BERTSCHAT Pro Dual Heating Heated Gloves Instruction Manual
- June 13, 2024
- BERTSCHAT
Table of Contents
BERTSCHAT Pro Dual Heating Heated Gloves
Product Information
Product Name: Heated Gloves Pro – Dual
Heating Available Languages: English
Dual heating technology for both back of the hand and palm
Independent control for each heating side
Adjustable temperature settings
LED indicators for temperature settings
Cautionary feature to prevent damage to gloves
Product Usage Instructions
Before First Use
- Ensure that the gloves are fully charged.
- Familiarize yourself with the buttons on the gloves.
Switching On the Heating
- Press the black silicon buttons on the gloves that display hands.
- The first button controls the heating on the back of the hand, while the second button controls the palm.
- This allows you to heat both sides of the hand independently or at different intensity levels.
Temperature Settings
- Press the silicon buttons to set the desired temperature.
- The buttons will light up in different colors to indicate the active setting:
- Red: Highest temperature
- Orange: Medium temperature
- White: Lowest temperature
- LED does not light up: Heating function switched off
Word of Caution
- Never activate both heated sides at maximum intensity without a hand inside the gloves.
- The dual heating elements generate intense temperatures that may damage the gloves.
Operating Time
- The heating duration depends on ambient temperature and selected heat setting.
- Higher settings deplete batteries faster.
- Consider ordering an additional battery pack for longer usage time.
Switching Off
- Press the ON/OFF buttons until the LEDs no longer light up.
- Alternatively, disconnect the batteries.
- After use, always disconnect the batteries and store them in the intended pockets.
- Store the gloves and batteries in a dry and clean environment at room temperature.
Washing Instructions
- Follow the washing instructions provided separately for cleaning the gloves.
Contact Supplier
- If you have any questions or need clarification, please contact your supplier.
GLOVES DOUBLE HEATING
BEFORE FIRST USE
The batteries are not fully charged and must therefore be charged before first use for 8 hours minimum, regardless of the colour of the indicator LED. To get started insert the charger plugs in the charging ports of the batteries. Fully charging the batteries activates them, thus allowing the full capacity to be accessed. The LED on the charger lights up in red during charging and turns green once the battery is fully charged. Finally, remove the batteries from the charger, place them in the appropriate pockets in the gloves and connect them to the plugs.
SWITCHING ON THE HEATING
The heating is switched on by pressing the black silicon buttons on which the
hands are displayed. The first button controls the heating on the back on the
hand while the second one controls the palm. This allows both sides of the
hand to be heated independently or at various levels of intensity.
TEMPERATURE SETTINGS
The temperature can be set by pressing the silicon buttons. When in use the
buttons light up in one of the below colours indicating which setting is
active:
WORD OF CAUTION:
Never activate both heated sides at maximum intensity without a hand inside
the gloves. The dual heating elements generate such an intense temperature
that the gloves may get damaged!
OPERATING TIME
- The heating duration of the gloves depends on several factors: primarily the ambient temperature and secondly the heat setting selected: a high setting will obviously deplete the batteries faster than any of the lower settings. It should also be noted that the batteries only reach their full charging capacity after a few charging cycles.
- Consider ordering an additional battery pack for longer use time.
SWITCHING OFF
The heating function is switched off by pressing the ON/OFF buttons until the
LEDs no longer light up or alternatively by simply disconnecting the
batteries.
After use of the gloves, always disconnect the batteries and keep them stored
in their intended pockets. Store the gloves and the batteries in a dry and
clean environment at room temperature.
ADDITIONAL INSTRUCTIONS
- Always switch off the gloves after use.
- Disconnect the batteries when not in use.
- Store gloves, battery, and adapter in a cool and dry location.
- The batteries should only be charged with the original charger.
- Always remove the battery from the gloves before charging them.
- Never pull too hard on the gloves as the heating elements could get damaged.
- Keep the shirt away from sharp or pointed objects.
WASHING INSTRUCTIONS
- The gloves cannot be washed. Should they get dirty we advise to clean them with a wet cloth.
- Only allow the gloves to dry naturally and do not place them on the heating or any other heat source.
- If the gloves are damp, allow them to dry fully before charging.
- Do not dry clean the gloves.
- Do not iron the gloves.
