ICY BOX IB-DK408-C41 Mobile USB4 Notebook DockingStation User Manual
- June 12, 2024
- ICY BOX
Table of Contents
- ICY BOX IB-DK408-C41 Mobile USB4 Notebook DockingStation
- Product Information
- Product Usage Instructions
- Potential Data Loss
- Cleaning the Device
- Disposing of the Device
- Package content
- Starting up
- Standard
- Advanced display settings
- macOS® Display configuration
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ICY BOX IB-DK408-C41 Mobile USB4 Notebook DockingStation
Product Information
The product is the IB-DK408-C41, a device that provides multiple USB ports and charging support. It is equipped with USB 3.2 Gen 2 Type-A interfaces that allow data transfer rates of up to 10 Gbit/s. It also supports Power Delivery 3.0 with PD support up to60 watts.
USB Version Information
The USB version information for this product is as follows:
- Legacy USB standards: USB 3.0 = USB 3.1 (Gen 1) = USB 3.2 Gen 1 = 5 Gbit/s
- Current USB standards: USB 3.1 = USB 3.1 (Gen 2) = USB 3.2 Gen 2 = 10 Gbit/s
- USB 3.2 (Gen 2×2) = USB 3.2 Gen 2×2 = 20 Gbit/s
- USB4 Gen 3×2 = 40 Gbit/s
Product Usage Instructions
To prevent injuries, damage to material and device, as well as data loss, it is important to follow the instructions below:
Risk of Electrical Shock
- WARNING: Contact with parts conducting electricity can result in death by electrical shock. Exercise caution when handling the device.
Hazards During Assembly
- CAUTION: There is a potential risk of injuries to fingers or hands during assembly. Take care when assembling the device.
Hazards Caused by the Development of Heat
IMPORTANT
- Insufficient device/power unit ventilation
Overheating and failure of the device/power unit
- Prevent externally heating up components and ensure an exchange of air
- Do not cover the fan outlet and passive cooling elements
- Avoid direct sunlight on the device/power unit
- Guarantee sufficient ambient air for the device/power unit
- Do not place objects on the device/power unit
- IMPORTANT: Insufficient device/power unit ventilation can lead to overheating and failure of the device/power unit. Ensure proper ventilation for the device.
Hazards Caused by Very Small Parts and Packaging
- WARNING: There is a risk of suffocation or swallowing of small parts for children. Keep small parts and packaging away from children to prevent accidents.
WARNING
- Risk of suffocation
Risk of death by suffocation or swallowing
- Keep small parts and accessories away from children
- Store/dispose of plastic bags and packaging in an area that is inaccessible to children
- Do not hand over small parts and packaging to children
Potential Data Loss
- IMPORTANT: Data loss can occur during commissioning, resulting in potentially irreversible data loss. Take necessary precautions to backup important data before using the device.
IMPORTANT
- Data lost during commissioning
Potentially irreversible data loss
- Always comply with the information in the operating instructions/quick installation guide
- Exclusively use the product once the specifications have been met
- Back up data prior to commissioning
- Back up data prior to connecting new hardware
- Use accessories enclosed with the product
Cleaning the Device
- IMPORTANT: Use only appropriate cleaning agents to avoid scratches, discolouration, and damage caused by moisture. Follow the recommended cleaning instructions provided in the manual.
IMPORTANT
- Harmful cleaning agents
Scratches, discolouration, damage caused by moisture or short circuit in the device
- Disconnect the device prior to cleaning
- Aggressive or intense cleaning agents and solvents are unsuitable
- Make sure there is no residual moisture after cleaning
- We recommend cleaning devices using a dry, anti-static cloth
Disposing of the Device
- IMPORTANT: Improper disposal of the device can lead to environmental pollution and is unsuitable for recycling. Dispose of the device according to local regulations or bring it to a recycling collection point in your community.
IMPORTANT
- Environmental pollution, unsuitable for recycling
Potential environmental pollution caused by components, recycling circle interrupted
- This icon on product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE) this electrical device and potentially included batteries must not be disposed of in conventional, domestic waste or recycling waste. If you would like to dispose of this product and potentially included batteries, please return it to the retailer or your local waste disposal and recycling point.
If you have any further questions or need assistance, please contact our
support team at support@raidsonic.de or visit
our website at www.icybox.de.
Please read carefully the following information to prevent injuries, da-mage
to material and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate
information in terms of the probability of occurrence as well as the type and
severity of the consequences if the measures to prevent hazards are not
complied with.
DANGER
Warns of a directly hazardous situation causing death or serious injury.
WARNING
Warns of a potentially hazardous situation that may cause death or serious
injury.
CAUTION
Warns of a potentially hazardous situation that may cause minor injury.
IMPORTANT
Warns of a potential situation that may cause material or environmental damage
and disrupt operative processes.
