SCAME BE-W Series Charging Station Wall Box Instruction Manual
- June 13, 2024
- SCAME
Table of Contents
SCAME BE-W Series Charging Station Wall Box
Product Information
The product is a Serie BE-W with the article number 205.Wxxx. It is a mounting device with dimensions of 1200mm x 235mm x 112mm. The product supports various modes of operation including Personal and Free mode. It has a power supply connection for L, N, PE or L1, L2, L3, N, PE. The product also features a serial line, TCP/IP line with an RJ45 CAT5 connector, and supports max PG 21 and max PG 11 connections. The product is manufactured by InfoTECH in Italy and is available worldwide.
Product Usage Instructions
- To change the mode between Personal and Free, press and hold the button on the device and then switch the master card on the reader.
- For short press actions, use the push-button on the device.
- For long press actions, hold the push-button for 5 seconds.
- When prompted for a password, enter “0 0 0”.
- Optional settings can be changed by selecting “Cambia” for change or “Conferma” for confirmation.
- The product supports a maximum power of 3.0KW and a minimum current of 6.0A.
- Additional optional features include time range adjustment, unbalance control, and fault detection.
ART. 205.Wxx
MOUNTING
WIRING
WORKING
CHANGE MODE
-
Personal → Free
With button pressed down, switch the master card on reader. -
Free → Personal
With button pressed down, switch the master card on reader.
NOTES
This device shall be installed and maintained by qualified personnel.
The manufacturer can not be held responsible for any failure to comply with
these instructions.
To download the user manual of charging stations visit our website:
https://www.emobility-scame.com/web/ita/download
POWER MANAGEMENT
Additional energy meter connection
- http://ecomobility.scame.com
- Download: User manual
CONFIGURATION
WORLDWIDE
ScameOnLine
www.scame.com
e-mobility@scame.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>