TROUBLESHOOTING
If you notice that the gloves do not get warm, you can do the following test:
- Charge both batteries at the same time and interchange batteries. This determines whether the battery or the glove is no longer functioning properly.
- Does the LED on the charging cable not light up? The plug or charging cable is defective and does not receive any power.
- Insert both connectors in the gloves in the ports of the batteries. Now place the batteries in the pockets inside the gloves and then close the zip.
- The heating is switched on when pressing the black silicon ON/OFF button on the top of the gloves. The LED on the silicon button lights up to confirm that the heating function is switched on.
- When the LED is lit up the gloves are heating: you should be able to feel the generated heat within 1 minute at the fingers and at the top of the gloves.
WARNINGS
- The gloves are not suitable for use by minors.
- Do not make any changes to the gloves and/or battery.
- In case of damage to battery or charger, stop using the product.
- Leave the protective plastic around the battery.
- If the battery swells up, immediately stop using it and contact the supplier.
- Do not drill through the battery packs or make holes in the battery in any other way.
- Make sure the heating elements do not overlap while active and not being worn as this could lead to a situation where the gloves overheat.
- This product is only intended to be used by people and should not be used on animals.
- The gloves can become very warm. If you have a reduced sensitivity to heat or cold, we recommend consulting a doctor first.
- In case of a higher ambient temperature, the sensation of heat will be stronger. In that case, set the gloves to a lower position that does feel comfortable.
- In case of incorrect use of the battery, there is a possible explosion hazard.
- Avoid direct skin contact with the heating elements as this could lead to skin burns. If you notice a hole in the fabric or a visible heating wire, stop using the gloves and contact your supplier immediately.
IMPORTANT
- Please carefully read the user manual before use.
- This product is not suitable for children
- This product is not suitable for persons with reduced physical, sensory or mental capabilities or persons who are supervision and/or do not stand hazards. All above-mentioned persons should not be allowed to use this product.
- Children are never allowed to play with this product.
- Cleaning and care should not be performed by children who are not supervised.
- The heated products and the battery packs should be regularly checked for signs of wear or damage. If such signs are visible, the product has been used incorrectly, or if the product does not function, we urge the customer to stop using it and to send it back.
- Elderly people or persons with reduced sensitivity of the skin are advised to not use the product.
- The product may not be used for warming animals.
- If you have difficulty sensing heat or cold (disabled persons, etc.), please consult your doctor before using the product.
- Regularly check your body for any discolourations of the skin. Heating at too high intensity for long periods of time can cause burns.
- The heated products may only be used in combination with the original batteries.
- lways use the original supplied charger for charging. It is only intended for indoor use and should not be exposed to humidity.
- Never try to open or repair a battery yourself.
- In case of questions or any failures, always immediately contact the supplier.
- Do not make any changes to the product and do not use it for any other purposes.
- Repairs to the battery packs and other components should only be performed by the manufacturer.
- Hand in used battery packs at a collection point for electronic waste.
- Explosion hazard: do not store battery packs near a heat source and do not throw them in open fire.
- Never drill through the battery packs. Explosion hazard.
- The product is not intended for use in hospitals.
- The technology used in the heated products is compliant with all relevant legislation and regulations. Whether the product can be used in the vicinity of other sensitive electronic products (such as pacemakers, etc.) must be confirmed by the manufacturers of these electronic products.
- Make sure that no other objects are placed on top of the product during storage, as it could bend the heating filaments.
- If an environment is entered that has a considerably higher temperature, the heating must be switched off to prevent overheating of the body.
- Never use heated products in combination with other heated products, too much heat can lead to overheating.
DISPOSING OF THE BATTERIES
As we also supply batteries with our product, we are obliged according to
legislation that applies to batteries to point out the following to you:
Batteries may not be disposed of as household waste. The consumer is legally
obliged to return batteries separately after use. Old batteries could contain
harmful substances that could damage your health or the environment if not
properly stored and disposed of. However, batteries also contain important raw
materials such as iron, zinc, manga-nese, or nickel and can be reused. After
use, you can return the batteries to us or hand them in for free at a location
near you (e.g., at a shop or a municipal collection point). The crossed waste
container symbol indicates that batteries should never be thrown out with your
household waste.
If you have any questions or if anything is unclear, please contact your
supplier.
WWW.BERTSCHAT.EU