Wicked Audio ENDO Wireless Headphone User Manual

Wicked Audio ENDO Wireless Headphone

USER MANUAL

First time use

1 – Make sure that the headset is charged, your phone turned on, with the Bluetooth feature enabled.
2 – Turn on the Wicked Endo and the LED will flash red and blue.
3 – Your mobile phone should detect “Wicked Endo”
4 – Select “Wicked Endo” to pair and once succesfully paired, the LED will slowly flash blue.

Product does not turn on:

1 – Make sure switch is in the “On” position, LED will turn on
2 – If product is in the “On” position, try turning the product to the “On” position and switching back to the “On” position
3 – Make sure battery is charged. Charge battery for at least 30 minutes and power on again.

Your Bluetooth device is unable to search for/locate/pair with Wicked

Audio Bluetooth product:

1 – Be sure your Bluetooth device has Bluetooth capabilities turned on/activated
2 – Be sure your Wicked Audio product is in pairing mode (LED will be flashing Red AND Blue)
3 – Delete/Forget/Unpair the Wicked Audio product from your Bluetooth list on your device or other nearby devices and search again
4 – If still unable to search for/locate/pair with Wicked Audio Bluetooth product, please restart your Bluetooth device and the Wicked Audio product and search again

**Disconnected after your Bluetooth device successfully connect-

ed/paired with your Wicked Audio product:**

1 – The Bluetooth signal has been blocked with an obstruction/ex-ceeded Bluetooth range between your Bluetooth device and the Wicked Audio product OR the “Play/Pause/Answer/Hang up” button was held down for too long and disconnected. You will need to manually select “Wicked Endo” in your Bluetooth list on your device to successfully pair your Endo to your device.
2 – Check to see if the battery is at low power, charge if needed

Unable to connect/pair your desired Bluetooth device with your Wicked

Audio product after connecting your Wicked Audio product with multiple Bluetooth devices:

1 – Your Wicked Audio product will attempt to connect/pair with last Bluetooth device it paired with
2 – Turn off Bluetooth capabilities on other Bluetooth devices in your vicinity that were recently paired to your Wicked Audio product. This will allow your desired Bluetooth product to connect with your Wicked Audio product.
3 – If still unable to pair with Wicked Audio Bluetooth product, please restart your Bluetooth device and the Wicked Audio product and search again.

No sound when talking with someone on the phone using mic on Wicked Audio

product

1 – Make sure the Wicked Audio product is successfully paired with your Bluetooth device
2 – Increase the volume of your Bluetooth device and/or Wicked Audio product

No sound when playing music

1 – Increase the volume of your Bluetooth device and/or Wicked Audio product
2 – Make sure the Wicked Audio is successfully paired with your Bluetooth device

Unable to charge

1 – Wicked Audio product will have a solid Red LED when charging and the LED will turn off when fully charged.
2 – Make sure the USB cable is connecting well with charger and the micro USB cable is connecting well with your Bluetooth device

Line in option

When you’d like to use the headset as normal wired headphones, plug the aux cord into the “line in” port and the Bluetooth feature will shut off. This is handy for listening to movies on the plane, if you don’t want to drain the battery, or if the battery is dead.

After using the line in option, the Endo might need to be turned off and on again to return to Bluetooth pairing mode. It is recommended to turn on the Endo when using the aux cord as the battery will still drain if the Endo is not in the on position.

(Note: When the line in port is being used, the button functions can not be used. All functions must be controlled from the device.)

LIMITED ONE-YEAR WARRANTY

Keep your receipt to obtain warranty service. Go to
www.wickedaudio.com for more details.

Developed in Utah, U.S.A.
Made in China

MODEL #: WI-BT15X
IC: 20526-WIBT15X
FCC: 2AFM7WI-BT15X

This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

DOWNLOAD

Wicked Audio ENDO Wireless Headphone User Manual – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>