carbatec DBGULP-ARM Universal Dust Hood Arm Instructions

June 13, 2024
carbatec

DUST HOOD SUPPORT ARM
DBGULP-ARM
INSTRUCTIONS

carbatec DBGULP-ARM Universal Dust Hood Arm Dust hood, hose and clamp sold separately

WHAT’S IN THE BOX

A. Swing/support bracket
B. Hood retaining clamp
C. Upright support lever
D. Upright support bar
E. Hood support bar

carbatec DBGULP-ARM Universal Dust Hood Arm - Fig1

  1. Thread the hood support clamp through the slots in the hood support bar bracket. Fig. 1carbatec DBGULP-ARM Universal Dust Hood Arm - Fig2
  2. Insert the upright support bar through the hood support bar and tighten with the lever lock. Fig. 2carbatec DBGULP-ARM Universal Dust Hood Arm - Fig 2
  3. Insert the upright support bar into the long slot of the swing/support bracket. Ensure the notched end of the upright supports engaged into the swing/support bracket. Fig.3carbatec DBGULP-ARM Universal Dust Hood Arm - Fig 3
  4. Attach the swing support bracket to the lathe bed by removing the heavy round key positioned under the lathe bed.
  5. Attach the hood with the hood retaining clamp. Fig.4carbatec DBGULP-ARM Universal Dust Hood Arm - Fig 4
  6. Attach the hose to the dust hood with a standard hose clamp. (Hood, hose and clamp not included.)

Carbatec Pty Ltd
E info@carbatec.com.au
AU 1800 658 111
NZ 0800 444 329
128 Ingleston Road,
Wakerley, Queensland Australia 4154
CARBATEC.COM.AU OR TECHNICAL SUPPORT CALL 1800 658 111

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals