KENWOOD MC-90 Deluxe Desk-Top Microphone Instruction Manual
- June 13, 2024
- KENWOOD
Table of Contents
KENWOOD CORPORATION
DELUXE DESK-TOP MICROPHONE
MC-90
INSTRUCTIONS MANUAL
MC-90 Deluxe Desk-Top Microphone
Thank you for Purchasing this microphone. (MC-90) The MC-90 is a high-grade microphone that contains a high-quality transducer element that was designed for use with high performance audio equipment. It gives unrivaled transmission sound quality when used with a transmitter equipped with DSP (digital signal processing)
IMPORTANT: Please read this Instruction Manual carefully before using the product.
Ratings
| Type | Dynamic microphone with PTT circuit |
|---|
Microphone.
element| Moving-coil, unidirectional type.
Impedance| 250Ω
Sensitivity (dB)| -78de
(OdB =1V / μ BAR,1000Hz)
Dimensions (mm)| 90 X 205 X176
Weight (k g)| 1.1k g
Functions and names
① UP/DWN (Up/down) key
This key increments or decrements the transmit/receive frequency. If you hold
the key down, the frequency changes continuously.
② PTT (Push-to-talk button) Hold this button down to transmit.
③ LOCK switch
Press this switch to lock the unit in the transmit mode. Press it again to
return to receive mode.
④⑤ Replacement microphone head
You can change the frequency response of the microphone by changing the
microphone head. (Refer to the accompanying chart for the audio frequency
response of each head).
⑥ Bottom switch
You can change the low-frequency range response by setting the switch to the
M, V1, or V2 position.
(Refer to the accompanying chart for the audio frequency response in each
position).
⑦ Microphone pins
• Pin numbers and names
| Pin No. | Pin name |
|---|---|
| 1 | MIC |
| 2 | PTT,LOCK |
| 3 | UP |
| 4 | DOWN |
| 5 | NC |
| 6 | NC |
| 7 | MIC-GND |
| 8 | GND |
• Connector pin layout as viewed from the front
Note: Since the MC-90 uses a transducer with a wide frequency response, it is some what less sensitive than conventional transmitter microphones. When you use the MC-90, adjust the MIC control for an on-Scale ALC reading.
Frequency Response Carve
(Graph showing the output level versus the input audio frequency in the voice- frequency range centered around 1 kHz)
-
When head ④ is used
-
When head ⑤ is used
Circuit diagram
• Microphone stand connection diagram
• Audio connection diagram
• Microphone cable connection diagram
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>