DESIGNlab EMUP48 Warp Pro 48 Gaming Desk With Led Lights USB Instruction Manual

EMUP48
BATTLESTATION GAMING DESK
OPERATING INSTRUCTIONS

EMUP48 Warp Pro 48 Gaming Desk With Led Lights USB

WARNING

1. Do not use unless all bolts screws and knobs are securely tightened.
2. Check that all bolts screws and knobs are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
4. Do not use as a stepladder.
5. Use for its intended purpose only.
6. Use mild detergent only for cleaning.

OSP FURNITURE LIMITED PRODUCT WARRANTY

Design Lab Products

• 3 years on gaming desks and chairs
• Upholstery is not warranted against routine scratching and scuffing

*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or less.
This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. – 3:30 p.m. Pacific Time.

|

WIRELESS CHARGER – SAFETY WARNINGS & INSTRUCTIONS FOR USE

Your desk includes wireless charging capabilities using the wireless charger as shown.
Please carefully follow the instructions and safety warnings below before using the wireless charger with your supported device. NOTE: The wireless charger included supports most devices with wireless charging capabilities. Please consult your device’s OEM instruction manual for proper wireless charging use, safety warnings, and limitations. Stop using the wireless charger IMMEDIATELY if your device becomes hot. Improper use of the wireless charger, using non-compatible devices, or tampering with the wireless charger In any way may cause device failure, damage, or injury.

SAFETY WARNINGS – PLEASE READ FIRST

Devices with cases thicker than 4mm may not allow wireless charging. Remove the case from the device or use the USB port for wired charging instead.
Devices with rings, kickstands, or finger grip accessories will not allow wireless charging. Remove the accessories or use the USB port for wired charging instead.
DO NOT attempt to wireless charge devices with metallic cases, metallic attachments, or magnetic attachments. Remove the device from such cases or use the USB port for wired charging instead.
DO NOT allow any metallic foreign objects or liquids to come in contact with the wireless charger. Only devices that support wireless charging should be put on the wireless charger surface.
Rotate the dust cover 90 degrees counter-clockwise to cover the USB charging port when not in use.
To Power ON the Wireless Charger
Plug the USB cable from the bottom of the wireless charger into any powered USB 2.0 port, or any 5V power adapter that accepts a USB plug.
USB Port on wireless charger will light up RED once powered on. The charger is now ready to use.
Using the Wireless Charger
To charge your device using wireless charging, place the device centered on the wireless charger face and wait for the device to indicate it has begun charging. Using the USB Charge Port
To charge your device using USB charging port, plug in your device’s USB charging cord into the USB port as shown and wait for the device to indicate it has begun charging.

LED LIGHT REMOTE CONTROL – INSTRUCTIONS FOR USE

Your desk includes an integrated LED light strip with customizable RGB LED lights. The lights are controlled using the included LED Remote Control. Please refer to the Button Feature Diagram below for an outline of the remote’s functions. A Troubleshooting FAQ is also included below for frequently asked questions and general usage troubleshooting. This remote uses a single CR2025 3V Lithium coin battery, located in the pull out battery tray tab on the back-bottom edge of the remote.
LED Light Remote Control:
Button Feature Diagram

TROUBLESHOOTING FAQ

Problem:| Solution:| Also Check:| Also Check:
0: LED Lights won’t turn on?| Press the Power ON/OFF button| Double check that the LED Power Supply is connected to the LED strip on the desk and the power supply is plugged into a power outlet.| Remove the clear tab from thebattery tray on first use. After prolonged usage, the battery (CR2025-3V Lithiumm) may need to be replaced.
Q: DYI lights will not program?| When first programming the DIY section, the lights will start off white. Hold DOWN any of the RGB colored arrows firmly until you see the light begin to shift in color. Once a color range has been removed, it is easier to begin customizing the DIY color. Make sure to press the SAME DIY # button you first pressed during the programming process to save the custom color

FCC INSTRUCTIONS

NOTE: This equipment has been tested and found to comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• Instructions shall caution users that modifications not approved by part responsible for compliance could void user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>