is in
compliance with Electrical Equipment (Safety) Regulations 2016 &
Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of
Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for
Energy-Related Products Regulations 2010. The full text of the GB declaration
of conformity is available at the following internet address:
https://www.anker.com.
Indoor use only
This symbol indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK
matters)
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich,
Germany
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford,
Hertfordshire, WD17 1HP, United Kingdom
Customer Service
24-month limited warranty*
Lifetime technical support
support@anker.com
(UK) +44 (0) 1604 936200
Please note that your rights under applicable law governing the sale of
consumer goods remain unaffected by the warranties given in this Limited
Warranty.
For tutorial videos, FAQs, manuals, and more information, please visit:
https://support.anker.com
Or scan the QR code
below:https://rainbowbridge.anker.com/qrscan?key=anker-221202
| @anker_o cial
@anker_jp
---|---
| @AnkerDeutschland
@AnkerJapan
@Anker
| @AnkerO cial
@Anker_JP
PAP 22
Product Number: A2669
51005003915 V01