Risk of electrical shock
-
WARNING
Contact with parts conducting electricity Risk of death by electrical shock -
Read the operating instructions prior to use
-
Make sure the device has been de-energized prior to working on it
-
Do not remove contact protection panels
-
Avoid contact with conducting parts
-
Do not bring plug contacts in contact with pointed and metal objects
-
Use in intended environments only
-
Operate the device using a power unit meeting the specifications of the type plate only!
-
Keep the device/power unit away from humidity, liquid, vapour and dust
-
Do not modify the device
-
Do not connect the device during thunderstorms
-
Approach specialist retailers if you require repairs
Hazards during assembly (if intended)
CAUTION: Sharp components
Potential injuries to fingers or hands during assembly (if intended)
- Read the operating instructions prior to assembly
- Avoid coming into contact with sharp edges or pointed components
- Do not force components together
- Use suitable tools
- Use potentially enclosed accessories and tools only
Package content
1x IB-DK408-C41, 1x Manual
View
-
RJ45 Gigabit LAN interface
-
HDMI® 2.1 interface with up to 8K@30 Hz
-
DisplayPort™ 1.4 interface with up to 8K@30 Hz
-
2x USB 3.2 Gen 2 Type-A interface, data transfer rates up to 10 Gbit/s, charging support 5 V/0.9 A
-
3.5 mm headset combo jack
-
USB4® Type-C® host computer interface
-
USB 3.2 Gen 2 Type-C® interface, data transfer rates up to 10 Gbit/s, Power Delivery 3.0 with PD support up to 60 watts.
USB version information
Legacy USB standards| Current USB standards| Data transfer rate
USB 3.0 = USB 3.1 (Gen 1)| = USB 3.2 Gen 1| = 5 Gbit/s
USB 3.1 = USB 3.1 (Gen 2)| = USB 3.2 Gen 2| = 10 Gbit/s
USB 3.2 (Gen 2×2)| = USB 3.2 Gen 2×2| = 20 Gbit/s
–| = USB4 Gen 3×2| = 40 Gbit/s
Requirements
- Available Thunderbolt™ 4, Thunderbolt™ 3, USB4® or USB Type-C® host computer
- Thunderbolt™ 4, USB4® is required to achieve 8K resolution
- Also supports other USB 3.2 host computers and lower resolution monitors/displays
- Wide compatibility with various operating systems and devices
- Plug & Play, no driver installation required
USB Type-C®
Not all USB Type-C® host ports support the full functionality of the USB4®
Type-C® standard. Some ports might only provide data transfer without
supporting Power Delivery or DP Alt Mode over USB.
USB Type-C™ ≠ USB Type-C™
- Important
This ICY BOX product requires the usage of DisplayPort™ Alt Mode technology over the USB Type-C™ connector. Not all computers, notebooks or tablets with a USB Type-C™ interface support the DisplayPort™ Alt Mode. Please check the specifications of your computer system as well as its USB Type-C™ interface or use the ICY BOX product with a Thunderbolt™ 3 connector. To use this dock to its full potential, make sure that the host USB Type-C® port of your computer supports USB Power Delivery, DP Alt Mode and Thunderbolt™ 3/4 or USB4®. Please consult your host PC documentation or contact the PC manufacturer to confirm compatibility with these technologies. For safety, check whether the host PC Bios Version is the latest and confirm compatibility with USB Type-C® Power Delivery and/or DP Alt Mode before application.
Starting up
-
Connect the USB4® Type-C® cable to the supported USB Type-C® interface of your computer.
-
Connect your devices to the corresponding interfaces of the dock.
Optional: To charge the notebook while using the DockingStation, please connect a USB Type-C® power supply unit with Power Delivery support (not included) to the Type-C® PD interface of the DockingStation.
MAXIMUM RESOLUTIONS | Inputs (plug-in) | Output | |
---|---|---|---|
Number of displays | DP 1.4 | HDMI ® 2.1 | |
Display 1 | Display 2 |
Video matrix (Host PC = Windows Alternate mode systems (HBR2), maximum
resolutions
Dual video output| ✓| ✓| 1920×1080@60 Hz| 1920×1080@60 Hz
Single video output| ✓| | 3840×2160@30 Hz|
| ✓| | 3840×2160@30 Hz
Video matrix (Host PC = Windows
Alternate mode systems (HBR3), maximum
resolutions
Dual video output| ✓| ✓| 2560×1440@60 Hz| 2560×1440@60 Hz
Single video output| ✓| | 3840×2160@60 Hz|
| ✓| | 3840×2160@60 Hz
Video _matrix (Host PC = Windows Alternate mode systems (HBR3 with
DSC), maximum resolutions_
Dual video output| ✓| ✓| 3840×2160@60 Hz| 3840×2160@60 Hz
Single video output| ✓| | 3840×2160@144Hz|
| ✓| | 3840×2160@120 Hz
Video matrix (Host PC = Windows USB4 ® systems (HBR3 with
DSC**), maximum resolutions
Dual video output| ✓| ✓| 3840×2160@120 Hz| 3840×2160@120 Hz
Single video output| ✓| | 7680×4320@30Hz|
| ✓| | 7680×4320@30Hz
Video matrix (Host PC = Mac* USB4 ® systems ( > M1 chip),
maximum resolutions
Dual video output| ✓| ✓| 6010x 3384@60 Hz only mirrored (SST)
Single video output**| ✓| | 6010×3384@60 Hz|
| ✓| | 6010×3384@60 Hz
- macOS® based computers only support SST (Single Stream Protocol), so the video output on the displays is the same.
