Wyze NN Cam Pan v3 Security Camera User Guide
- June 13, 2024
- Wyze
Table of Contents
Wyze NN Cam Pan v3 Security Camera
GET BETTER SECURITY WITH
Record Full-Length Videos
Get unlimited full-length video recordings.
Smart AI Detection
Detect people, packages, vehicles, and more.
Back-to-Back Event Recording
Capture everything without 5-minute gaps.
Exclusive Discounts
Get exclusive discounts on Wyze products.
Subscribe or learn more atservices.wyze.com.
IN THE BOX
- Wyze Cam Pan v3 × 1
- USB Cable × 1
- Power Adapter × 1
- Quick Start Guide × 1
Disclaimer: The products, accessories, user interfaces, etc. illustrated in this guide are intended for reference only. Due to product updates, the actual product and the illustrations in this guide may vary.
PRODUCT DESCRIPTION
- Status Light
- Lens
- Microphone
- SETUP Button
- MicroSD Card Slot (Card not included)
- Speaker
- Power Input
FRONT
BACK
BOTTOM
SETUP
- Download the Wyze app and sign in or create an account.
| 
---|--- - Connect the camera to a power outlet and wait for 15 seconds until the status light flashes red.
- Press the SETUP button for 3 seconds until a voice prompt sounds.
- Open the Wyze app and tap the + sign in the top left corner of the Home tab. Tap Add Device > Cameras > Wyze Cam Pan v3 and then follow the instructions.
LIGHT INDICATORS DURING INSTALLATION
| Solid red light
The device is powered on and initializing
---|---
| Flashing red light
The device is ready to connect
| Flashing red and blue lights
Connection is in progress
| Flashing blue light
The device is connected and finishing setup
| Solid blue light
The device is working properly
| Solid red light
Livestream is being viewed or a recording is in progress
| Quickly flashing red light
Siren is in use
| Solid blue light
The device is working properly and no operations are running
FCC WARNING
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED RSS WARNING
This device complies with ISED license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
ISED RADIATION EXPOSURE STATEMENT
This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Only use the power supply provided.
NEED HELP?
Contact our Support Team:https://wyze.com/support
Join the Community:https://wyze.com/community
Scan the QR code to learn more
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>