Big Lots 810569917 7ft Berry Spruce Frosted Tree Instruction Manual

June 9, 2024
BIG LOTS

810569917 7ft Berry Spruce Frosted Tree
Instruction Manual
7FT BERRY SPRUCE FROSTED TREE

ITEM# EXB-111788-7FT
SKU# 810569917

WARNING

– Risk of Fire and Electric Shock:

  1. Read all instructions and warning tags included with this tree.
  2. Do not place near sources of heat.
  3. Do not install near standing water that the tree may fall or blow into.
  4. Keep wires clear of being pinched or cut during assembly or installation. Discard sets with cut or pinched insulation.
  5. Do not press or grasp bulbs during assembly or installation.
  6. Make sure that after final assembly that tree is stable and upright.
  7. Do not use candles on tree. Use only with the included mini lights.
  8. Do not overload extension cords or power strips.
  9. Always fully insert electrical plugs into a outlet.
  10. This product is for decoration use only. Not to be used by children as a toy. Keep out of reach of small Children.
  11. Artificial trees are made from small fibres and have small parts, which may pose a choking hazard if detached from the branches.

No tools required for assembly

Before You Start

  1. Decide on an appropriate location for your product.
  2. Retain the instructions for future use and save the carton for storing your tree.

Assembly and Instruction Procedure:
Every carton should contain a top section, middle section and bottom sections. Also included is a metal base. Remove all Packaging (i.e. cardboard or plastic) before beginning.

  1. Remove the metal base from the package, open fully, and tighten halfway using the locking screw. Do not tighten fully, as you must leave room for the tree pole.
  2. Insert the largest bottom section of the tree into the stand, and then finish by tightening the locking screw on the stand to secure the tree pole in place.
  3. Insert the middle tree section into the top pole opening of the bottom section, and then the smallest top tree section into the pole opening of the middle section.
  4. Carefully connect the light cords from each section together, beginning from the top and working down toward the lowest section.
  5. Plug tree lights into a power outlet.

YOUR TREE IS NOW READY TO ENJOY!
Storage Tips:

  1. Warning – Disconnect cord from power source.
  2. Remove all decorations.
  3. Starting from the top, press the tips back up against the stem.
  4. Disassemble and place the branch sections back into the carton, putting the longest one on the bottom.
  5. Disassemble the base.
  6. STORE THE PRODUCT IN A COOL, DRY LOCATION PROTECTED FROM SUNLIGHT, AND WHERE THE TEMPERATURE DOES NOT EXCEED 40°

TROUBLE SHOOTING INSTRUCTIONS

If Lights Do Not Work:

  1. Make sure the lights are plugged in and there is power to the outlet that they are connected to.
  2. Check whether all bulbs are tightly fixed into the light holder.
  3. If a bulb is blown, replace the faulty bulb following the diagram below. There are spare bulbs included for easy replacement.
  4. If none of the lights are working in a set, check the fuse in light string plug. If the fuse is blown, replace the blown fuse following the diagram below. There are spare fuses included for easy replacement. Make sure you check both fuses.

USER SERVICING INSTRUCTIONS

To replace burned-out bulbs, follow directions below:

  1. Grasp plug and remove the receptacle or other outlet device. Do not unplug by pulling on cord.
  2. Unlock the plastic clip and pull bulb and plastic base straight of bulb holder.
  3. Remove base of burned out bulb by straightening wires and gently pulling bulb out.
  4. If your replacement bulb must be removed from its base follow step 3.
  5. Thread wires of replacement bulb through holes in old base with one wire in each hole.
  6. After bulb is fully inserted into base, bend wires up, one on each side, like other bulbs in your set so that the wires will touch the contacts inside the sockets.

Safety Plug With Replaceable Fuses
a) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
b) Slide open fuse access cover on top of attachment plug towards blades.
c) Remove fuse carefully.
d) Risk of fire. Rep/ace fuse only with 3 Amp, 125 Volt fuse (provided with product). e) Slide closed the fuse access cover on top of attachment plug, or push cover closed so that all tabs latch,
f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.

Flame Retardant
SAVE THESE INSTRUCTIONS
MADE IN CHINA

Documents / Resources

| Big Lots 810569917 7ft Berry Spruce Frosted Tree [pdf] Instruction Manual
810569917 7ft Berry Spruce Frosted Tree, 810569917, 7ft Berry Spruce Frosted Tree, Berry Spruce Frosted Tree, Spruce Frosted Tree, Frosted Tree, Tree
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals