Wicked Audio Nightshade Wireless Headphone WI-BT550 User Manual
- June 13, 2024
- WICKED AUDIO
Table of Contents
Wicked Audio Nightshade Wireless Headphone WI-BT550
USER MANUAL
FIRST TIME USE
1| Make sure that the headset is charged, your phone turned on, with the
Bluetooth feature enabled.
---|---
2| Turn on the headset and the LED will flash red and blue.
3| Your mobile phone should detect “Wicked Headphone”.
4| Select “Wicked Headphone” to pair and once succesfully paired, the LED will
slowly flash blue.
FUNCTIONS
LINE IN OPTION
When you’d like to use the headset as normal wired headphones plug in the aux cord into the Line Inport and the Bluetooth feature will shutoff. (Note: The answer answer call function is no longer available as long as the Line In port is in use}.
SPECS
BWETOOTH VERSION : V 4.0 and backwards compatible V3.0, V2.l, and Vl.l
CHARGE TIME : 1.5 – 2 hours
BATTERY LIFE : Up to 8 hours
STANDBY TIME : Up to 240 hours
BWETOOTH RANGE : 32 feet/ ID meters
DRIVER/BOBINA : 40 mm Neodymium
SENSITIVITY /SENSIBILIOAO : 102 DB
FREQUENCY/ FRECUENCIA : 20-20,000 Hz
IMPEOANCE/IMPEOANCIA: 32 Ohms
PHONE MIC/MICROFONO INTEGRADO
PRECAUTIONS
LISTENING TO AUDIO AT EXCESSIVE VOWMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.
Over exposure to excessive sound levels can damage your ears resulting in permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration {OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs.
SAFE USE & HAZARD WARNINGS
90 dB SPL at 8 hours| 95 dB SPL at 4 hours| 100 dB SPL at 2 hours| 105 dB SPL
at 1 hours
---|---|---|---
110 dB SPL at 30 min| 115 dB SPL at 15 min| 120 dB SPL: Avoid as damage may
occur
IC: 20S26-BTSSX
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Model #: WI-BTSSO
FCC ID:2AFM7WI-BT5SO
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (l)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Limitation of Llablllty Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
In no event, under any cause of action of theory of liability, shall Wicked Audio Inc., its distributors or suppliers be liable to you or any third party for indirect, incidental, consequential, special, exemplary or punitive damages, of any and all nature whatsoever, arising out of use of or inability to use a product. This includes without limitation, property damage, loss of value of the product or any third party products that are used in or with the Wicked Audio products, even if the Wicked Audio product has been advised of the possibility of such damages that one may encounter. Without limiting the foregoing, you understand and agree that Wicked Audio has no liability for any damages or destruction to the consumer electronics devices or other personal property that are contained in inside or outside the Wicked Audio products. This includes without limitation, laptops, cellular phones, or other hand-held devices, or any loss of data contained on the foreign device. Notwithstanding any damages that you might incur for general damages in contract, tort (including negligence) or otherwise), the entire aggregate liability of Wicked Audio and any of its distributors and/or suppliers shall be limited to the amount actually paid by you for the Wicked Audio product giving rise to liability. Some states and/or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. The limitations of liability set forth above shall apply to the maximum extent permitted under applicable law.
LIMITED ONE YEAR WARRANTY
Keep your receipt to obtain warranty service. Go to
www.wickedaudio.com for more details.
DOWNLOAD
Wicked Audio Nightshade Wireless Headphone WI-BT550 User Manual – [Download PDF]