himbol ZO600M Wireless Monitor User Manual

June 6, 2024
himbol

Wireless Monitor
link series
Item Model: ZO600M

himbol ZO600M Wireless Monitor

Instruction Manual
Shenzhen ZO Video Technology Co., Ltd.

Monitor Interfaces & Buttons

himbol ZO600M Wireless Monitor - Buttons

1. Function Key 2. Power Button 3. HDMI IN 4. HDMI Output
5. 3.5mm Headphone Jack 6. DC-IN 7. TF Card Slot 8. Debug Port
9. DC Output 10. NP-F Battery Slot

Monitors Assist Icons

|
---|---
|
|
|
| himbol ZO600M Wireless Monitor - Icons1
| himbol ZO600M Wireless Monitor - Icons3
|
| |

User Interface

himbol ZO600M Wireless Monitor - Function

himbol ZO600M Wireless Monitor - Monitor

himbol ZO600M Wireless Monitor - Monitor2

himbol ZO600M Wireless Monitor - Monitor3

Operation Guide

  1. Short press the power button to power on, long press for 3 seconds to power off.

  2. ZO600M Monitor can be switched between TX and RX mode.
    himbol ZO600M Wireless Monitor - TX and RX mode
    Scenario I: ZO600M, connected between the TX and RX.
    himbol ZO600M Wireless Monitor - connected between the TX and
RX
    Scenario II: ZO600M ( TX ) is connected to the other RX devices of Symbol.

    Scenario III: The other TX devices of Shimbol are connected to ZO600M ( RX ).
    himbol ZO600M Wireless Monitor - Symbol is connected to ZO600M RX

  3. ZO600M recording & playback functions.
    himbol ZO600M Wireless Monitor - recording & playback
functions1. Here is for camera position, click up and down for adjustment.
    2. Here is for the shooting site, click up and down for adjustment.
    3. Here is for video serial number, it is not adjustable and the digital number increases with the number of shootings.
    4. This device is a non-handheld device, and the distance between the device and people is greater than 20cm during work.

Technical Parameters

Model No.: Z0600M
Interface: DC In, DC Out, HDMI input, HDMI Output, 3.5mm Headphone-out, TF

card slot, Type C,
Power Supply Method| NP-F / DC
Power Supply Voltage Input Range| 7V-17V
DC Output Max Power| 7.4V / 0.8A
Screen Resolution| 19201080
Brightness| 1000Cd/M2
Contrast Ratio| 1200:1
Display Screen| 5.5″TP
Video-Input Format| 1920
1080p60/59.94/50/30/29.97/25/24/23.98
19201080i60/59.94/50   1280720p60/59.94/50
Video Recording Format| MP4( a single file can’t exceed 4G)0
LUT Format| cube (171717 / 33.3333) 0
Teleprompter File Format| txt ®
Firmware Updates| TF card updates
Audio Frequency| 48kHz
Product weight| 300g
Dimensions| 151
103*29.5mm
Transmission Frequency Band| 5150-5250GHz,5745-5825GHz
Transmission Power| 17dBm
Latency| 80ms®
Receiving Sensitivity| -80dBm
Transmit Range| 500FT

Please note:

Recording file
The LUT file to be imported
Teleprompter file
Latency| It is under the “Video” folder of the root directory in the TF card.
It is under the “Lut” folder of the root directory in the TF card, and the LUT files should not exceed 50.
It is under the ” Text” folder of the root directory in the TF card.
The transmission delay is related to the current electromagnetic vironment.
---|---

himbol ZO600M Wireless Monitor - Fig

Download the “symbol” APP on Apple App Store.

FCC 15.105

FCC STATEMENT

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
    (1) This device may not cause harmful interference, and
    (2) This device must accept any interference received, including interference that may cause undesired operation.

  2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
    authority to operate the equipment.
    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
    These limits are designed to provide reasonable protection against harmful interference in a residential installation.
    This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
    However, there is no guarantee that interference will not occur in a particular installation.
    If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
    the user is encouraged to try to correct the interference by one or more of the following measures:
    —Reorient or relocate the receiving antenna.
    —Increase the separation between the equipment and receiver.
    —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    —Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,
Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation

W52 Band: 5GHz product for indoor use only
Tel+86 0755-21004986
URL:www.zeroone-video.com
It is under the “Video” folder of the root directory in the TF card.
Address: 2C, 2nd Floor, Building 6, Long Industrial Park
No.27 Dafa Road, Bantian Street, Longgang District, Shenzhen
Shenzhen ZO Video Technology Co., Ltd.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals