Baseus BS-PS030 Smooth Writing 2 Series Plug-Type Stylus iP Active Wireless Pen User Manual

Baseus BS-PS030 Smooth Writing 2 Series Plug-Type Stylus iP Active

Wireless Pen

OVERVIEW

Shortcut Button Customization

• HOME Button Previous Page
• Power Button Next Page
• Brightness + Mute
• Brightness- Search
• Recently Used Apps Photograph
• Volume + Quick Screenshot
• Volume – Editable Screenshot

Specifications

• Name: Baseus Smooth Writing 2 Series Plug-Type Stylus iP
• Active Wireless Version
• Model No.: BS-PS030
• Material: Aluminum alloy barrel, plastic POM nib
• Pairing Name: Baseus-PS030
• Charging Connector: iP
• Battery Capacity: 130mAh
• Accessories: USB-A to iP cable X1 Active pen tip X 1, user manualX1

Compatible Model

Indicator

Working

Charging

Instructions

Bluetooth Connection:

1. Press and hold the power button to turn on the stylus, indicator flashes blue, entering pairing mode;
2. Go to “Settings” on your iPad, click Bluetooth and select “Baseus-PS030” to pair;
3. “Connected” prompts up, and indicator goes out, meaning the pairing is successful, you can check the battery level of the stylus in your iPad.

APP Connection:

1. Download the Baseus APP in App Store;
2. Turn on the stylus and connect to the Bluetooth of your iPad;
3. Add the stylus in the Baseus App, it’s under the Lifestyle & Office catalogue;
4. Make sure the stylus is not connected to other device and the remaining battery is sufficient during the connection process;
   Note: If the connection fails, please restart the stylus and try again;

Customization Function Setup

1. Open the Baseus APP, after you add the stylus to the app, go to the stylus page, select “Double-press Setup” and “One-press Setup” to customize the shortcut functions.
   Note: The default setting for double-press is screenshot. Default setup as follows, connect to the Bluetooth of the device to use the shortcut functions.

Use without Connecting to Bluetooth:

• Press and hold the power button to turn on the stylus, after 3min of flashing, the indicator stays on, and then you can use the stylus.

Turn off the stylus:

• Press and hold the power button to turn off the stylus.
  Note: The stylus will automatically turn itself off after 5 minutes of no operation.

Use

1. You can use the stylus instead of your fingers to tap, drag on the screen. Or use it to write, draw in some apps.
2. Full-screen palm rejection allows you to place your hand on the screen during writing, and you can adjust the thickness of the stroke by tilting the pen tip.
3. Press/double-press the Up/Down button to use the shortcut functions.

Battery Charging

1. Plug the iP connector into the iP port of your iPad to charge.
2. Connect one end of the USB-A to iP adapter cable to the iP connector of the stylus and the other to an USB-A port for charging.

Declaration on hazardous substances and elements contained in electronic products

This form is compiled in accordance with SJ/T 11364. O:It indicates that the content of the harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard. X: The content of harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard. Warm Tip: The 5-year icon refers to the “effective life of environmental protection”, not the product quality assurance period. Electronic products all contain harmful substances such as lead, mercury and cadmium. Once they are overused, harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term of “environmental protection use” means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

It is hereby declared that BS-PS030, a product model of Shenzhen Baseus Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU, Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com

• This equipment complies with the provisions of Directive 2012/19/EU.
2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.

FCC ID:2A482-BS-PS030

Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB 4943.1
Hotline: +86-4000-712-711 Website: www.baseus.com
Official After-sales E-mail Address: service@baseus.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>