Wicked Audio BANDIDO Wireless Earbuds User Manual

: June 13, 2024
: WICKED AUDIO

Table of Contents

Wicked Audio BANDIDO Wireless Earbuds
Important Safety Instruction
FIRST TIME USE
FUNCTIONS
TROUBLESHOOTING
PRECAUTIONS
SAFE USE & HAZARD WARNINGS
SPECS
BLUETOOTH
IC: 20526-WIBT265X
LIMITED ONE YEAR WARRANTY
DOWNLOAD
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wicked Audio BANDIDO Wireless Earbuds

USER MANUAL

Important Safety Instruction

Read these instructions.
Keep these instructions
Heed all warnings
Follow all instructions.

Attention should be drawn to the environmental aspects of battery disposal;
The use of apparatus in moderate climates

FIRST TIME USE

1| Make sure that the headset is charged, your phone turned on, with the Bluetooth feature enabled.
---|---
2| Turn on the Wicked Bandido and the LED will ash red and blue.
3| Your mobile phone should detect “Wicked Bandido”
4| Select “Wicked Bandido” to pair and once succesfully paired, the LED will slowly ash blue.

FUNCTIONS

Overview

TROUBLESHOOTING

1. Product does not turn on:

1a – Hold down power button for 3-5 seconds until LED turns on
1b – Make sure battery is charged. Charge battery for at least 30 minutes and power on again

2. Your Bluetooth device is unable to search for/locate/pair with Wicked Audio Bluetooth product:

2a – Be sure your Bluetooth device has Bluetooth capabilities turned on/activated
2b – Be sure your Wicked Audio product is in pairing mode (LED will be flashing Red AND Blue)
2c – Delete/Forget/Unpair the Wicked Audio product from your Bluetooth list on your device or other nearby devices and search again
2d – If still unable to search for/locate/pair with Wicked Audio Bluetooth product, please restart your Bluetooth device and the Wicked Audio product and search again

3. Disconnected after your Bluetooth device successfully connected/paired with your Wicked Audio product:

3a – The Bluetooth signal has been blocked with an obstruction/exceeded Bluetooth range between your Bluetooth device and the Wicked Audio product
3b – Check to see if the battery is at low power, charge if needed

4. Unable to connect/pair your desired Bluetooth device with your Wicked Audio product after connecting your Wicked Audio product with multiple Bluetooth devices:

4a – Your Wicked Audio product will attempt to connect/pair with last Bluetooth device it paired with
4b – Turn off Bluetooth capabilities on other Bluetooth devices in your vicinity that were recently paired to your Wicked Audio product. This will allow your desired Bluetooth product to connect with your Wicked Audio product.
4c – If still unable to pair with Wicked Audio Bluetooth product, please restart your Bluetooth device and the Wicked Audio product and search again.

5. No sound when talking with someone on the phone using mic on Wicked Audio product

5a – Make sure the Wicked Audio product is successfully paired with your Bluetooth device
5b – Increase the volume of your Bluetooth device and/or Wicked Audio product

6. No sound when playing music

6a – Increase the volume of your Bluetooth device and/or Wicked Audio product
6b – Make sure the Wicked Audio is successfully paired with your Bluetooth device

7. Unable to charge

7a – Wicked Audio product will have a solid Red LED when charging and the LED will turn off when fully charged.
7b – Make sure the USB cable is connecting well with charger and the micro USB cable is connecting well with your Bluetooth device

PRECAUTIONS

LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.

Over exposure to excessive sound levels can damage your ears resulting in permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs.

SAFE USE & HAZARD WARNINGS

90 dB SPL at 8 hours| 95 dB SPL at 4 hours| 100 dB SPL at 2 hours| 105 dB SPL at 1 hours
---|---|---|---
110 dB SPL at 30 min| 115 dB SPL at 15 min| 120 dB SPL: Avoid as damage may occur

SPECS

DRIVER : 10 mm Neodymium
SENSITIVITY : 100 dB
FREQUENCY : 20-20,000 Hz
IMPEDANCE : 16 Ohms

BLUETOOTH

VERSION 4.2
RANGE : 32 Feet/10 Meters
BATTERY LIFE : 5+ Hours
CHARGE TIME : 1.5 Hour

IC: 20526-WIBT265X

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Model #: WI-BT265X-CA
FCC ID: 2AFM7WI-BT265X
IC: 20526-WIBT265X