- DSC (Display Stream Compression) support necessary
Configure a display device
Please set up your display settings according to your operating system and
requirements. For detailed information refer to the corresponding operation
manual and descripti-on of your operating system.
Note: Video output capabilities are dependent on the video graphics card
and hardware specifications of your connected host computer. Certain video
graphics cards and operating systems have limited MST and DisplayPort™
support, while some monitors will also limit the available resolution.
Supported video resolutions
The IB-DK408-C41 supports up to 4K/8K (Ultra HD) resolutions if the connected
display and the graphics unit support it.
Windows® display configuration
Note: The screenshots might vary slightly with the operating system.
Arrange your displays
Once the extra monitors are connected, they can be configured to either mirror
mode, extended mode or to the setting of the primary display.
e.g: extending your monitors
-
Position the mouse anywhere on the Windows® desktop
-
Right-click and select Display settings to bring up the configuration window.
-
Refer to the Display configuration section
-
- Identify your monitors by clicking the Identify button.
-
Select the relevant monitor for the following settings by clicking the identified monitor symbol
-
Select Multiple displays > Extend desktop to this display if you wish to extend a monitor.
-
Click Keep changes to confirm and exit.
-
Once the setting is completed, simply drag and drop the application icons to arrange your monitors. (However, some applications may not support the display on the extended desktop
Setting the right resolution and frequency of your displays
There are two possibilities to choose the resolution of the selected monitor:
Standard
-
Identify your monitors by clicking the Identify button.
-
Select the relevant monitor by clicking the identified monitor symbol.
-
Click on Display resolution
-
Choose the right resolution from the drop-down menu. Refer to the video matrix table!
-
Click Keep changes to confirm and exit.
Advanced display settings
- Identify your monitors by clicking the Identify button.
- Click on Advanced display settings
A new page opens up
- Select the relevant monitor by clicking Choose display
- Click on Display adaptor properties for Display X
A new window opens up
- Click on List All Modes
A new window opens up
- Click on a valid mode according to your demands.
Repeat for each attached monitor if necessary.
macOS® Display configuration
Once the extra monitors are connected, they can be configured to mirror mode or extend mode.
-
Click on System Preferences
-
Click on Displays
A new window opens up
-
Click Arrangement
-
Select the corresponding monitor symbol by clicking and holding the symbol of the monitor that shall be placed in order to do the positioning.
To set up scaled resolutions of the monitor displays, click the Display tab. In the window that now opens for the respective display, you can set your desired resolutions separately. Select the option Scaled and then select the appropriate size in the field below.
Advanced display settings
Hold down the option key and click on Scaled again and an advanced menu for
setting resolution and repetition frequency opens. Please select your
preferred settings here.
Repeat for each attached monitor if necessary.
© Copyright 2023 by RaidSonic Technology GmbH. All Rights Reserved.
The information contained in this manual is believed to be accurate and
reliable. RaidSo-nic Technology GmbH assumes no responsibility for any errors
contained in this manual. RaidSonic Technology GmbH reserves the right to make
changes in the specifications and/or design of the above-mentioned product
without prior notice. The diagrams contained in this manual may also not fully
represent the product that you are using and are there for illustration
purposes only. RaidSonic Technology GmbH assumes no responsibility for any
differences between the product mentioned in this manual and the product you
may have. DisplayLink® is the registered trademark of DisplayLink Corp. in the
EU, the US, and other countries DisplayPort™ and the DisplayPort™ logo are
trademarks owned by the Video Elec-tronics Standards Association (VESA®) in
the United States and other countries. The terms HDMI® and HDMI® High-
Definition Multimedia Interface, and the HDMI® logo are trade-marks or
registered trademarks of HDMI® LA, Inc. in the United States and other
countries. Apple and macOS are registered trademarks of Apple Computer Inc.
Microsoft, Windows and the Windows logo are registered trademarks of Microsoft
Corporation.
References
- ICY BOX
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.