himbol MEMORY Ⅰ Pro Video Recording Monitor Instruction Manual

MEMORY Ⅰ Pro Video Recording Monitor
Instruction Manual
Shenzhen ZO Video Technology Co., Ltd.

Packing list

• Monitor*1
• SD Card*1
• Hot Shoe Mount*1
• SDI Cable*1
• HDMI Cable*1
• Tempered Screen Protector*1
• User Manual*1

Buttons and Ports

1. Power Button
2. Function Key
3. HDMI Interfaces
4. 3.5mm w Headphone Jack
5. DC IN
6. SD Card Slot
7. 1/4″-20 Thread Hole
8. Debug Port
9. NP-F Battery Plate
10. ID SDI Interfaces

Monitors Assist Icons

User Interface

User Interface

Operation Guide

3.1.Boot Method
Short press the power on/off button to turn on the monitor, long press 3 seconds to turn it off.
3.2.HDMI-SDI Interface Description
SDI interface is located on the back of the host, HDMI interface is located on the side of the host, with a dedicated HDMI/SDI cable for close-up real-time monitoring. 3.3.RGB Gain and Offset Control Functions

3.4.Recording Playback
a. Custom File Name

1.  Trigger/TimeCode camera synchronization recording function
2. This position represents the camera position, click up and down to adjust
3. This position represents the shooting site, click up and down to adjust
4. This position represents the number of cameras, it is not adjustable and the digital number increases with the number of shootings

3.5.Format SD Card

3.6.Shortcut Key Preset
There are two shortcut keys, F1 and F2, on the top of the host, and you can choose function presets. 3.7.High Precision Waveform

3.8.Matte

3.9. 3D-LUT Input Method

1. Place the LUT file in the LUT folder on the SD card and insert the SD card into the monitor
2. Click the Color Menu-3D-LUT, turn on **** , and then selecting Custom, click the Import button and wait for the system to retrieve the LUT file in the SD card that needs to be loaded
3. Click on the LUT file that needs to be loaded, then click Import and wait for the file to be imported into the system
4. Click the LUT file, enter the file selection, select the desired LUT, and click to confirm that the LUT is loaded successfully

Note : LUT file name only support English, do not allow any other languages , special characters, spaces, otherwise it will fail to be imported !

3.10 3D-LUT Output Method

1.  Click the color management-3D-LUT icon, after opening select the corresponding SDI-LUT output and HDMI-LUT output functions, click the
2. The LUT for HDMI/SDI output is the same as the LUT that is turned on.

Notes

1. Exceptions in Connection
   Zoom, Anamorphic, Waveform, these three functions can only be opened one at a time. Such as when the Anamorphic function is open, has opened the Zoom or Waveform will be forced to close

2. SD Card Description：SD Card Identification and Use Problems
   2.1 The SD card of this product does not support hot-swapping, if the SD card is inserted and removed during use, causing abnormalities such as the card cannot be recognized and the screen interface cannot be operated, please restart the device.
   2.2 The SD card format used in this monitor is FAT32 and it is different from the card format used in the camera,so can not be mixed.
   2.3 The newly purchased SD card has to formatting by monitor’s “SD Card Format” function before normal use.
   2.4 Recommended card capacity is 32G-128G, MAC computers do not recognise SD cards over 32G in FAT32 format.

3. Record and Playback：
   The Abnormal Phenomenon of Using Recording and Playback Synchronous recording (Trigger/TimeCode)
   3.1 The camera needs to support HDMI Trigger/TimeCode
   3.2 Trigger/TimeCode function is turned on
   3.3 Some of the cameras have been having TimeCode output, when TimeCode mode ON, will trigger automatic recording

Technical Parameters

Headphone out, SD card
Unit Size| 147.888.826.5mm
Contrast Ratio| 1200:1
Power Supply Method| NP-F / DC IN
Input Voltage| DC7-16V
Weight| 305g
Video Recording Format| MP4(SD card format FAT32)
LUT Format| cube file (171717 and 333333) 0
Firmware Updates| SD card updates
Audio Frequency| 48kHz
HDMI Input Signal Formats| 40962160P25/24/23.98
38402160P30/23.98/25/24/23.98
19201080p60/59.94/50/30/29.97/25/24/23.98
19201080i60/59.94/50      1280720p60/59.94/50
SDI Input Signal Formats| 19201080p60/59.94/50/30/29.97/25/24/23.98
19201080PSF30/29.97/25/24/23.98
19201080i60/59.94/50
1280720p60/59.94/50
HDMI Output Signal Formats| 19201080p60/50/30/25/24
19201080i60/59.94/50
19201360/59.94/50
SDI Output Signal Formats| 1080p60/50/30/25/24/23.98
1080i60/50 720p60/50
HDMI&SDI-Lut Output| support
  Please: Recording file     It is under “Video” folder of root directory in SD card.
note: The LUT file to     It is under “Lut” folder of root directory in SD card, and the LUT files be imported should not exceed 50.

Tel+86 0755-21004986
uPL:www.zeroone-video.com
Address:2C, 2nd Floor, Building 6, Longbi Industrial Park
No.27 Dafa Road, Bantian Street, Longgang District, Shenzhen
Shenzhen ZO Video Technology Co., Ltd.

Documents / Resources

| himbol MEMORY Ⅰ Pro Video Recording Monitor [pdf] Instruction Manual
MEMORY Pro Video Recording Monitor, MEMORY Pro, Video Recording Monitor, Recording Monitor, Monitor
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>