Ozeri PD4X3Y 4x3motion Digital Pocket 3D Pedometer User Manual
- June 13, 2024
- Ozeri
Table of Contents
Ozeri PD4X3Y 4x3motion Digital Pocket 3D Pedometer
Product Information
The TRI-AXIS (3D MOTION) PEDOMETER by OZERITM is a pedometer that uses a Lithium battery (CR2032 installed). It automatically powers off after 30 seconds of inactivity to preserve battery life. The pedometer can be programmed with personal data such as weight and stride, and it has a calendar function. It also has the ability to store historical data for the last 7 days.
Warnings
Please read the user manual and keep it for future use. If contact is made
with a leaking battery, immediately flush the affected area with running water
and contact your local poison control center or seek medical attention. You
may also call the National Button Battery Hotline at 202 625-3333.
Programming the Pedometer
To program the pedometer with your personal data and set the calendar,
follow these steps:
- Switch to the CALENDAR screen by pressing SET 3 times from the TODAY STEP screen.
- Press and hold SET for 2 seconds to switch the pedometer into SETUP mode.
- Enter your weight, stride, and adjust the calendar date and time using the / buttons.
- Press SET briefly when finished.
After programming, the pedometer will exit SETUP mode and switch to TODAY mode.
Using the Pedometer
To check historical data for the last 7 days, follow these steps:
- From the STEP screen, press / to cycle through the last 7 days of STEP.
- From the KCAL screen, press / to cycle through the last 7 days of KCAL MEMORY.
- From the DISTANCE screen, press / to cycle through the last 7 days of DISTANCE MEMORY.
- From the STOPWATCH (MINUTES) screen, press / to cycle through the last 7 days of TIME MEMORY (time spent walking).
- From the MILE/H screen (AVERAGE SPEED), press / to cycle through the last 7 days of AVERAGE SPEED MEMORY.
To review 7-day historical data, press SET from the TODAY STEP screen to enter into 7-day TOTAL MEMORY mode. Press MODE once to cycle through different types of data stored in TOTAL memory.
In SPLIT mode, you can reset intervals to count the number of steps at a given time. From the default TODAY STEP screen, press the SET key twice to access SPLIT MODE.
TRI-AXIS (3D MOTION) PEDOMETER BY OZERI™
Congratulations on your purchase of the 4x3motion Pedometer, by Ozeri. This
pedometer is a great exercise tool that tracks the total number of steps you
take and the total time you spend walking, along with the distance you walk
and calories you burn. This pedometer’s motion sensor is optimized to detect
steps while walking. The data is tracked daily and the daily memory is
automatically reset at midnight. Even though daily memory is reset at
midnight, this pedometer will still add each day’s data to the total memory,
accumulating data for up to 7 days.
This pedometer uses a Lithium battery (CR2032 installed). It automatically
powers off after 30 seconds of inactivity to preserve battery life. To change
the battery all you will need a standard mini-screwdriver, similar to the type
used on eye glasses.
When setting up your pedometer for the first time, you will need to enter your
walking stride [the distance between your steps]. To measure your stride, it
is recommended that you calculate an average in the following way: Walk 10
steps notating your starting position and ending position. Measure the
distance between your starting and ending position. Divide this total distance
by 10 to get your average stride. For example, if the total distance you
walked over 10 steps is 330 inches, your average stride would be 33 inches (or
2 feet 9 inches). Note: To ensure accuracy, this pedometer will not begin
counting steps until it detects motion resembling approximately 13 continuous
steps. This pedometer may not accurately count steps in the following
conditions:
- When the unit moves irregularly. This can occur when the pedometer is changing its orientation, such as when loose in a purse or bag, or if hanging from a belt.
- When walking at an inconsistent pace. This can occur when wearing shuffles or sandals, or when you are constantly stopping such as in a crowded place.
- During Up and Down movement. This can occur when exercising in ways other than walking, or when ascending or descending on a steep staircase.
- When placed in close proximity to a cell phone.
Note: It is recommended that the pedometer be set in your desired unit of measurement before first use. To change the unit of measurement, press and hold MODE for 5 seconds to switch from the Metric units [KM/H] to the Imperial units [MILE/HOUR]. Changing the unit of measurement will erase all stored data.
WARNINGS
PLEASE READ FIRST AND KEEP THIS MANUAL FOR FUTURE USE
- This pedometer is not a toy. Keep this pedometer away from children. The pedometer contains small pieces that can be swallowed. The pedometer’s lanyard can cause strangulation.
