KFi Products 100795 Winch Mount Instructions
- June 13, 2024
- KFi PRODUCTS
Table of Contents
KFi Products 100795 Winch Mount
Product Information
| Item # | Qty. | Description |
|---|---|---|
| 1 | 1 | Rear Mount |
| 2 | 1 | Front Mount |
| 3.1 | 2 | HK-046 |
| 3.2 | 2 | 3/8-16 X 1.00 Hex Bolt GR5 |
| 3.3 | 2 | M8-1.25 X 25 Hex Bolt Flange GR8.8 |
| 3.4 | 2 | 5/16-18 X .75 Hex Bolt Flange GR5 Serrated |
| 3.5 | 2 | 3/8 Flat Washer SAE |
| 3.6 | 2 | 5/16 Flat Washer SAE |
| 3.7 | 2 | 5/16 Lock Washer |
| 3.8 | 2 | 3/8 Hex Nut Nylock |
| 100795 | – | Installation Instructions (Part #100795) |
Product Usage Instructions
- Remove the 4 bolts (A) and bumper cover shown in Figure 2.
- Place the Rear Mount (1) between the frame and bumper as shown in Figure 3. Use bolts (3.3), washers (3.5), lock washers (3.6), and nuts (3.8) as shown in Figure 1 & 3. Do not tighten.
- Place the Front Mount (2) in front of the bumper as shown in Figure 4. Use bolts (3.2) to secure the mount.
- Install the Fairlead onto mounts (1 & 2) using bolts (3.1), washers (3.4), and nuts (3.7) as shown in Figure 1.
- Tighten all hardware completely.
- Mount the winch using the manual provided with the winch.
- Reinstall the bumper cover removed in step 1, using bolts (A) as shown in Figure 2.
Note: Make sure all hardware needed to complete this mount is in the package. Thoroughly read through and understand the instructions before installing.
Kit Components
| Item # | Qty. | Description |
|---|---|---|
| 1 | 1 | Rear Mount |
| 2 | 1 | Front Mount |
| 3 | 1 | HK-046 |
| 3.1 | 2 | 3/8”-16 X 1.00 Hex Bolt GR5 |
| 3.2 | 2 | M8-1.25 X 25 Hex Bolt Flange GR8.8 |
| 3.3 | 2 | 5/16″-18 X .75 Hex Bolt Flange GR5 Serrated |
| 3.4 | 2 | 3/8” Flat Washer SAE |
| 3.5 | 2 | 5/16” Flat Washer SAE |
| 3.6 | 2 | 5/16” Lock Washer |
| 3.7 | 2 | 3/8” Hex Nut Nylock |
| 3.8 | 2 | 5/16-18 Hex Nut GR5 |
Note: Make sure all hardware needed to complete this mount is in the package. Thoroughly read through and understand the instructions before installing.
Installation Instructions
- Remove the 4 bolts (A) and bumper cover shown in Figure 2.
- Place Rear Bracket (1) between frame and bumper as shown in Figure 3. Use bolts (3.3), washers (3.5), lock washers (3.6), and nuts (3.8) as shown in Figure 1 & 3. Do Not Tighten.
- Place the front mount (2) in front of the bumper as shown in Figure 4. Use bolts (3.2) to secure the mount.
- Install Fairlead onto mounts (1 & 2) using bolts 3.1, washers (3.4), and nuts (3.7) as shown in Figure 1.
- Tighten all hardware completely.
- Mount the winch using the manual provided with the winch.
- Reinstall bumper cover removed in step 1, using bolts (A) as shown in Figure 2.
©2023 Copyright Kappers Fabricating, Inc. All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>