KFi PRODUCTS 101240 Winch Mount Receiver User Manual
- June 13, 2024
- KFi PRODUCTS
Table of Contents
KFi PRODUCTS 101240 Winch Mount Receiver
Product Information
The Universal 2 Upper Receiver – Bolt-On is a component designed to fit any standard four-hole winch mount without a fairlead flange. It has a bolt-up pattern of 3 x 4 7/8 inches. The product is compatible with the Winch Mount Receiver – PART # 101240 Hardware Kit: HK-001.
The kit includes the following components:
- 1 Universal 2 Upper Receiver (Bolt-On)
- 4 5/16-18 x 1 Bolts
- 4 5/16 SAE Flat Washers
- 4 5/16-18 Nylock Nuts
Product Usage Instructions
- Place the Universal 2 Upper Receiver on the mount and align the holes.
- Insert the 5/16 x 1 Bolts through the holes in the receiver plate and the mount (refer to Figure 2).
- Put a 5/16 Flat Washer and a 5/16-18 Nylock Nut onto each bolt.
- Tighten the hardware securely.
Note: Please refer to Figure 1 (Exploded View) for a visual representation of the product placement on a Mule Pro FXT (this is just an example).
- Winch Mount Receiver – PART # 101240
- Hardware Kit: HK-001
Kit Components
Qty. Part Description
- 1…………….. REC – Universal 2” Upper (Bolt-On)
- 4…………….. 5/16”-18 x 1” Bolt
- 4…………….. 5/16” SAE Flat Washer
- 4…………….. 5/16”-18 Nylock Nut
INSTALLATION INSTRUCTIONS
- Place Receiver on mount and line up holes.
- Place 5/16” x 1” Bolts through holes in receiver plate and mount (Figure 2).
- Place 5/16” Flat Washer and 5/16”-18 Nylock Nut on the bolt and tighten hardware.
©2015 Copyright Kappers Fabricating, Inc. All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>