- Always contact your healthcare provider before undertaking a weight loss or exercise regimen.
- Operate this unit only as intended.
- Do not swing the pedometer by the lanyard. Doing so may cause injury.
- Be careful when placing the pedometer in your shorts or trousers not to sit on it while it is still in your pocket. This may damage the pedometer.
- When replacing the batteries, please ensure that the batteries are correctly aligned by polarity (+/-).
- It is recommended that the battery be removed if this device will not be used for an extended period of time.
- Do not dispose of battery in a fire. This may cause an explosion. Dispose of battery at your local recycling center to avoid pollution and unlawful disposal.
- Do not expose this product to rain or extreme conditions.
- Do not attempt to disassemble this product. It has no serviceable parts.
- This product is battery operated. Improper use of this product may cause battery to leak or explode, which may cause personal injury. If contact is made with a leaking battery, immediately flush affected area with running water and contact your local poison control center or seek medical attention. You may also call the National Button Battery Hotline at 202 625-3333.
PROGRAMMING THE PEDOMETER
To program the pedometer with your personal data (weight and stride) and to set the calendar, first switch to the CALENDAR screen (from the TODAY STEP screen, press SET 3 times to get to the CALENDAR screen). From the CALENDAR screen press and hold SET for 2 seconds. This will switch the pedometer into SETUP mode. The following is the sequence of screens to program:
Weight > Stride > Year > Month > Day > Hour > Min > 12/24 Hour
Start by entering your WEIGHT (indicated by “W”), followed by your STRIDE (indicated by “S”), followed by the CALENDAR date and time functions. Use the / buttons to make adjustments. When finished, press SET briefly.
After all screens have been programmed, the pedometer will exit SETUP mode and the LCD will switch to TODAY mode.
The following are the data ranges for the main programmable functions:
- Weight range: 20~150kg/40~350lb
- Stride range: 30~120cm/10~50in
- Year range: 2000~2099
MAIN BUTTON FUNCTIONS
- MODE key: Scrolls through the pedometer’s various modes (STEPS / KCAL / DISTANCE / TIME EXERCISED /AVERAGE SPEED). Please note that the MODE key is disabled when the LCD is displaying the CALENDAR). Note: It is recommended that the pedometer be set in your desired unit of measurement before first use. To change the unit of measurement, press and hold MODE for 5 seconds to switch from the Metric units [KM/H] to the Imperial units [MILE/H]. Changing the unit of measurement will erase all stored data.
- SET key: Press SET KEY to scroll between TOTAL STEPS / SPLIT STEPS / CALENDAR MODE / TODAY’S STEPS. In TODAY MODE (TODAY’S STEPS), press and hold SET KEY for 2 seconds to turn on EL Blue Back light (light will last 8 seconds) In SPLIT MODE press and hold SET KEY 2 seconds to erase the SPLIT memory. Note: the data stored TOTAL and TODAY modes will not be erased. In CALENADR MODE press and hold SET 2 second to enter SETUP mode.
- UP / DOWN keys: In TODAY MODE press to display the last 7 days of STEP memory. The date on the bottom right window of LCD will scroll through 7 days of history. In SPLIT MODE press to change the Interval from 1, 2, or 3. In SPLIT mode the intervals can be reset to count the number of steps at a given time. This can be helpful for counting the steps for an event or for determining the number of steps taken between any 2 points.
USING THE PEDOMETER
The default screen of the pedometer is the TODAY screen. From the TODAY screen, press the MODE key to cycle between the STEP, KCAL, DISTANCE, TIME, and SPEED displays. Each will display a respective total for a given day, as indicated by the CALENDAR on the bottom of the screen. Note: the daily (TODAY) memory is reset at midnight. The TOTAL memory is automatically calculated by the pedometer by adding each day’s data to the TOTAL, up to 7 days. To erase the pedometer’s data for TODAY and TOTAL, a system reset must be performed (see SYSTEM RESET in manual).
DISPLAY SEQUENCE
- Step > Kcal > Mile > Min > Mile/H
- Kcal range:0~99,999.9
- Minute range:0~99,999 min (Time spent walking)
- Step range:0~999,999
- Distance range:0.00~999.99km (624 miles)
- Mile/H range: 0.00~62.07mile/H (Speed)
CHECKING HISTORICAL DATA (LAST 7 DAYS)
FROM TODAY STEP SCREEN: From the STEP screen, press to cycle through the
last 7 days of STEP.
