D-Link DGS-1100-05V2 Smart Managed Network Ethernet Switch User Manual
- June 13, 2024
- D-Link
Table of Contents
D-Link DGS-1100-05V2 Smart Managed Network Ethernet Switch
Introduction
The D-Link DGS-1100-05V2 is a 5-port Smart Managed Ethernet switch with the goal of giving small and medium-sized enterprises an affordable way to improve network security and performance. With the help of this switch’s advanced features, which are generally only found in managed switches, users may optimize network performance without having to deal with the hassle of extensive management. The DGS-1100-05V2 is simple to deploy and administer due to its small size and plug-and-play capabilities.
Specifications
- Ethernet Ports: 5x 10/100/1000BASE-T ports (RJ45)
- Switching Capacity: 10 Gbps
- Jumbo Frame Support: Yes, up to 9216 bytes
- Forwarding Rate: 7.44 Mpps (64-byte packet size)
- MAC Address Table Size: 2K entries
- VLAN Support: Yes, including 802.1Q VLAN tagging and port-based VLAN
- QoS (Quality of Service) Support: Yes, with 802.1p priority tags and DSCP-based QoS
- Link Aggregation (LAG/LACP): Yes, supports static and dynamic LAG
- Management Interface: Web-based graphical user interface (GUI)
- Security Features: ACL (Access Control List), D-Link Safeguard Engine, Port Security
- Loopback Detection: Yes
- IGMP Snooping: Yes
- Energy-Efficient Ethernet (EEE): Yes
- Power Supply: External AC adapter
FAQ’s
Is the DGS-1100-05V2 a managed switch?
Yes, the DGS-1100-05V2 is a smart managed switch, offering advanced features that provide greater control over network performance compared to unmanaged switches.
What are the port speeds of the DGS-1100-05V2?
The DGS-1100-05V2 features 5 Ethernet ports, all of which support Gigabit Ethernet speeds (10/100/1000 Mbps).
Can I enable jumbo frames on this switch?
Yes, the DGS-1100-05V2 supports jumbo frames, allowing you to increase the frame size up to 9216 bytes for more efficient data transmission.
How do I manage the switch?
You can manage the DGS-1100-05V2 through its web-based graphical user interface (GUI), which provides an intuitive and user-friendly platform for configuration and monitoring.
Does this switch support Virtual LANs (VLANs)?
Yes, the DGS-1100-05V2 supports VLANs, including 802.1Q VLAN tagging and port- based VLANs, enabling network segmentation for improved security and traffic management.
Can I prioritize certain types of traffic with QoS?
Yes, the switch supports Quality of Service (QoS) features, allowing you to prioritize specific traffic by applying 802.1p priority tags and DSCP-based QoS.
Is there support for Link Aggregation (LAG/LACP) on this model?
Yes, the DGS-1100-05V2 supports Link Aggregation, both static and dynamic, which allows you to combine multiple ports for increased bandwidth and redundancy.
What security features does the switch offer?
The switch comes with security features like Access Control Lists (ACL), D-Link Safeguard Engine, and Port Security to enhance network security and protect against unauthorized access.
Does the switch support IGMP Snooping?
Yes, IGMP Snooping is supported, which helps optimize multicast traffic by forwarding multicast packets only to interested recipients.
Is Energy-Efficient Ethernet (EEE) supported?
Yes, the DGS-1100-05V2 supports Energy-Efficient Ethernet (IEEE 802.3az), which helps reduce power consumption during periods of low network activity.
What is the switching capacity of the switch?
The DGS-1100-05V2 has a switching capacity of 10 Gbps, enabling high-speed data transmission between connected devices.
Can I mount the switch on a wall?
Yes, the switch is designed for both desktop and wall-mounting, providing flexibility in installation options.
User Manual
References:D-Link DGS-1100-05V2 Network Ethernet Switch – Device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>