AV Access HDEX80-KVM 1080P HDMI KVM Extender User Manual

AV Access HDEX80-KVM 1080P HDMI KVM Extender

Introduction

Overview

This product extends full HD HDMI signal up to 80m/260ft via a single Cat X cable, without any video loss and time delay. It supports USB 2.0 pass- through. With USB Host connector in transmitter, and USB Device connectors in receiver, it provides remote source PC control with keyboard and mouse, interactive display operation, data transmission and USB streaming over distances up to 80m/260ft. It has many professional designs which suitable for various application scenario, especially for engineering project usage. Two- way PoE (Power over Ethernet), integrates power into the Cat 5e/6 cable, only one power adapter is needed to either transmitter or receiver.

Features

• Extends full HD HDMI signal up to 80m/260ft via a single Cat X cable without signal loss and delay.
• Extends high speed USB 2.0 signal (480Mbps) up to 260ft/80m, provides 2xUSB 2.0 ports at display end.
• Supports two-way PoE (Power over Ethernet), only one power adapter is needed to either transmitter or receiver.
• Auto EDID management automatically adjusts to overcome compatibility issues.
• Plug and play, no driver needed.

Package Contents

Before you s tart the installation of the product, plea se check the package contents:

• Transmitter x 1
• Receiver x1
• Power Adapter (DC 12V 2A) x 1
• USB type-A to type-A Cable x 1
• Mounting Brackets (with Screws) x 4
• User Manual x 1

Panel

Transmitter

Receiver

Installation and Application

Brackets Installation

Note: Before installation, please ensure the device is disconnected from the power source.

1. Attach the installation bracket to the enclosure using the screws that were provided in the package separately. The bracket height can be adjusted up/down or bracket face up or down.
2. Attach the brackets to the surface you want to hold the unit against using the screws (provided by others).

Application

Installation requirements:

• USB devices: With USB2.0 input interfaces, keyboard, mouse, camera, Mic, mobile HD etc. (Users should insert the power adapter to receiver when connected the hard disk to the USB port)
• Cat X cables: UTP/STP Cat5e/6/6a cable, which following the standard of IEEE-568B. And the distance of the cable should no more than 80m.
• One power adapter is needed to be connected to the transmitter/receiver to power both units.

Specifications

Warranty

Products are backed by limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable.

1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
4. The defects are caused by any force majeure including but not limited to accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by salesman only but not covered by normal contract.
6. AV Access Technology Limited preserves the right for interpretation of these cases above and to make changes to them at any time without notice.

Thank you for choosing products from AV Access.

If you have any question, please contact us via the following emails:
General Enquiry : info@avaccess.com
Customer/Technical Support: support@avaccess.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>