nVent HOFFMAN PGS2K Grounding Bar Instruction Manual
- June 13, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN PGS2K Grounding Bar
Product Information
This product is a grounding bar used for electrical installations. It is
designed to prevent electric shock and protect equipment from damage by
providing a secure grounding connection.
The product is designed to be installed in an enclosure and should be used
according to the provided instructions to ensure proper installation and
functionality.
Product Usage Instructions
WARNING: To avoid electric shock and equipment damage, it is crucial to
disconnect power to the enclosure before starting the installation process.
Before installing the ground system, carefully read and follow the
instructions provided below:
- Identify the appropriate location for the grounding bar within the enclosure.
- Using an M6 screw, secure the grounding bar to the designated location.
- Repeat step 2 using an M5 screw.
- Ensure that all connections are tight and secure.
- Check that the grounding bar is properly aligned and positioned.
- If necessary, repeat steps 2-5 for additional grounding bars.
- Refer to the provided diagram (Rev. D) for specific configuration details.
- Make sure to use the correct part numbers (P/N 87749942 and 87569869) for replacement or additional grounding bars.
Following these instructions will help prevent damage to the product and ensure a safe and effective grounding system.
WARNING
To avoid electric shock and equipment damage, disconnect power to enclosure
before starting installation. Before installing ground system, read these
instructions carefully. Failure to follow instructions could damage the
product or cause a hazardous condition
DESCRIPTION
INSTRUCTION
Optional Mounting of End Brackets
© 2018 Hoffman Enclosures Inc.
nVent.com/HOFFMAN P/N 87749942
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>