nVent HOFFMAN WF100LP WeatherFlo Fan Wiring Schematic Instructions
- June 12, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN WF100LP WeatherFlo Fan Wiring Schematic
Product Information
This product is an electrical device that requires proper wiring for safe and efficient operation. It is important to follow all applicable local codes and ordinances when installing and wiring this product. Failure to do so may result in electrical hazards or damage to the equipment.
Wiring Notes
- All wiring must comply with applicable local codes and ordinances.
- Route supply wires away from door hinge, sharp edges, etc.
WARNING
To avoid electric shock, do not energize any circuits before all internal
and external electrical and mechanical clearances are checked to assure that
all assembled equipment functions safely and properly.
Product Usage Instructions
Before using this product, it is crucial to ensure that all internal and external electrical and mechanical clearances are checked. This helps to guarantee the safe and proper functioning of the assembled equipment. Follow the steps below to use the product:
- Ensure all electrical and mechanical clearances have been checked and approved.
- Refer to the applicable local codes and ordinances for wiring requirements.
- Follow the wiring notes provided in the user manual:
- All wiring must comply with applicable local codes and ordinances.
- Route supply wires away from door hinge, sharp edges, etc.
- Take necessary precautions to avoid electric shock during the installation process.
- Once the product is properly installed and wired, ensure that all connections are secure.
- Do not energize any circuits until you have verified that all assembled equipment functions safely and properly.
By following these instructions and guidelines, you can safely and effectively use this product for its intended purpose.
Fan Wiring Schematic
Wiring Notes
- All wiring must comply with applicable local codes and ordinances.
- Route supply wires away from door hinge, sharp edges, etc.
WARNING
To avoid electric shock, do not energize any circuits before all internal
and external electrical and mechanical clearances are checked to assure that
all assembled equipment functions safely and properly.
- 2018 Hoffman Enclosures Inc. PH 763 422 2211 • nVent.com/HOFFMAN P/N 87799572
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>