nVent HOFFMAN AFC412SS Fast Operating Clamp Instruction Manual
- June 13, 2024
- nVent HOFFMAN
Table of Contents
Fast−Operating Clamp Assembly
AFC412SS Fast Operating Clamp
-
Remove the existing screw clamps.
-
Install the fast−operating clamp by turning the clamp handle until the threads engage with the clamp bracket.
-
Flip the clamp handle down ensuring that the clamp engages with the door flange.
-
Tighten the clamp handle until the sides of the clamp fully contact the clamp bracket.
-
Loosen the clamp handle not more than one full rotation to align it parallel to the cover as shown below.
-
Repeat the installation for each enclosure clamp.
NOTE: The number of clamps varies by the size of the enclosure.
© 2018 Hoffman Enclosures Inc.
PH 763 422 2211 • nVent.com/HOFFMAN
87788824
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>