Tribit BTH95 True Wireless Earbuds User Manual

Tribit BTH95 True Wireless Earbuds

Product Information

The MoveBuds H1 is a model of True Wireless Earbuds manufactured by Tribit. It is equipped with Bluetooth technology and can be customized using the Tribit App. The earbuds come with a charging case and multiple pairs of ear tips for a comfortable fit. The product has indicator lights to display various functions and features a reset option. The MoveBuds H1 has a battery life that has been tested and verified by ThousandShores Group’s Laboratory.

Product Usage Instructions

Downloading and Installing the Tribit App:

To customize the EQ, upgrade firmware, or restore factory settings of your MoveBuds H1, you need to download and install the Tribit App from Google Play or Apple Store on your device.

Power ON / Power OFF:

To turn on the MoveBuds H1, press and hold the button on the charging case until the white indicator flashes for one second. To turn off the earbuds, repeat the same action.

Bluetooth Connection Instructions:

To connect the MoveBuds H1 to your device via Bluetooth, follow these steps:

1. Make sure the earbuds are powered on.
2. Go to the Bluetooth settings on your device.
3. Select “MoveBuds H1” from the available devices list.

The white indicator on the earbuds will flash slowly while in pairing mode. Once connected successfully, the white indicator will turn off. If you need to re-connect, the white indicator will breathe slowly.

Wearing Your MoveBuds H1:

When wearing the MoveBuds H1, ensure you place the correct earbud in your ear. The left earbud should be placed on the right side of the charging case, while the right earbud should be placed on the left side of the case.

Replace the Ear Tips:

The MoveBuds H1 comes with five pairs of different-sized ear tips. Choose the ear tip that provides the best fit and comfort for your ears.

MoveBuds H1 Indicator Light Instruction:

The white indicator light on the MoveBuds H1 has different indications:

• Power ON/OFF: The white indicator flashes for one second.
• Bluetooth Pairing: The white indicator flashes slowly.
• Connection Successful: The white indicator turns off.
• Re-connecting: The white indicator breathes slowly.
• Low Battery: The white indicator flashes rapidly.

Charging Instructions:

To charge the MoveBuds H1, place them back into the charging case and close the cover. Both the left and right light indicators on the case should be on to indicate successful charging. It takes approximately 90 minutes for the earbuds to fully charge. The charging case itself can be charged by connecting it to a power source. The case’s indicators will breathe during charging and produce a solid glow. It takes around 120 minutes for the charging case to fully charge.

Reset:

If you need to reset the MoveBuds H1, follow these steps:

1. Place the earbuds back into the charging case.
2. Hold down the button on the case for ten seconds.
3. The charging case’s lights will flash twice to indicate a successful reset.

After resetting, make sure to delete the pairing record on your previously connected device and search for the earbuds again to establish a new connection.

Safety Tips:

For safety and warranty purposes:

1. Do not dismantle or modify the MoveBuds H1 as it may result in malfunction, which will not be covered by the warranty.
2. Be cautious of the sharp edges around the opening and closing of the charging case.

Please refer to the official website Tribit.com for any adjustments, revisions, or additional stipulations to this user manual.
Note: The FCC Statement and IC Caution sections are not relevant for general product usage instructions and have been omitted.
Download and install the Tribit App from Google Play or Apple Store on your device. Use the app to customize the EQ, upgrade the firmware, or restore the factory setting of your Tribit products, including the MoveBuds H1.

Package Contents

Power ON / Power OFF

Bluetooth Connection Instructions

Setting up your MoveBuds H1 the first time
Turn on the MoveBuds H1, activate the Bluetooth function on your desired device, and search for other Bluetooth-enabled devices. Find the device name “Tribit MoveBuds H1” to initiate the connection.
Future usage with the MoveBuds H1
Once paired, the MoveBuds H1 will automatically connect to the last connected device when turned on.
Connecting the MoveBuds H1 with other devices

• Method 1: Disconnect the currently connected Bluetooth device, and the MoveBuds H1 will automatically return to Bluetooth pairing mode.
• Method 2: Place the MoveBuds H1 back into the charging case. Hold down the button on the charging case for five seconds until its indicators flash three times. The MoveBuds H1 will be ready to pair with a new device when removed from the case.

Wearing Your MoveBuds H1

The left earbud is placed on the right side of the charging case, while the right earbud is placed on its left side. Ensure you are putting the correct earbud into your ear before attempting to wear it.

Replace the Ear Tips
Five pairs of different-sized ear tips are provided to ensure you have the best choice for your ears.

Button Functionality

Left Earbud

• Single-click: Play/pause the music / Answer a call.
• Double-click: Previous track / End a call.
• Click three times: Activate the voice assistant in a non-conversation state.
• Hold down: Decrease the volume / Reject an incoming call.
• Hold down (six seconds): While off, this will turn on the left earbud.
• Hold down (ten seconds): Turn off both earbuds.

