nVent HOFFMAN SFCSS Syspend Sanitary HMI Fixed Coupling Instruction Manual
- June 13, 2024
- nVent HOFFMAN
Table of Contents
Syspend
Sanitary HMI Fixed Coupling
Instruction Manual
SFCSS Syspend Sanitary HMI Fixed Coupling
NOTE: Cutout template must be printed at 1:1 scale. Measure after printing to verify dimensions.
| 
---|---
a. Install tube/sleeve into fitting. Be sure safety screw is fully seated in
fitting cutout.
b. Push sleeve down into fitting until it is tight.
c. Be sure top surface of sleeve is aligned at split, or left side is lightly
lower than right.
d. Place o-rings in position dry.| Lube top surface only of both o-rings (the
surface the nut will contact)
5. Tighten nut slowly and watch for any part movements that may pitch the o-ring.
© 2019 Hoffman Enclosures Inc.
PH 763 422 2211
nVent.com/HOFFMAN
89042837
Documents / Resources
|
nVent HOFFMAN SFCSS Syspend Sanitary HMI Fixed
Coupling
[pdf] Instruction Manual
P-N 89042760, 89042837, SFCSS, SFCSS Syspend Sanitary HMI Fixed Coupling,
Syspend Sanitary HMI Fixed Coupling, Sanitary HMI Fixed Coupling, HMI Fixed
Coupling, Fixed Coupling, Coupling
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>