BliTZWOIF BW-JA Air Pump Emergency Starting Power Supply Instruction Manual
- June 4, 2024
- BliTZWOIF
Table of Contents
BliTZWOIF BW-JA Air Pump Emergency Starting Power Supply
Tips Please read the instruction manual carefully and use the product correctly according to the instructions in the operation manual, so that you can get familiar with the product more easily and quickly.
Description of key functions
Product Parameters
Air pump instructions
This product is suitable for. All kinds of cars (excluding trucks and
engineering vehicles), motorcycles, electric cars, all kinds of bicycles,
balls, balloons, life buoys, swimming rings, inflatable mats, kayaks and other
inflatable products. This product is for the need to Inflate the parts of the
automatic inflatable function, air pressure reaches the standard value can
automatically stop intelligent settings and simple operation. This product is
also a precision digital display air pressure measurement tool, any need to
measure air pressure parts, can use this product for measurement. This product
is equipped with a long-range LED lighting function and daily lighting
function, which allows you to operate clearly in a dark environment without
lights, without fear of darkness.
This product is set up with four pumping modes, “car, and “motorcycle”. “bicycle”, “ball”, you can choose the appropriate mode according to your own needs, each mode has a differential pressure default value. Each made has a different airpressuredefaultvalue. You do not need to set your own, of course, If these default values do not meet your needs, you can set your air pressure value, pumping, and so on, when the air pressure reaches your set value, the pump will automatically stop, do not have to be on the sidelines to guard, you can do things while pumping, without delay.
Operating Instructions
Automobile \Motorcycle \Electric Vehicle\Bicycle Category
Connect the nozzle tube of the accessory to the air outlet hole of the pump
and screw It tightly, and fasten the nozzle to the air core of the tyre and
then fasten the pressure handle, press and hold to turn on the pump, then It
will flash a few times and then show the tyre pressure value, make sure that
the pumping made Is correct and then press to start the pump to start pumping,
and then It will stop by Itself when it reaches the set value.
Balls/Swimming Rings/ Air Cushions
Connect the nozzle tube of the accessory to the air outlet hole of the
inflatable pump and screw it tightly, fasten the nozzle to the ball needle (or
other two kinds of conversion nozzles) and then fasten the pressure handle,
make sure that the pumping mode is correct and then press ( ) to start
pumping, and then it will stop by itself when it reaches the set value. The
product offers four air pressure units for You To choose from. PSl, Bar, Kpa,
Kg/cm’
Defaull tyre pressure for each mode
Power button C
Long press 1o fum on/off, short press to start/stop Infection after turning
on, automatic shutdown after 1 minute unused.
Mode switching
This product provides four Inflatable modes for you to choose from. It is
convenient for you to switch to use in different places. These four modes are:
“car, “motorcycle”, “bicycle”, ‘”Bair you can use the You can use the Mode
button 5″ to switch between the
four modes and the default value of the air pressure will be changed
automatically after the selection
Unit switching
This product provides four pressure units for you to choose from. To
facilitate the use of habits in your location, and switch to use by yourself.
These four units are: ‘PSI,” BAR”, “KPA”,” kg/cm2″ You can switch using the
unit key.
Set value adjustment
This product has a default air pressure value, but if you cannot meet your
needs, you can also manually adjust the air pressure value, by pressing the (
) key to Increase or decrease the number. adjust to the value you want to wait
3 seconds to automatically set. At this point. the air pump pressure setting
value has changed to the number you sat, At this time, press the key to start
the air pump.
LED lighting
This product is equipped with a long-range LED lighting function and doiły
lighting function, so that you can operate clearly in a dim environment
without lights, without night.
- Press f the far spotlight Is on. press 2 on the far spotlight to switch SOS
- Press 3 on the light with a weak gear, 4 on the light with a strong gear,
- Press 5 to turn off the LED light, and then press 5 to turn off the LED light.
Operating instructions
- Light weight easy to carry and stare. it is a road trip, outdoor activities, and daily necessities.
- Mułl1ple functions In one: tyre pressure detection, air pump, and night lighting. Eight-fold protec11on for safe use
- Strong inflation capacity up to 50PSI. High precision tyre pressure detection, O.Ol Kg/cm2.
- Wide range of high and low-temperature operating temperatures, -2oc- +ć0°C range.
Emergency starting power supply instructions
Inis product is suitable for 112V system vehicles
How to start the car
Before using this product to start the car, it is necessary to charge the car
generally as long as more than 15% can start the car: The red clip holds the
positive end of the gallery, and the black clip holds the negative end of the
battery. Then plug the battery clamp into the starting outlet/of this product,
and then furl the car key nto the starting gear or press the car start button.
After successful startup, unplug the product first, and then remove the
battery clip from the/car battery. if not wait one minute and repeat the
preceding steps.
The operation process is as follows
- the battery clamp plugs into the corresponding hole of this! product
- Use thel matching clip tol connect thel can gallery
- Start the car.
- Unplug the battery clamp from the product
- Remove the clamp from the positive and negative terminals of the car battery.
Precautions for emergency
power stan
- before each state. please fully Charge to ensure sufficient power (more than 75%:
- Fully insert thel battery cable connector into thel EC5 interface of the product:
- the red clip fully clamps the positive ( ) pole of the battery, and the black clip fully clamps the negative pole of the battery (very mportant):
- after the car starts, please unplug it within 30 seconds. and then remove the battery clamp.
- does not start continuously. start time should not exceed 5 seconds. Start unsuccessful interval of more than 1 minute to start the second time (do not start| continuously. very important):
- before starting the car please turn off all electronic equipment in the car. such as air conditioning. lights, entertainment system, etc.
Matters needing attention
This product & is not allowed to be used by children alone, and children need
to be accompanied by adults. Never inflate a trachea into the mouth, ears,|
nose, or eyes of a human or animal Do not use this product as a joy. Do not
use this product near flammable and explosive liquids and gases (such as gas
stations, and filing stations) Inflation will produce a pressure operation of
the physical heart phenomenon, so please be careful when disassembling the gas
pipe hot After 10 minutes of continuous use if $ necessary to interval 15
minutes, and then continue to use the machine after cooling to extend the life
of thel machine.
Q&A
lf you have any other questions, please contact customer service for help.