frisco 370357 Deluxe Plastic Outdoor Dog House Instruction Manual
- June 12, 2024
- frisco
Table of Contents
frisco 370357 Deluxe Plastic Outdoor Dog House
OVERVIEW
WARNINGS & CAUTIONS
PLEASE READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS TO AVOID PET INJURY OR PROPERTY DAMAGES.
- This product is not for human use. Please, never allow children to play in or on the house. For dog use only.
- Follow the instructions carefully and make sure you’ve completed each step.
- Keep away from heat sources and open flames.
- Do not sit on, climb on or shake the product!
- This plastic product is suitable for providing temporary shelter for your pets in an outdoor environment.
- Choose a location that is leveled and dry, as well as being as sheltered from the weather as possible.
- Check your dog house often for loose screws or parts that might need re-tightening.
- If your dog house gets torn or damaged, please discard it.
- The product photo may vary slightly from your fully assembled dog house as this product is continually being enhanced.
COMPONENTS
- Prior to assembly, be sure to identify and sort all components shown below.
ASSEMBLY INSTRUCTIONS
Tip: This item has predrilled holes to make set up easier for your dog’s home.
STEP 1
Connect bottom panel (5).
STEP 2
Insert side panel (3) into notches.
STEP 3
Turn the house on its side and insert side panel (3) into
notches.
STEP 4
Turn the house vertically to attach the back panel (2) by placing it into the
notches on panel(3).
STEP 5
Flip the house to rest the back panel (2) on the floor and insert the front
panel (1) into the notches.
STEP 6
Connect the roof panel (4).
STEP 7
Place the connected roof pane onto the house starting with the notches closer
to the center of the roof and attach the corners once the middle is fully
secured.
FINISHED ASSEMBLY
SKU# 370357 OVERALL DIMENSIONS M: 38.5 in L x 33 in W X 32 in H 98 cm L x 84 cm W x 81 cm H Questions? Call our customer service 1-800-672-4399
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>