FROM THE KCAL SCREEN: From the KCAL screen, press to cycle through the last 7 days of KCAL MEMORY.
FROM THE DISTANCE SCREEN: From the DISTANCE screen, press to cycle through the last 7 days of DISTANCE MEMORY.
FROM THE STOPWATCH (MINUTES) SCREEN: From the STOPWATCH screen, press to cycle through the last 7 days of TIME MEMORY (time spent walking).
FROM THE MILE/H SCREEN (AVERAGE SPEED): From the AVERAGE SPEED screen, press to cycle through the last 7 days of AVERAGE SPEED MEMORY.
REVIEWING 7 DAY HISTORICAL DATA
From the TODAY STEP screen, press SET to enter into 7 day TOTAL MEMORY mode
(indicated by TOTAL appearing on the top left of the screen).
Press MODE once respectively to cycle from TOTAL STEP, TOTAL KCAL, TOTAL
DISTANCE, TOTAL TIME (MINUTES), and TOTAL AVERAGE SPEED (average calculated
over 7 days).
Note: The data stored in TOTAL memory can only be erased via a system reset (see SYSTEM RESET in manual). After 10 seconds of inactivity, the pedometer will default back to the TODAY STEP screen.
USING SPLIT MODE
In SPLIT mode the intervals can be reset to count the number of steps at a
given time. This can be helpful for counting the steps for an event, or for
determining the number of steps taken between 2 points. From the default TODAY
STEP screen, press the SET key twice to access the SPLIT MODE (indicated by
SPLIT appearing on top left of screen).
From the SPLIT screen, press MODE key to cycle between the SPLIT STEPS, SPLIT
KCAL, SPLIT DISTANCE, SPLIT TIME and SPLIT AVERAGE SPEED. Press the keys cycle
between the SPLIT 1 > 2 > 3 intervals.
Note: The SPLIT data can be erased without a system reset. From the SPLIT screen, press and hold the SET key for 3 seconds to clear the SPLIT data.\ After 10 seconds of inactivity, the pedometer will default back to the TODAY STEP screen. To erase all data stored in TODAY and TOTAL MODE, a system reset is required (see SYSTEM RESET in manual).
SYSTEM RESET FUNCTION
To delete all recorded data including programmed user data (stride, weight,
calendar, & time), press into the reset hole located on the back of the
pedometer. Be careful not to use a sharp object as this may puncture the
pedometer.
ACTIVATING THE BLUE EL BACKLIGHT
In TODAY MODE, press and hold SET button for 2 seconds to turn on the EL Back
light. The backlight will remain active for 8 seconds.
SLEEP MODE
To prolong battery life, the pedometer will automatically enter into SLEEP
mode after 30 seconds of no movement.
CHANGING METRIC (EUROPE) / IMPERIAL (USA) UNITS
Note: Changing the unit of measurement will erase all stored data. To
change the unit of measurements, press and hold MODE key for 5 seconds while
in TODAY mode. LCD will activate a FULL-SCREEN display for 2 seconds, and then
switch to SETUP mode. In SETUP mode you will have to re-program in yourweight,
stride, and calendar settings (see below for SETUP mode).
ATTACHING (WEARING) THE PEDOMETER
This pedometer will accurately measure steps taken while in a pocket, bag,
purse or attached to a belt. The 3D sensor in this pedometer requires no
vvertical orientation. The pedometer can rest flat, upwards, on its side, or
at any other angle. The pedometer can hang on your neck via the included
lanyard. When placed in a container, such as a bag or purse, it is recommended
that the pedometer sit tight to prevent it from bouncing, as this can cause
inaccuracy and/or damage if it bounces against a hard object. Note: This
pedometer is not a toy. Keep this pedometer away from children. The
pedometer’s lanyard can cause strangulation.
REPLACING THE BATTERY
Replace the battery when the low battery indicator appears on the screen, or
if the LCD fails to turn on. To open the battery compartment, use a standard
mini Philips screwdriver. Replace the old battery with a new Lithium CR2032
battery, being careful to align the new battery according to the correct +/-
polarity. Close the battery door, attach and tighten screw.
OZERI CUSTOMER SERVICE
Phone: 1-877-299-1296
Email: support@ozeri.com
(Ozeri™ and its subsidiaries assume no liability for damage caused by the use
of the Pedometer other than for its intended use or as instructed above and in
the User Manual.)
Downloaded from www.Manualslib.com manuals search
engine
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>