Shenzhen Bo Lian Sheng Technology YET-M1 USB Receiver Instruction Manual
- June 5, 2024
- Shenzhen Bo Lian Sheng Technology
Table of Contents
Shenzhen Bo Lian Sheng Technology YET-M1 USB Receiver Instruction Manual
Wireless Audio Receiver
Easily connect with your speakers/headphones etc,wirelessly receive music from your BT A2DP enabled smartphone,tablet or computer from up tO 10m away! Utilizes BT digital audio signal with A2DP streaming for a powerful, enhanced CD audio quality. Plugs directly into your speakers or stereos’ AUX line-in port via 3.5mm audio jack pulug! Powered by USB port, convenient and universal.
INSTRUCTIONS
- Connect YET-M1 with your speaker with the audio cable provided
- Plug YET-M1 into a working USB port
- Go to your phone or other device’s BT settings page, search for new BT device
- Upon new device found (YET-M1), tap the device name to connect
- If it’s asking for a code, please input 0000 (may not required)
- Make sure your speaker is under AUX audio input mode.
Powered by USB
3.5mrn audio port
Transmission distance≥10m
SPECIFICATION
- Dimensions: 40mm x 20mm x lOmm
- Power Source: USB 5V
- Wireless Range: Up to 10M
- Output Port: 3.5mm Jack
- Output Rage: 44.1 KHz And 48KHz
- BT Version: BT 3.0+ EDR
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
