ANKER A2669 Prime 67W GaN Wall Charger User Manual

June 13, 2024
Anker

ANKER A2669 Prime 67W GaN Wall Charger

The Anker Prime 67W GaN Wall Charger is a high-quality charger designed to provide fast and efficient charging for your devices. With three ports, including two USB-C ports and one USB-A port, this charger offers versatile charging options for multiple devices simultaneously.

Specifications:

  • Input: 100V-240V~50/60Hz 1.8A
  • USB-C1/C2 Output: 5V 3A/9V 3A/12V 3A/15V 3A/20V 3.35A (67W Max)
  • USB-A Output: 4.5V 5A/5V 4.5A/5V 3A/9V 2A/12V 1.5A/10V 2.25A (22.5W Max)
  • Use 1 Port Output: USB-C1/C2: 65W Max, USB-A: 22.5W Max
  • Use 2 Ports Output: USB-C1+USB-C2: 65W Max, USB-C1+USB-A: 65W Max, USB-C2+USB-A: 65W Max
  • Use 3 Ports Output: 64.5W Max
  • Total Output: 67W Max
  • PPS Support
  • No-load Power Consumption: 0.21W

Product Usage

  1. Plug the charger into a power outlet with the included power cable.
  2. Connect your devices to the charger using the appropriate cables. You can use USB-C1, USB-C2, or USB-A ports depending on your device’s compatibility and charging needs.
  3. If you are using only one port, make sure to connect your device to the corresponding port based on its power requirements.
  4. If you are using multiple ports, you can distribute the power among the ports according to your preference.
  5. Once all devices are connected, the charger will automatically detect and provide the optimal charging speed for each device.
  6. Ensure that all devices are properly connected and charging indicators are active.
  7. When charging is complete, unplug the charger from the power outlet and disconnect your devices.

For more information, including tutorial videos, FAQs, and manuals, please visit the official Anker support website: https://support.anker.com

Attention

  • The product is designed for use with IT equipment only.
  • Naked flame sources, such as candles, must not be placed on the product.
  • The disconnection from line voltage is made by AC plug.
  • In case of broken cords or plugs, the product must be disposed of.
  • If you want to clean the product, only use a dry cloth or brush.
  • The socket-outlet shall be installed near the equipment and shall be easily accessible.
  • The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
  • Fold slowly to avoid finger injury.

Using Your Product

ANKER A2669 Prime 67W GaN Wall Charger-FIG1

For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).

Specifications

  • Input: 100V-240V~50/60Hz 1.8A

  • Output

    • Use 1 Port Output

    • USB-C1/C2:5V 3A/ 9V 3A/12V 3A/ 15V 3A/ 20V 3.35A (67W Max)

    • USB-A: 4.5V 5A/ 5V 4.5A/ 5V 3A/ 9V 2A/ 12V 1.5A/ 10V 2.25A(22.5W Max)

    • Use 2 Ports Output

    • USB-C1+USB-C2: 65W Max

    • USB-C1+USB-A: 65W Max

    • USB-C2+USB-A: 65W Max

    • Use3 Ports Output
      64.5W Max

    • Total Output
      67W Max

  • PPS
    Support PPS / PPS

  • Average active efficiency: 77.28%

  • Efficiency at low load (10%): 52.43%

  • No-load power consumption: 0.21W

  • Operating Temperature: 0-25℃ / 32-77 ℉

Note: To ensure electrical safety and product performance, the output power may fluctuate based on the ActiveShield™ safety mechanism when the ambient temperature is between 26-35°C(78.8-95°F)with a high output load.
*ActiveShield™ enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A2669 is in compliance with Directive 2014/35/EU & 2014/30/ EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU declaration of conformity is available at the following
internet address: https://www.anker.com

Indoor use only

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Customer Service

  • 24-month limited warranty*
  • Lifetime technical support
  • support@anker.com
  • (UK) +44 (0) 1604 936200

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals