Maiwe Admas2208P-M12-8TPOE Industrial Ethernet Switch User Manual
- June 13, 2024
- maiwe
Table of Contents
Industrial Ethernet Switch
Admas2208P-M12-8TPOE
User manual
Packing list
The package of this switch contains the following items. If any item is found to be missing or damaged, please contact the agent or the customer service center of Maiwe for assistant
| Items | Quantity | Remarks |
|---|---|---|
| Industrial Ethernet Switch | 1PCS | |
| User Manual | 1PCS |
Product description
Admas2208P-M12-8TPOE is 8 ports unmanaged din-rail industrial POE switch. The switch uses a six-sided fully enclosed structure and is designed for a dedicated industrial vehicle communication network.The product supports dual power supply redundant power supply, adopts M12 A-code design.V1+, V1- is a group of power input, V2+, V2- is another group of power input. It supports 8 ports POE copper ports with M12 D-code interface.Each M12 port has self- adaptive function, supports self-adaptive MDI, MDI-X connection. All 8 Ethernet copper ports support POE, support IEEE802.3af/at protocol, and a single port can support up to 30W power output.
Interface description
Unit:mm
- Switch mounting ear
- Ground screw
- Power input interface
- Indicator light
- 100M M12 interface
Connect to the Power
Support 2-way power input, using M12 A-code 4-pin male connector, power input
range: Dc4V (Dc18-36V).
| Number | Pin definition | Pin description |
|---|---|---|
| 1 | V1- | Power input V1-Negative(DC) |
| 2 | V2- | Power input V2-Negative(DC) |
| 3 | V1+ | Power input V2+Positive(DC) |
| 4 | V2+ | Power input V1+Positive(DC) |
M12 100M interface It supports 8×10/100M full/half duplex Ethernet interfaces, 1-8 interface adopts M12 D-code 4-pin female connector.
| Number | Pin definition | Pin description |
|---|---|---|
| 1 | TX+ | 100M Ethernet sending data positive |
| 2 | RX+ | 100M Ethernet receiving data positive |
| 3 | TX- | 100M Ethernet sending data negative |
| 4 | RX- | 00M Ethernet receiving data negative |
The indicator description of the switch is shown in the following table.
| Indicator lights | Status | Definition |
|---|
System status LED
P1/P2| On| Power is connected and operating normally
Off| The power is unconnected or the system is abnormal
RUN| Blinking| Device is working normal
On/Off| Device is working abnormal
Fiber Status LED
L/A| On| The port has established a valid network connection
Blinking| The port has network activity
Off| The port has not established a valid network connection
Ethernet RJ45 Status LED
Each Ethernet RJ45 port has two indicator lights, the yellow light is the POE
port rate indicator, and the green is the port
PoE| On| PoE port is powered normally
(Yellow)| Off| PoE port is powered abnormally
LINK/ACT
(Green)| On| The port has established a valid network connection
Blinking| The port has network activity
Off| The port has not established a valid network connection
Hardware installation
Installation Precautions
To prevent equipment damage or personal injury caused by improper use, observe
the following precautions:
During the installation process, you need to wear anti-static gloves or anti-
static gloves, and power-off the switch.
Please make sure that the input voltage is within the input voltage range
marked on the switch.
The transmission distance has a certain relationship with the connected wire.
It is recommended to use a standard Cat5e/6 network cable.
The equipment must be grounded for lightning protection, otherwise the
protection level of the equipment will be greatly reduced; please use a wire
of No. 20 or more to connect the grounding terminal to the ground.
The power line, ground line and signal line are laid out separately and the
distance is not less than 5cm.
Device installation
Determine the mounting hole position according to the provided size or
product. Device connection
Connect the network cable to the port in the correct Connect to the Power
Before connecting the power cord, make sure that the ground is connected. Do
connect the power cord to the power terminal of the device according to the
definition.
Specifications
| MIEN3205GP-GF-4GTPoE
---|---
Switch performance
Bandwidth| 5.6G
Cache size| 4Mbit
MAC table size| 8K
Interface
100M copper port| 10/100M Base-TXRJ45 ports,Support full duplex/half
duplex self-adaptation, support MDI/MDI-X
self-adaptation
1-8 ports support POE,The 100M port is led out through
the M12 D-code 4-pin female connector.
POE port output
power| each port<=30W
Power
Power
consumption| 5W(Do not include POE power consumption)
DC input| DC24V
Mechanical
Size| 180mmx170mmx64.6mm
Shell| Metal
IP protection| IP40
Weight| About 0.5kg
Working environment
Operating temp.| -40～+70℃
Storage temp.| -40～+85℃
Humidity| 5～95% (No condensation)
Industry standard
EMC| IEC61000-4-2(ESD), Level3
IEC61000-4-5(Surge),
Level43IEC61000-4-4(EFT), Level3
Order guide
| Model | 100M POE copper port | t Power supply |
|---|---|---|
| Admas2208P-M12-8TPOE | 8 | DC18-36V |
Pledge
Thank you for purchasing Maiwe products. You will enjoy the following services
when using Maiwe products.
We solemnly promises: under normal use, one month’s return, one-year free
maintenance, five-year warranty, and lifetime maintenance. The specific
details are as follows:
If Maiwe products have quality problems and cannot work normally, they will be
refunded for one month, free maintenance for one year, warranty for five
years, and maintenance for life.
If the number of repaired products is less than 10, the repair service will be
completed within 7 days (excluding transportation time), and the repair
service will be completed within one month for more than 10 sets.
Optical passive products such as optical fibers, optical cables, jumpers,
flanges, and optical cable terminal boxes are guaranteed within two years, but
no return service is provided.
The accessories and power supply that come with the product are guaranteed for
one year.
When sending the product back to Maiwe for repair, it is recommended that the
customer use the original packaging or the packaging with the same protective
effect, otherwise the customer shall bear the risks that occur during the
transportation.
The repaired product can enjoy another 6 months warranty service.
The product after-sales service is detailed in the purchase and sale contract,
and Maiwe has the final interpretation right of this description.
Wuhan Maiwe Communication Co., Ltd.
Add: Building E2, No. 2 Building, Area E, No. 52 Liufang Avenue, East lake
High-tech Development Zone, Wuhan, China.
Tel: 027-87170215/16
Fax: 027-87170217
Post Code: 430205
Site: www.maiwe.com
Statement
Due to the continuous updating and improvement of products and technologies,
the contents of this manual will be updated from time to time. All the
information in the manual is only used for instructions, if the content in the
text does not completely match the actual product, please understand and
please contact our customer service in time.
Copyright 2021 Maiwe Communication All rights reserved.
The right to interpret the information published in this material belongs to
Wuhan
Maiwe Communication Co., Ltd.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>