Right Earbud

• Single-click: Play/pause the music / Answer a call.
• Double-click: Next track / End a call.
• Click 3 times: Ambient mode.
• Hold down: Increase the volume / Reject an incoming call.
• Hold down (six seconds): While off, this will turn on the right earbud.
• Hold down (ten seconds): Turn off both earbuds.

MoveBuds H1 Indicator Light Instruction

• Power ON/OFF: The white indicator will flash for one second before turning on/off.
• Bluetooth Pairing: The white indicator will flash slowly while in pairing mode.
• Connection Successful: The white indicator will turn off.
• Re-connecting: The white indicator breathes slowly.
• Low Battery: The white indicator flashes rapidly.

Charging Instruction

Charging the MoveBuds H1
Place the MoveBuds H1 back into the charging case and close the cover to start charging. If both the case’s left and right light indicators are on, your MoveBuds H1 are successfully charging. It takes about 90 minutes for the MoveBuds H1 to fully charge.
Charging the Charging Case
The charging cases indicators will breathe during charging, producing a solid glow. The MoveBuds H1 charging case takes 120 minutes to charge fully.

Reset
To reset the MoveBuds H1, place the MoveBuds H1 back into the charging case and hold down the button on the case for ten seconds. The charging case’s lights will flash twice to indicate a successful reset.
Note: After resetting your MoveBuds H1, you must delete the pairing record on your previously connected device and search for earbuds again to reestablish a connection.

Safety Tips

1. Do not dismantle or modify the MoveBuds H1 for any reason. The warranty will not cover any resulting malfunction due to modifications.
2. The opening and closing edge of the charging case is much sharper than other positions. Please be careful when you open / close its cover to avoid scratches.
3. Do not expose the MoveBuds H1 to temperatures above 45°C or below -20°C as this may cause damage to your device.
4. The MoveBuds H1 contains a built-in lithium battery. Do not disassemble, hit, squeeze or throw MoveBuds H1 into a fire as this may cause an explosion.
5. The MoveBuds H1 contains small components. Please keep them away from children to avoid accidental swallowing or other injuries.
6. It is recommended not to use the MoveBuds H1 when driving as it is illegal in some regions. Please check and abide by the local laws and regulations on the use of headphones. Please stop listening using the MoveBuds H1 if you are distracted by audio devices when driving or engaging in activities that require complete concentration.
7. The MoveBuds H1 and the charging case contain magnets. The magnetic fields generated by these magnets may interfere with pacemakers, defibrillators, or other medical equipment. Please keep a safe distance between your medical equipment and the product.
8. The antibacterial agents coating the earbuds have an inhibitory effect on bacteria. However, the earbuds may still cause ear infections if not properly cleaned. Please use a lint-free soft cloth to regularly clean the MoveBuds H1.

Cautions

1. The MoveBuds H1 may sound lower than the actual volume in a noisy environment.
2. Long-term high-volume listening may cause permanent damage to your hearing.
3. Please charge the MoveBuds H1 with the provided charging cable and power adapter/computer. Only use an adapter that complies with your country/region’s laws and international and regional safety standards.
4. Using the MoveBuds H1 in dry seasons or regions may easily cause static electricity accumulation. You may feel a small amount of static electricity discharge from the earbuds. Please avoid using it in dry environments to reduce the risk of electrostatic discharge. As an extra safety measure, before using the MoveBuds H1, users may touch a grounded item or unpainted metal object to discharge any stored-up static electricity.
5. The waterproofness of the earbuds is tested in the laboratory, which is different from the actual usage conditions. It’s not recommended to immerse the earbuds in water for a long time or wear them for swimming, bathing, or other water sports that may lead to damage to the earbuds, or the warranty will be invalid.

Working Frequency & Transmitting Power

• Working Frequency: 2402MHz ~ 2480MHz
• Transmitting Power: -6 ~ 4dBm

Battery Life and Charging Data Declaration
The MoveBuds H1 battery life, charging time, and charging case come from the ThousandShores Group’s Laboratory. ThousandShores Group reserves the right to adjust, revise, or add stipulations to this user’s manual. Visit our website Tribit.com.

FCC

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

IC Caution

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Qualcomm aptX

Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries. Hereby, [Thousandshores Deutschland GmbH] declares that the radio equipment type [True Wireless Earbuds BTH95] is in compliance with Directive 2014/53/EU. The full text of the EU declaration conformity is available at the following internet address: http://files.tribit.com/bth95-eu-doc.pdf.
Hiermit erklärt [Thousandshores Deutschland GmbH], dass der Funkanlagentyp [True Wireless Earbuds BTH95] der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: http://files.tribit.com/bth95-de-doc.pdf.
Learn more about the UK Declaration of Conformity, Please click the below link to download. http://files.tribit.com/bth95-uk-doc.pdf.

References

• Tribit-Speakers,Earbuds | Treat Yourself with Better Beats

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>