MuxLab 500552 Dante 2-Channel Analog Audio Decoder User Manual
- June 12, 2024
- MuxLab
Table of Contents
Dante 2-Channel Analog Audio Decoder
User Manual
500552
© MuxLab Inc. 2023
94-001005-A/SE-001005-A
Dante 2-Channel Analog Audio Decoder
Safety Precautions
To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for future reference.
- Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
- Do not dismantle the housing or modify the module. It may result in electrical shock or burns.
- Do not open or remove the housing of the device as you may be exposed to dangerous voltage or other hazards.
- To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install this product near water. Keep the product away from liquids.
- Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on the housing, unplug the module immediately.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
- Using supplies or parts not meeting the product specifications may cause damage, deterioration or malfunction.
- Refer all servicing to qualified service personnel.
- Install the device in a place with adequate ventilation to avoid damage caused by overheat.
- Unplug the power when left unused for a long period of time.
- Information on disposal of devices: do not burn or mix with general household waste, please treat them as normal electrical waste.
Copyright Notice
All contents in this manual are copyrighted, and cannot be cloned, copied, or
translated without the express permission of MuxLab Inc. Product
specifications and information in this document are for reference only, and
the content may be updated from time to time without prior notice.
Introduction
The Dante 2-Channel Analog Audio Decoder (Model: 500552) is designed to receive digital audio signals from Dante-compliant equipment, then decode and output them as analog audio signals. The unit supports balanced or unbalanced audio output and 3 level gain adjustment. It can be powered using either PoE from any PoE network switch or via local with a 12VDC power supply.
Features
- Interface Dante audio equipment to analog audio equipment
- Supports balanced/unbalanced 2ch analogue audio output
- Audio sampling rate supports 44.1kHz, 48kHz and 96kHz (24bit)
- Audio output supports 3-level gain adjustment：+18dBu, 0dBu (default) and -10dBV
- Supports 12VDC power supply and PoE function (IEEE802.3af Class 0)
- Supports AES67 RTP audio transport
Package Contents
- One (1) Dante 2-Channel Analog Audio Decoder
- One (1) 6pin-3.81mm Phoenix Connector (male)
- One (1) 2pin-3.81mm Phoenix Connector (male)
- One (1) User manual (available via download)
Notes：Confirm that the product and accessories are all included. If not, please contact the supplier from which you purchased the unit.
Specifications
Technical
Video Network Bandwidth| 100M
Audio Formats| PCM 2.0 44.1kHz/48kHz/96kHz up to 24bit
Transmission Distance| 100m (CAT6/6A)
Control Method| Dante Controller
Connection
Inputs| 1 x DANTE [RJ45 connector, PoE] 1 x PWR [2-pin phoenix, 3.81mm]
Output| 1x AUD [6-pin phoenix, 3.81mm]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions (WxDxH)| 120mm[W] x 47mm[D] x 26mm[H]
Weight| 186g
Power Supply| DC input: 12V PoE input: IEEE802.3af Class 0
Power Consumption| 1.32W
Operation Temperature| 32 – 104°F / 0 – 40°C
Storage temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)
arranty| 2 years
Order Information| 500552 Dante 2 Channel Analog Audio Decoder (UPC:
627699005521)
Operation Controls and Functions
| No | Name | Function Description |
|---|---|---|
| 1 | DC IN | DC 12V power input port. |
| 2 | Audio Output (CH1/CH2) | 2 channel analog audio output ports, supporting |
balanced and unbalanced audio.
3| Dante PoE| Dante digital audio output port. Connect to the Network Switch
through RJ45
line, supporting PD power supply.
The green LINK LED is flashing when there is data transmission.
The yellow DATA LED is always on after normal connection
4| Gain Switch| Used for audio output gain adjustment, respectively +18dBu,
0dBu (default), -10dBV.
Application Diagram
Dante 2-Channel Analog Audio Decod500552
Follow us: 2321 Cohen | St-Laurent , H4R 2N7 | Québec, Canada
Tel: 514-905-0588 |
Fax: 514-905-0589
Toll free: 1-877-689-5228
info@muxlab.com
salesteam@muxlab.com
www.muxlab.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>