ZKTECO FR1500S Flush Mounted Fingerprint Reader Owner’s Manual
- June 13, 2024
- ZKTECO
Table of Contents
ZKTECO FR1500S Flush Mounted Fingerprint Reader
Product Information
| Product Name | FR1500S Flush-Mounted RS-485 Fingerprint Reader |
|---|---|
| Features | Single Gang Waterproof IP65 |
| Power Supply Operating Voltage | 12V DC |
| Stand-by Mode Power Consumption | 0.72W |
| Peak Current of Fingerprint scanning | 140mA |
| Configuration | ZKBioSecurity3.0 |
| Hardware | 1.0 GHz CPU, Z-ID Sensor, Buzzer Prompt, Three-color Indicator |
Light, Compatibility with inBio/inBioPro Controllers and Standalone
Fingerprint Devices
ZKBio Access Standard Features| 125KHz RFID Card
ZKBio Access Optional Features| 125KHz HID Prox Card, 13.56MHz IC Card (S50 /
S70), 13.56MHz
HID Iclass Card
Communication| RS485
Dimensions (mm)| 77.3 x 38.0 x 7.1
Product Usage Instructions
To use the FR1500S Flush-Mounted RS-485 Fingerprint Reader,
please follow the instructions below:
- Ensure that the power supply is connected and the operating voltage is set to 12V DC.
- Make sure the device is in stand-by mode to minimize power consumption.
- When scanning fingerprints, be aware that it may require a peak current of 140mA.
- The device is configured using ZKBioSecurity3.0 software.
- The hardware of the device includes a 1.0 GHz CPU, Z-ID Sensor, Buzzer Prompt, and Three-color Indicator Light.
- The FR1500S is compatible with inBio/inBioPro Controllers and Standalone Fingerprint Devices.
- The standard feature for ZKBio Access is the use of a 125KHz RFID Card.
- Optional features for ZKBio Access include a 125KHz HID Prox Card, 13.56MHz IC Card (S50 / S70), and 13.56MHz HID Iclass Card.
- The communication protocol for the device is RS485.
- The dimensions of the FR1500S Fingerprint Reader are approximately 77.3mm x 38.0mm x 7.1mm.
For further information or support, please contact ZKTECO CO.,LTD. via their website: www.zkteco.com or email: sales@zkteco.com..
Features
- Single gang Standard junction box installation.
- RS-485 Communication Interface.
- Stainless Steel Front casing.
- Supports IP65 rate.
- Flush-Mounted Design for neat installation.
- Z-ID Fingerprint Sensor.
- Fingerprint Protective Cover.
Specifications
- Additional Info
- Working Temperature: -10 °C ~ 45 °C
- Working Humidity: 20 ~ 95%
- Dimensions(LxWxH): 121.3 × 77.3 × 38 mm
- Algorithm: ZKFinger v10.0
- Power Supply
- Operating Voltage 12V DC
- Stand-by Mode Power Consumption:12V*60mA=0.72W
- Peak Current of Fingerprint scanning:140mA
- Hardware
- 1.0 GHz CPU
- Z-ID Sensor
- Buzzer Prompt
- Three-color Indicator Light
- Compatibility
- inBio/inBioPro Controllers
- Standalone Fingerprint Devices
- Standard Features
- 125KHz RFID Card
- Optional Features
- 125KHz HID Prox Card
- 13.56MHz IC Card(S50 / S70)
- 13.56MHz HID Iclass Card
- Communication
- RS485
Configuration
Dimensions (mm)
- ZKTECO CO.,LTD.
- www.zkteco.com
- E-mail: sales@zkteco.com
- Copyright © 2023 ZKTECO CO., LTD. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>