HTS iLock05 Aluminum Fingerprint Lock User Manual
- June 13, 2024
- HTS
Table of Contents
HTS iLock05 Aluminum Fingerprint Lock
lock operation
Download the QR code
Standalone version operation manual
Four independent unlocking methods
- Password: press the key of*, the screen will be lighted and powered. Then put in the password and press . When you hear the music, the door will be opened. The password capacity is 100 groups.
- Fingerprint: open the slide cover, and put your finger on the fingerprint reader. When you hear the music, the door will be opened. The fingerprint capacity is 100 pieces.
- Card: keep the opening card close to the card reader, when you hear the music, the door will open. The card capacity is 100 pieces.
- Mechanical keys.
Operation Instructions
- Initialization: Press the reset button on PCB for 5 times constantly, lock would turn into default status: Master password: 123456;
- Changing the administrator password: the default administrator password is 123456. Press”* + administrator password+ ” to enter the programming mode. Next, press 8 + and put in a new administrator password ending with pressing . Then put in the administrator password second time and end with pressing . The setting will be finished when you hear a long sound. This administrator password can also open the lock.
- Adding a guest password: Press”* + administrator password ” to enter the programming mode. Next, press 7 + and put in a 2-digit user defined password number (from 01 to 99, should be registered in the form). Then put in a guest password ending up with pressing the J> and repeat this again. The setting will be finished when you hear a long sound.
- Adding a guest fingerprint: Press “* + + administrator password + ” to enter the programming mode. Next, press 6 + and put in a 2-digit user defined number for the guest fingerprint (from 01 to 99, should be registered in the form). Then put your finger on the fingerprint scanner till you hear a long sound. The setting is complete.
- Deleting all of the guest fingerprints and passwords: Press “* + administrator password + ” to enter the programming mode. Next, press 1 + and repeat it again. When the indicator light off, all of the guest fingerprints and passwords are deleted without changing the administrator password.
- Deleting a guest fingerprint: Press *+ + administrator password + ” to enter the programming mode. Next, press 4 + and put in the 2-digit fingerprint number you want to delete and end up with pressing . Repeat the 2-digit number + and the fingerprint is deleted.
- Deleting a guest password: Press * + + administrator password + ” to enter the programming mode. Next, press 5 + and put in the 2-digit password number you want to delete and end up with pressing . Repeat the 2-digit number + LOCK and the password is deleted
- Setting keep-open state: Opening the lock by fingerprint or password, do not press the handle, press 3 + 7 + , you hear the voice prompt of “the door is in the keep-open state” . The setting is finished. Opening the door by fingerprint or password can cancel the keep-open state.
- Adding a card: Press “* + + administrator password + ” to enter the programming mode. Next, press 9 + and hold the card to the card reader. (Adding cards continuously is available)
- Deleting a card: Press “* + + administrator password + ” to enter the programming mode. Next, press 3 + , and put in the number of the card + .
- Volume adjustment: Press “* + + administrator password + to enter the programming mode. Then press 2+ to adjust the volume. I is to decrease to volume while 3 to increase.
- Chinese & English shifting: Press “* + + administrator password + to enter the programming mode. Next, pressing 0 + can shift language between Chinese and English.
Opening holes on the door
This holes can be used in wooden doors and plastic doors and metal doors with
thickness over 30MM.(as shown pictures-02) Open holes as below. Make sure they
keep accordance with the lock and parallel with the door case when locking.(as
shown pictures-03)
Installing lock mortise
Following the picture below, take the lock cylinder with its connecting line
on the upper side to install in the cylinder pore on the door. Please do not
make the 4P line in the door. Use 4 flat countersunk head tapping screws to
fix the cylinder. Then take the mechanical lock with this key pore outwards to
install in the cylinder pore and use FM 5 • 65 Machine Screws to fix it. Then
use the mechanical key to exam whether it can be open or not.
Installing the front and back lock panels
Before installing the lock body, please check if the handle springs fall off,
and put the handle square shafts into the lock cylinder. Please notice the
directions of opening left and opening right: the downwards arrow is for
opening right and upwards for left. As showing below, the 3P line connect the
back body and the square shaft of deadbolt should be put in the pore of
cylinder. Then fix the body with 4 pieces FM 5 55 Machine Screws. And next
load the batteries and fix the back covers.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>