nVent HOFFMAN ADK12SS6 Continuous Hinge with Clamps Instruction Manual
- June 13, 2024
- nVent HOFFMAN
Table of Contents
Dripshield, NEMA 4X
ADK12SS6 Continuous Hinge with Clamps
-
Clean top of enclosure with solvent to remove dirt and oil residues.
-
Locate dripshield position per dimensions below. Mark
and drill mounting holes in enclosure with a 13/64 drill
bit. Mounting holes are predrilled in the dripshield. -
Apply sealing compound to mounting flange of dripshield and around each mounting hole. Position dripshield and secure with stainless screws with o−rings and stainless nuts.
This accessory maintains UL/CSA Type 12,4,4X when installed per these
instructions.
This accessory is covered by UL file E61997 and CSA file LR42186.
Rev. D
© 2019 Hoffman Enclosures Inc.
PH 763 422 2211 • nVent.com/HOFFMAN
P/N 99401626
87569053
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>