KFI PRODUCTS SP 570 Winch Mount Instruction Manual
- June 13, 2024
- KFi PRODUCTS
Table of Contents
POLARIS RANGER SP 570
Winch Mount PART #101980
Instruction Manual
SP 570 Winch Mount
Kit Components:
| Item # | Qty. | Description |
|---|---|---|
| 1 | 1 | Winch Mount |
| 2 | 1 | Hardware Kit (HK-031) |
| 3 | 1 | Hardware Kit (HK-391) |
| 3.1 | 4 | 3/8”-16 x 1.00 Hex Flange Bolt |
| 3.2 | 4 | 3/8”-16 Hex Flange Nylock Nut |
| 3.3 | 4 | 3/8”-16 Square Nut (not used) |
INSTALLATION INSTRUCTIONS
Note: Make sure all hardware needed to complete this mount is in the package. Thoroughly read through and understand the instructions before installing.
-
Remove front bumper by removing OEM bolts (A) found on the back side of the front bumper as shown in Figure 1.
-
Assemble winch and contactor to winch mount (1) using hardware supplied with the winch as shown in Figure 2. See Figure 3 for wide, standard, and 2-hole winch mounting patterns.
NOTE: Make sure winch cable is spooling out between the winch drum and winch mount (1) as shown in Figure 2. -
Assemble winch fairlead to front bumper usin hardware supplied with the winch as shown in Figure 4.
-
Assemble winch mount (1) to front bumper supports using bolts (3.1) and nuts (3.2) as shown in Figure 5.
-
Reattach front bumper to the machine using OEM bolts (A) removed in step 1.
WIRING INSTRUCTIONS
-
Run the red positive (+) battery wire from the contactor to the positive (+) post on the pulse bar.
Run the black ground wire (-) from the contactor to the ground (-) post on the pulse bar as shown in Figures 6 & 7. -
In the center console of the ranger, there are prenotched holes for the dash rocker switch to mount as shown in Figure 8 & 9.
NOTE: If the winch only comes with a handlebar mounted rocker switch you and wish to install it in the dash, assemble per Figure 10 using hardware kit HK-031 (3). -
If the Polaris 3-pin wire harness for the pulse bar is not being used, attach the ignition fed (red) wire from the switch to the orange wire (B) as shown in Figure 7.
-
Using the wiring instructions provided in the winch manual, wire accordingly.
©2023 Copyright Kappers Fabricating, Inc.
All rights reserved