nVent HOFFMAN F88BK60 Wireway Barrier Kit Instruction Manual
- June 13, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN F88BK60 Wireway Barrier Kit Instruction Manual
Wireway Barrier Kit Installationssatz Sperre Wireway
Kit De Barrière De Wireway
Kit De la Barrera De Wireway
-
Cut wireway barrier to desired length. If the barrier is cut to a length other than 1, 2, 3, or 4 feet, it will be necessary to drill a 7/32 inch diameter hole approximately one inch from each end of the barrier.
-
Position a nylon channel over each end of the barrier as shown. For catalog number F44BK60, cut the provided nylon channel in half and position one piece over each barrier end.
-
Position the barrier in the wireway. Using the barrier as a template, locate and drill 7/32 inch diameter holes in the wireway.
Maximum recommended spacing between holes is 24 inches. -
Bolt the barrier to the wireway as shown.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Loading......